|
|
Bdlove Lamp -2003-
Ross Lovegrove
Base made of Polyethylene (MDPE), of medium density, mass pigmented in different colours; fluorescent red (P-805 U 2X), beige (P-467 U), white (WARMGREY 1U), blue (P-303 U), green (P-373 U), sandstone -sand granite structured-, millstone -dark grey granite structured-, red bermellón (P-200 C), or in costumer colour (minimum 22u.)
Indoors and outdoors use with exception of the red fluorescent.
The part processing system is rotational moulding.
The piece has a seating capacity for three people.
Diffusing panel made of natural Polyethylene (MDPE), with an additive against UV rays.
Electrical equipment, it includes a Halogen High Voltage 100W 230V bulb, 30° opening, E-27 tip. 4 metres of tubing are supplied for connection to the mains supply with SCHUKO European-sized rubber plug of 10 to 16A.
Characteristics:
EUROPE 230V 50Hz
USA / JAPAN 120/125V 60Hz
IP 65
Non-slip stoppers in EPDM (rubber).
The base only can be ballasted with washed sand.
The bases can be stacked, maximum 2 bases.
Bdlove lamp: 141 x 120 x H.300cm.
|
|
|
Made in white polyethynlene. 1 low-energy consump (MAX 1x24W) E27 bulbs. Size 50x40x40 cm. In & out use.
|
|
Set to be launched in 2007, the Outdoor Living Lamp ZOE – a new product in the VITEO_Light Collection – was developed in association with Austrian lighting designer Robert Steinböck.
This outstanding reading lamp for the garden and patio combines the benefits of a powerful light source emitted using white luminescent power LEDs (‘Mono’) with the beauty of an elegant design. Here, a cylindrical lampshade made of opal acrylic glass has been mounted on top of a 185 cm high metal rod coated with structural powder. The base consists of a mounting plate which can also be screwed fast to any subsurface near the property, for example, if so desired.
ZOE is powered by environmentally friendly solar energy. In this case the lamp will provide about six - seven hours of light once fully charged (after about 11 hours of sunlight). The energy is stored in rechargeable batteries located in the lamp-shade. Since the solar lamp can be positioned just as you wish, wherever you wish, it gives you the flexibility to light up even the most obscure parts of your garden and patio: after all, you can take the lamp along with you wherever you go!
|
|
For use with MR16 lamps to 50 watts.
Tamper proof design.
Utilizes machined aluminum Nite Star%u2122.
1%u201D diameter machined aluminum staff with stainless steel hardware.
Fixture adjustable up to 90° from vertical and 360° rotatable.
ARL & CSA listed.
For use with remote transformers.
Integral transformer option available.
|
|
“A light in the form of a mushroom - the Amanita. Having said that, it is just
one more in the long line of outside lights in that style. We have, however, added a symbolically distinctive feature to the top of the shade, made up of primary geometrical shapes, which are freely scattered organicaly over the surface. The openings allow the light to pass through; this detail causes a certain degree of disruption, both in respect of the stylised impression as well as in the state of elation which the garden generates. For this reason, the Amanita is something more than a dim pinpoint of light in the middle of the garden and its vegetation. By means of the openings and the light emanating through them, the Amanita is capable of creating a symbolic aura of magic.”
|
|
ABC policy : A
lamptype : compact fluorescent
sockettype : E27
ILCOS code : FBT E27
ZVEI code : TC-TSE
number of lamps : 1
wattage (W) : 23
light diffusion : direct
input voltage : 230V
installment : surface
mounting : floor
dimensions (mm) : L300/B300/H410
weight (kg) : 15 7
class : I
application : Exterior lighting
standard : CE
protection level : IP55
F-standard : yes
safety distance : 0.5 m
|
|
|
Stone (Design by Josep Puig + Josep Novell) is an outside portable lamp with a diffuser produced in rotomoulded polyethilene and housing a T5 tube of high performance (55W). It's great dimensions (80x55cm) and organic shape makes it perfect to use in big and not so big spaces, giving a very smooth and shadow free light. It can be combined making groups of rolling stones ,,, or just standing alone in the middel of a garden. It's supplied with 4m on neoprene black cable.
|
|
Portable outdoor lamp, made of polyethylene by means of rotational moulding. It includes an electronic device.
