|
|
The program “Primafila” is useful for public areas like auditorium, theatres and collective spaces. Version on beam and version with writing table are for scholastic, didactic and university uses. All structures are in die-cast aluminium, polished or black power gated.
Using curved beams (minimal radius 5,888 mm) we can obtain amphitheatre effect shaped by custom need.
Seat and backrest are made in multiplex plywood, with fire resistant fabrics or beech wood varnished. Special versions can be adapted to inclined floors, auditoriums or fixed to the wall.
Primafila can be equipped with frontal desk useful for didactic spaces.
Practicability and layout studies are realized by Collectivity Department of Cazzaro S.p.A.
|
|
-Chair for OPTIMIZATION of space. Occupies a depth of just 47 cm (18'3") in folded position.
-CHANGEABLE pads made in semi-integral form and upholstered in fabric or natural leather.
-TS System FIRE BARRIER for added safety.
-Chair mounted on two side pedestals with fixed armrest.
-Certified by UPC based on performance in ACOUSTIC tests. |
|
- Folding of seat is automatic and extremely SILENT.
- MAINTENANCE-FREE double hinge system.
- WOODEN backrest with double curvature for high level of COMFORT.
- TS System FIRE BARRIER for added safety.
- Certified by GARCIA BBM based on performance in ACOUSTIC tests.
- Optional writing tablet.
- Crafted upholstery (natural leather) or fabric upholstery.
- The resonator acoustic HELMHOLTZ is optional (the HELMHOLTZ RESONATOR is a system adequate for obtaining considerable improvement of the acoustic conditions of seats. It consists of a chamber in the lower part of the seat filled with tested materials for a most favorable acoustic performance & capable of increasing sound absorption in different ranges of frequencies). |
|
-Tilt of backrest is ADJUSTABLE to improve VISIBILITY and alignment of rows.
-CHANGEABLE pads upholstered in INTEGRAL FORM or natural leather.
-TS System FIRE BARRIER for added safety.
-TX acoustic absorption system.
-Certified by GARCIA BBM based on performance in ACOUSTIC tests. |
|
- A chair that provides a high level of DESIGN and COMFORT.
- Seat folds AUTOMATICALLY using a double-spring system.
- CHANGEABLE pads made in semi-integral form and upholstered in fabric or natural leather.
- TS System FIRE BARRIER for added safety.
- Certified by APPLUS based on performance in ACOUSTIC tests.
- The resonator acoustic HELMHOLTZ is optional (the HELMHOLTZ RESONATOR is a system adequate for obtaining considerable improvement of the acoustic conditions of seats. It consists of a chamber in the lower part of the seat filled with tested materials for a most favorable acoustic performance & capable of increasing sound absorption in different ranges of frequencies). |
|
- Chair with exceptional ACOUSTIC properties.
- Folding of seat is automatic and extremely SILENT.
- Mounted on an aluminium column with CENTRAL SPRING.
- TS System FIRE BARRIER for added safety.
- Optional armrests. |
|
-Chair mounted on two side pedestals with tip-up seat.
-CHANGEABLE pads upholstered in INTEGRAL FORM or natural leather.
-TS System FIRE BARRIER for added safety.
-TX acoustic absorption system.
-Certified by GARCIA BBM based on performance in ACOUSTIC tests. |
|
- System designed to OPTIMIZE SPACE AND PROFITABILITY.
- Rows of seats move along floor rails and are stored automatically under stage, leaving a completely open multipurpose space.
- Activated MANUALLY or AUTOMATICALLY.
- System equipped with Flex model chair, which, when folded, occupies a depth of only 26 cm (10’2”) in manual version, and 34 cm (13’3”) in automatic version.
