|
|
6 LED elements create paths or luminous zones in the garden grass.
Materials: body lamps, diffusers and connection boxes in injection moulded thermoplastic material.
Colour: green. Light emission: diffused.
|
|
|
Beautiful merging of historical genius and contemporary expression; their pyramidal shape, carved in a pure material such as glass, makes these 3D lamps stunningly original. Carved out and milled manually by glass masters, these built-in lamps expand in three dimensions like a diamond in its caset.10x10 (LOUVRE) then 15x15 (MAYA) then 20x20 (CHEOPS)
|
|
|
Orientation lights for installation in walls and floors/ground, for example for path marking and illumination, in underground garages, entrance halls and in open spaces, as part of building control systems and also for accented decorative lighting. Various designs are available with different types of equipment, including LEDs, compact fluorescent tubes or halogen light sources. The robust models feature a stainless steel housing and a stainless steel cover in conjunction with an LED, offering durability, safety and reliability even with high levels of pedestrian traffic.
|
|
Orione
Orione allows for the creation of charming light and shade effects; the garden will be sparkling with lights from hidden sources. The Faor spotlight orients the light only vertically while the Faorc spotlight, with a raised polycarbonate shield, spreads it also sideways, and in every direction. For the latter item an accessory is available which prevents light from being projected upwards, thus spreading it only horizontally.
|
|
Recessed floor light IP 67 suitable for motor vehicles equipped with a LED of power consuming 1,2W.
Aluminum Corp and stainless flange.
|
|
|
A fitted low level light consisting of polymer concrete slab that enables the emission of light through cracks on its surface embedded with a coloured translucent material. 30 x 30 centimetres. Available in fluorescent or LED.
|
|
| ... products without information |
| |
STEPBLOC
Slip-resistant serrated surface with raised perforations.
The upwards-perforated surface with its non-slip design provides a surface which gives superior grip properties that offers the highest safety. The oval-shaped openings permit liquids to run off easily, these openings provide a 37% open area and are sized to prevent a 15mm diameter ball passing through the openings.
Webforge supplies STEPBLOC manufactured from pregalvanised mild steel and the planks are supplied in a range of different heights, widths and thicknesses with the maximum length of 5.790m.
|
|
STEPCLAIR
Slip-resistant surface with both upward and downward facing holes.
The downward-perforated holes have a diameter of 18mm, whilst the upward-perforated holes have a diameter of 4.5mm, creating a plank with a 30% open area and aperature sizes that prevent a 20mm diameter ball passing through the openings.
The interplay between the prominent and recessed openings provides a secure foothold and at the same time allows liquids to drain freely off the surface. The STEPCLAIR profile is less aggressive than the STEPBLOC profile and has the advantage of allowing wheeled trollies to be pushed across its surface.
Webforge supplies STEPCLAIR manufactured from pregalvanised mild steel and the planks are supplied in a range of different heights, widths and thicknesses with the maximum length of 5.760m.
|
|
STEPBLOC
Slip-resistant serrated surface with raised perforations.
The upwards-perforated surface with its non-slip design provides a surface which gives superior grip properties that offers the highest safety. The oval-shaped openings permit liquids to run off easily, these openings provide a 37% open area and are sized to prevent a 15mm diameter ball passing through the openings.
Webforge supplies STEPBLOC manufactured from pregalvanised mild steel and the planks are supplied in a range of different heights, widths and thicknesses with the maximum length of 5.790m.
|
|
STEPCLAIR
Slip-resistant surface with both upward and downward facing holes.
The downward-perforated holes have a diameter of 18mm, whilst the upward-perforated holes have a diameter of 4.5mm, creating a plank with a 30% open area and aperature sizes that prevent a 20mm diameter ball passing through the openings.
The interplay between the prominent and recessed openings provides a secure foothold and at the same time allows liquids to drain freely off the surface. The STEPCLAIR profile is less aggressive than the STEPBLOC profile and has the advantage of allowing wheeled trollies to be pushed across its surface.
Webforge supplies STEPCLAIR manufactured from pregalvanised mild steel and the planks are supplied in a range of different heights, widths and thicknesses with the maximum length of 5.760m.
|
|
|
|
|
|
Fibre Reinforced Plastic (FRP) Grating
Webforge Fibre Reinforced Plastic (FRP) grating is a moulded, one-piece fibreglass reinforced plastic grating, available in standard panels or fabricated into panels of the shape you require to fit your floor.
The square pattern design with interwoven construction allows load to be transferred to the adjoining bars providing a superior load-carrying capacity.
The high resin-to-glass ratio provides maximum corrosion resistance to a wide range of chemicals frequently encountered in many industries.
Webforge FRP comes in one standard panel size 1220 x 3660 mm.
Features/Benefits
Integral, one-piece construction increases load-bearing capabilities.
Load applied to a Webforge FRP bar is transferred to adjoining bearing bars, assisting in load distribution on the grating as well as on the support structure.
Smooth resin-rich vertical surfaces and tapered bars allow all debris to fall through.
Continuous glass fibre strand in alternating layers throughly wetted with the appropriate resin for excellent corrosion resistance.
Open area 70%.
|
|
| ... products without information |
| |
|
|