16''Øx40''h
|
|
|
The streets of Florence, Tuscany countryside create with the "Lampade da Esterno" Emporio San Firenze, an harmonic blending of lines and materials. The objects are handled with modernity for the best protection fro atmospheric agents, maintaining the aesthetic quality of our products unchanged in time.
|
|
PUNT VERD ILLUMINACIO is a family company whose main business activities are concentrated exclusively in articles for garden lighting.
On our catalogue you will find only standard dimensions, but as manufacturers we can offer you the dimensions that your customer requires. We only use national first-quality materials, such as aluminium and stainless steel for our products. Our articles are painted with polyester paint in various colours and they are oven-baked.
The guarantee of our articles is confirmed and ensured by the reputable shops that have put their trust in the brand ALART on the national market during 15 years.
We would also like to draw your attention to the fact that our products are developed and designed by our technical office and that they are entirely manufactured in our factory. Also, before they are brought onto the market, our products are certified to the latest standards and approved by the homologation laboratory, so that we can offer you full guarantees.
|
|
PUNT VERD ILLUMINACIO is a family company whose main business activities are concentrated exclusively in articles for garden lighting.
On our catalogue you will find only standard dimensions, but as manufacturers we can offer you the dimensions that your customer requires. We only use national first-quality materials, such as aluminium and stainless steel for our products. Our articles are painted with polyester paint in various colours and they are oven-baked.
The guarantee of our articles is confirmed and ensured by the reputable shops that have put their trust in the brand ALART on the national market during 15 years.
We would also like to draw your attention to the fact that our products are developed and designed by our technical office and that they are entirely manufactured in our factory. Also, before they are brought onto the market, our products are certified to the latest standards and approved by the homologation laboratory, so that we can offer you full guarantees.
|
|
|
Spotlight to light warm, ideal white woman for garden, details from outside and fountains. Beautiful to look at itself, low consumption.
|
|
|
Lamp endowed Garden umbrella LED of feeding with photovoltaic panel or transformer in order to recharge the package batteries. Ideal x exteriors is compatible with every type of auction from garden umbrella (max 50mm). It is recharged in 6 hours and it has an autonomy of approximately 8 hours. The low voltage of the lamp, does not attract the bugs
|
|
4000-03
White lacquer
Polythene diffuser
2 x 2G11 36W Max Compact Fluorescent
4000-14
Brown
Polythene diffuser
2 x 2G11 36W Max Compact Fluorescent
|
|
- Available with T4 halogen lamps.
- Precision machined from aluminum, brass, or stainless steel with all stainless steel hardware.
- Frosted tempered glass radial lens creates a smooth, even distribution of light.
- High temperature silicon O-rings used to create a water tight fixture.
- Standard fixed stem lengths from 6" to 48", in increments of 6", covers most applications, while the adjustable stem options give infinite control of fixture height.
- Standard surface mounts, stake and junction mounts, and integral transformer mounts allow for use in virtually any installation.
Available in 14 standard colors as well as several aluminum and bronze metal finishes.
CSA tested & certified to US & Canadian safety standards for wet location landscape use.
|
|
design Mario Cucinella
Minimal design makes Iteka able to satisfy a wide array of lighting needs in parks, gardens, and avenues. The many applications, be the wall-mountings, ground, or pole-mountings with single or double light body installations, make Iteka ideal for every residential area.
|
|
iFace is a fitting that was born to light and enhance surfaces, details, and residential areas.
A ceiling-mounting system in three different sizes %u2013 small, medium, and large %u2013 and a halogen version for decorative lighting effects. Available for pole application, in two different heights with the possibility of single installation of the lighting bodies.
|
|
Contemporary design … with the familiar ALUMINCO quality!