- Can incorporate F45 individual desk to create COMFORTABLE INDIVIDUAL WORK CENTRE. |
|
| Impress audiences with a more refined aesthetic. Concerto seating offers contoured comfort and contemporary design. Embrace creative teaching and accommodate students' needs with optional technology support. Space efficient. Surprisingly low priced. Adapt auditoriums to multi-purpose use with tablet arms and power/data access. |
|
Design
Jouko Järvisalo
OPUS OPUS T |
|
Varius Auditorio chair -1983-
Oscar Tusquets
Backrest and seat composed of molten aluminium and skimmed in flexible polyurethane BS. Upholstery in versions of Trevira Violetta CS fabric 100% polyester: red red (50CS), orange caramel (53CS), chestnut brown (56CS), night grey (64CS); tela Ecosued 100% polyester: yellow sand (ECO125), burned orange (ECO224), luminous garnet (ECO096), green moss (ECO405), ink blue (ECO912), sparkled brown (ECO6777), sparkled blue (ECO6735) and sparkled ash-grey (ECO6799); leather: black, rosso bulgaro oder natural; or COM (Customer’s Own Material).
Standars made of molten aluminium and painted with black RAL 7021 powder.
Resonator made of polyurethane RIM. Arms composed of a steel frame and skimmed in integrated polyurethane.
The numbering system is done using the plastic sections in ABS placed in the upper part of the arms and in the lateral end of each row.
-Accessories:
Optional desk, made of a board birch wood of 15mm thickness, painted in micro textured. With left-handed option. It is not detachable accessory. Only for use on new Varius auditorio chairs.
Varius Auditorio chair without desk: 50-57 x 60 x H.82cm (H. Seat: 46cm)
Varius Auditorio chair with desk: 50-57 x 71 x H.82cm (H. Desk: 65cm)
|
|
Seat especially designed for theatres and auditorium.
Seat and backrest outer pans made of beech plywood, u-shaped, 12mm thick, bent at the sides. Upholstery is made of open-cell polyurethane foam, 110 mm thick, covered with M-1 fireproof fabrics.
Sidearms made of u-shaped steel plate, 3mm thick, closed at the back by another flat steel strip.
Armrests made of beech plywood finished with two layers of fireproof polyurethane varnish.
Folding system is based on a double inner support, consisting on spinning axles and torsion springs fixed to the seat.
Anchoring to the floor is achieved by means of a steel plate support, 10mm thick, onto which the sidearm is fixed. Every support has two orifices for its fixation to the pavement. Powder coat finishing –shade to be chosen by the customer. |
|
Seat designed for theatres and auditorium.
Seat and backrest have an asymmetrical-shaped mat made of polyurethane foam, fixed on a beech plywood core, 12mm thick, with the same dimensions. The set is covered with M-1 fireproof fabrics with an additional underlying M-1 layer, and joined to the outer structure by means of 4 steel flaps fixed to the inner side, using specific hardware.
The outer structure is also made of beech plywood, 12mm thick, finished with 2 layers of polyurethane varnish. Appearance and finishing can vary upon request.
Special design of sidearms is made of high density waterproof MDF boards, finished either with noble plywood and 2 layers of polyurethane, or upholstered just like seat and backrest.
Armrests made of solid beech wood and are bent-shaped.
Anchoring is achieved by means of a steel plate support with two solid steel pivots, specially mechanized to be inserted inside the sidearms, fixing the whole set. |
|
Seat especially designed for theatres and auditorium.
Seat and backrest made with open-cell polyurethane foam on a beech plywood core, 12mm thick, (self-extinguishable according to legal prescriptions), covered with M-1 fireproof fabrics, zipper finishing, with an additional underlying M-1 layer.
Backrest is held and protected with an outer steel shell with joints to the sidearms.
Sidearms are made of steel plate (50x5mm) and enclose the folding socket
joints, which are made of injected polyamide, very resistant to mechanical demands, and do not require maintenance. Armrests made of solid beech wood, finished with two layers of polyurethane varnish –shade to be chosen by the customer.
Fixing to the floor is achieved by means of two orifices placed at the bottom part of sidearms.
This model includes seat and row numbering. |
|
Seat designed for theatres, auditorium and conference halls.
Seat and backrest made of beech plywood, 12mm thick, framed by a thicker board, u-shaped (28mm thick), finished with 2 layers of polyurethane varnish (self-extinguishable according to legal prescriptions) –shade to be chosen by the customer.
Upholstery on seat and backrest made with polyurethane foam on a beech plywood core, covered with M-1 fireproof fabrics, with an additional underlying M-1 layer –shade to be chosen by the customer.
Sidearms made of beech plywood boards (120x60mm), with 2 layers of polyurethane varnish –shade to be chosen by the customer.
Armrests made of steel plate, 10mm thick. Epoxy powder coat finishing.
Folding joints made with lateral flaps and a solid steel axle, hiding the torsion spring.
Anchoring is achieved by means of a T-shaped steel plate support, 10mm thick, with two pivots inserted in the sidearms, fixing the whole set. |
|
Seat designed for theatres, conference halls and auditorium.
Seat and backrest have polyurethane foam mats on a beech plywood core (5mm thick), fixed to an outer shell (12mm) of beech plywood. The whole set is upholstered with M-1 fireproof fabrics, with an additional underlying M-1 layer.
Sidearms made of steel plate, 6mm thick and 60mm wide.
They hold the folding socket joints which allow the seat pan to fold by means of a spinning axle and a torsion spring. Backrest is fixed by means of two pivots, made of solid steel, using specific hardware.
Welding made under tested conditions, with bow of continuous thread and controlled atmosphere. Screws and fixing materials made of finished steel. |
|
Seat of minimal dimensions especially designed for conference halls, theatres and auditorium.
Upholstery on seat and backrest made with polyurethane foam on a beech plywood core, 12mm thick, (self-extinguishable according to legal prescriptions), covered with M-1 fireproof fabrics, zipper finishing, with an additional underlying M-1 layer –shade to be chosen by the customer.
Sidearms made of extruded aluminium, with 80-micron powder coat finishing–shade and texture to be chosen by the customer.
Armrests made of beech wood, with two layers of polyurethane varnish –shade to be chosen by the customer.
The automatic tip-up mechanism rotates seat and backrest to the fold position when the seat is vacated.
Fixing to the floor is achieved by means of metallic supports finished with electrostatic epoxy powder –shade and texture to be chosen by the customer.
This model includes seat and row |
|
Seat especially designed for theatres, auditorium and conference halls.
Seat and backrest made of beech plywood, 12mm thick, and finished with 2 layers of polyurethane varnish. Upholstery made of open-cell polyurethane foam (self-extinguishable according to legal prescriptions), covered with M-1 fireproof fabrics with an additional underlying M-1 layer –shade to be chosen by the customer.
Sidearms made of high density waterproof MDF panels finished either with beech plywood and 2 layers of polyurethane varnish, or upholstered with fireproof M-1 barrier and fabrics, just like seat and backrest.
Backrest is fixed to the set by means of two side components made of extruded aluminium. Thus, the row achieves uniformity and firmness. Sidearms also enclose the folding socket joints, which allow the seat pan to fold by means of a spinning axle and a torsion spring, determining the automatic reversion.
They enclose the folding socket joints, which are made of injected polyamide, very resistant to mechanical demands, and do not require maintenance.
Fixing to the floor is achieved by means of a steel plate support, 10mm thick, onto which the sidearm is anchored. Every support has two orifices for its fixation to the pavement. Powder coat finishing –shade to be chosen by the customer. |
|
Seat and backrest made of high-density polyurethane foam, with a frame made of steel tube and mesh, covered with M-1 fireproof fabrics with an additional underlying M-1 layer.
Sidearms made of rolled wood, 50mm thick, finished with two layers of polyurethane varnish –shade to be chosen by the customer. They hold both seat and backrest and also the folding joints, with u-shaped axles.
Armrests made of solid beech wood, finished with two layers of polyurethane varnish, fixed to sidearms by means of a steel plate, 6mm thick, placed in the inner side.
Anchoring is achieved by means of a steel plate support, 6mm thick, onto which the sidearm is fixed. Every support has two orifices for its fixation to the pavement. Epoxy powder coat finishing –shade to be chosen by the customer. |
|
Manel Bosch / Jordi Bosch / Joan Tarrús
Seat especially designed for theatres and auditorium.