Exterior lighting of aluminum, specially designed in modern lines, with secret lighting which reflects the light on the speculum, shedding it smoothly, creating a very impressive result!
On the lighting’s body the drilled aluminum sheet, the ultimate characteristic of the contemporary design gives its touch on this high aesthetics ALUMINCO lighting, making it a very interesting and attractive choice for every house exterior!
Garden Lighting
PLOUTON
Height: 3m
Code: 300-1F
|
|
|
The streets of Florence, Tuscany countryside create with the "Lampade da Esterno" Emporio San Firenze, an harmonic blending of lines and materials. The objects are handled with modernity for the best protection fro atmospheric agents, maintaining the aesthetic quality of our products unchanged in time.
|
|
Kit for the lighting of private park and
residential.
The already préconfigurés kits are available in
version for steel post zinc coated and painted in
gray graphite a height H = 1 m, and in
mural version for simple arm. All the versions are in double insulation; the degree of protector
IP 54 is guaranteed by the expanded silicone joint.
All the kits from now on are proposed in the new color gray graphite.
|
|
Designer Antoni Arola
Materials and finishes
Stainless sleel slem. White fibre-glass
shade.
Optional base die-cast iron graphite grey
lacquer.
|
|
|
Outdoor floor lamp. Stainless steel, aluminium and double covering diffuser produced in an especial unalterable polycarbonate. Forged black oxiron finish. Electric ballast.
|
|
Citylux
Lighting with directional optics, Citylux is appropriate for the lighting of the residential districts. Citylux lighting, planned for a fixing in signal can, on request, being provided in suspended version. Citylux exists in two models:
Citylux 450: for powers of lamp up to 125 W,
Citylux 560: for powers of lamps up to 150 W.
|
|
PUNT VERD ILLUMINACIO is a family company whose main business activities are concentrated exclusively in articles for garden lighting.
On our catalogue you will find only standard dimensions, but as manufacturers we can offer you the dimensions that your customer requires. We only use national first-quality materials, such as aluminium and stainless steel for our products. Our articles are painted with polyester paint in various colours and they are oven-baked.
The guarantee of our articles is confirmed and ensured by the reputable shops that have put their trust in the brand ALART on the national market during 15 years.
We would also like to draw your attention to the fact that our products are developed and designed by our technical office and that they are entirely manufactured in our factory. Also, before they are brought onto the market, our products are certified to the latest standards and approved by the homologation laboratory, so that we can offer you full guarantees.
|
|
- Available with LED and MR16 halogen lamps. Click link to view PA7 Lamp & Photometry info.
- Heavy walled cast bronze with all stainless steel hardware.
- Faceplate option, available in two cutoff styles for optimum glare control, incorporates a large spread lens for a wide, even distribution of light.
- Standard surface and stake mount options.
- Requires remote transformer.
Available in 14 standard colors as well as several aluminum and bronze metal finishes.
CSA tested & certified to US & Canadian safety standards for wet location landscape use.
|
|
- Available with an LED or MR16 halogen lamp. 1 Lamp info: LED, MR16.
- Heavy walled cast aluminum or bronze faceplate with all stainless steel hardware.
- Faceplate holds up to two lens accessories.
- For round junction box mount applications in non-combustible materials.
- Requires remote transformer.
Available in 14 standard colors as well as several aluminum and brass metal finishes.
CSA tested & certified to US & Canadian safety standards for wet location wall mount use.
|
|
For use with T3 halogen lamps to 20 watts.
Tamper proof design.
Power Pipe%u2122 fixed mounting option or adjustable mounting option available.
Tempered, frosted glass lens, factory sealed.
1" diameter machined aluminum cap and stem.
ARL & CSA Listed.
Machined aluminum construction with stainless steel hardware.
For use with remote transformers.
|
|
|
|