Seat and backrest made of polyurethane foam, covered with M-1 fireproof fabrics with an additional underlying M-1 layer. Seat mat is fixed to a beech plywood core, 12mm thick. Backrest has a core made of syntrewood (recycled plastic material) with an outer shell made of aluminium.
Sidearms made of high density waterproof MDF panels finished with wood plates, 1.5mm thick, and 2 layers of polyurethane varnish –shade to be chosen by the customer. They also enclose the folding socket joints made of injected polyamide, very resistant to mechanical demands.
The top-side part of sidearms, i.e. the armrests, is made of solid beech wood, 10mm thick.
Fixing to the floor is achieved by means of a steel plate support onto which the sidearm is anchored. Every support has two orifices for its fixation to the pavement. |
|
Seat of minimal dimensions especially designed for conference halls, theatres and auditorium.
Upholstery on seat and backrest made with polyurethane foam on a beech plywood core, 12mm thick, (self-extinguishable according to legal prescriptions), covered with M-1 fireproof fabrics, zipper finishing, with an additional underlying M-1 layer –shade to be chosen by the customer.
Sidearms made of extruded aluminium, with 80-micron powder coat finishing–shade and texture to be chosen by the customer.
Armrests made of beech wood, with two layers of polyurethane varnish –shade to be chosen by the customer.
The automatic tip-up mechanism rotates seat and backrest to the fold position when the seat is vacated.
Fixing to the floor is achieved by means of metallic supports finished with electrostatic epoxy powder –shade and texture to be chosen by the customer.
This model includes seat and row numbering. |
|
Upholstery on seat and backrest made with polyurethane foam on a beech plywood core, 12 mm. thick, (self-extinguishable according to legal prescriptions), covered with M-1 fireproof fabrics, zipper finishing, with an additional underlying M-1 layer –shade to be chosen by the customer.
The automatic tip-up mechanism rotates seat and backrest to the fold position when the seat is vacated.
Sidearms made of aluminium with 80-micron powder coat finishing –shade to be chosen by the customer-, fixed on a steel tubular frame and legs.
Armrests are made of semi rigid black polyurethane foam. As an option, they can also be made of solid beech wood.
Fixing to the floor is achieved by means of metallic supports finished with electrostatic epoxy powder –shade and texture to be chosen by the customer.
As an option, this model includes seat and row numbering. |
|
Seat especially designed for conference rooms, theatres and auditorium.
Seat and backrest made of beech plywood, 12mm thick for the seat and 10mm for the backrest, framed at the sides and at the top with solid beech wood. The set is upholstered with polyurethane foam covered with M-1 fireproof fabrics with an additional underlying M-1 layer.
Sidearms structure made of a steel plate, 8mm thick, with epoxy powder coat finishing.
It holds high-density veneered MDF boards. Same finishing (fabrics) as seat and backrest. It also encloses the folding socket joints, which are made of injected polyamide, very resistant to mechanical demands, and do not require maintenance.
Armrests made of solid beech wood, 10mm thick, with the same finishing (fabrics) as sidearms.
Fixing to the floor is achieved by means of two orifices placed at the bottom part of sidearms, using specific hardware. |
|
Seat especially designed for conference halls, theatres and auditorium.
Seat and backrest made of beech plywood, 12mm thick, and finished with 2 layers of polyurethane varnish. Upholstery is made of open-cell polyurethane foam (self-extinguishable according to legal prescriptions), covered with M-1 fireproof fabrics with an additional underlying M-1 layer –shade to be chosen by the customer.
Backrest is fixed to the set by means of two side components made of extruded aluminium. Thus, the row achieves uniformity and firmness.
Sidearms also enclose the folding socket joints, which allow the seat pan to fold by means of a spinning axle and a torsion spring, determining the automatic reversion.
Joints made of injected polyamide, very resistant to mechanical demands, and do not require maintenance.
Fixing to the floor is achieved by means of a steel plate support, 10mm thick, onto which the sidearm is anchored. Every support has two orifices for its fixation to the pavement. |
|
Tuxedo Seating System: Architecturally Specified Auditorium Seating
Tuxedo Seating System: Architecturally Specified Auditorium Seating |
|
| ... products without information |
| |
|
|
