|
|
EDEN is a famous daybed to meditate, discuss or relax on its sofa... EDEN offers a tropical yet traditional allure.
Based on the same structure as our Honeymoon bed, the EDEN bed is made of solid teak wood with a traditional thatched roof which provides unparalleled insulation from heat and noise… Available in natural fiber for European countries and synthetic fiber, or local production, for other countries.
Dimension : 251 x 176 x 322 cm
|
|
|
Permanent outdoor daybed : teak wood and thatched roof. Size : 253 x 178 cm (410 x 335 cm including roof). Delivered complete with matress, cushions, outdoor fabrics and protective cover.
|
|
THUNDERBIRD is a classic on the Mediterranean seashores. Two persons can sit high above ground level, and enjoy perfectly the panorama...
The structure is made of solid teakwood and its roof of a waterproof marine canvas which resists wind speeds exceeding 90 km/h (55 Mph). The roof can be easily removed with the stainless steel button snaps.
Cushions and mattress are covered with removable slipcovers made of Sunbrella fabric. A mosquito net and a protective cover are provided.
Size : 215 x 215 x 305 cm
|
|
|
Outdoor teak wood daybed with tropical design. Size : 250 x 170 cm. Delivered complete with matress, cushions, outdoor fabrics, curtains and protective cover.
|
|
|
Permanent outdoor daybed : teak wood and canvas roof. Size : 251 x 176 cm (401 x 326 cm including roof). Delivered complete with matress, cushions, outdoor fabrics and protective cover.
|
|
|
Permanent outdoor daybed : stainless steel, teak wood and canvas roof. Size : 265 x 195 cm (365 x 295 cm including roof). Delivered complete with matress, cushions, outdoor fabrics, curtains and protective cover.
|
|
|
Permanent outdoor daybed : teak wood and thatched roof. Size : 222 x 222 cm (380 x 380 cm including roof). Delivered complete with matress, cushions, outdoor fabrics and protective cover.
|
|
Lima : SPAbed including an inbuilt shelf
204cm x 200cm x 208cm or W/D/H
204cm x 120cm x 208cm
(Ottoman 204cm x 80cm x 48cm)
Weather resistant frame, varnished aluminium, stainless steel fixtures, All weather-wicker available in 7 natural colours produced by the specialized manufacturer Viro – It is UV resistant, does not fade, crack or split over time, is easy to clean with soap and water and is 100% recyclable. The Weather resistant upholstery is made from Sunbrella and QuickDryFoam respectively– all curtains can be removed easily (washable)
Optional: Boxmark Xtreme leather for any outdoor use (40 colours available).
Design & Manufacturing: Merane GmbH - Germany //
Info: www.merane.de
|
|
Made of anonized aluminium. Polyuretane foam rubber. Removable upholstery. See available yacht fabric colours.
80''x48''x80''h
|
|
Made of anodized aluminium. Yacht fabric cover completely removable. Polyurethane foam rubber.
40''x80''x10''h
55''x80''x10''h
80''x80''x10''h
|
|
Relax to the rhythm of summer
Gently sway to the motion of a carefree summer’s day; pleasantly alone or in agreeable company, the new Swing Bed provides the perfect setting.
A handsome eye-catcher in the garden, it merges harmoniously into its surroundings. The canopy of pale canvas, drawn tight, loosely draped or moved aside entirely, regulates the incident sunlight. The screens to the back and sides can be variably height-adjusted.
The fine synthetic weave in natural-coloured or bronze hues, and satin-finished stainless steel, are the high-quality materials that make the Swing Bed completely weatherproof. When necessary, a cover of transparent, synthetic material protects upholstery and cushions from dirt and damp.
|
|
| ... products without information |
| |
|
Medium upholstered bed with additional bed
|
|
|
With its special base, Centodue can provide twin beds or a double bed version. The removable cover can be chosen from a wide range of fabrics, matching with duvet covers, rollcushions , pillowcases and sheets.
|
|
STUDIO JOVEN is a breath of freedom, imagination and personalisation for youth bedrooms. There are multiple options for work, rest and play in this programme, thanks to the versatility of its elements: desks with complete freedom of form, shelving with highly flexible arrangements, containers with original designs, new aluminium elements, such as drawer pulls and legs… All resistant and durable enough for youngsters…
A splendid combination of solid beech with a \"Laguna\" lacquer. Notice the original Carré design of the upper bed (75 cm high) that incorporates drawers and a pullout bed, both with aluminium pulls.
|
|
|
Lur bedroom suite in beech.
|
|
Start
Finishes: Light Oak, Dark Oak
|
|
| ... products without information |
| |
|
|
|
|
Depending on the version, the multiLine_2 hve is adjusted by means of 1, 2 or 3 electric motors with silent running adjustment drives. In the electric versions (max. 3 electric motors), the cable remote control with magnetic safety key controls the functions "height adjustment", "synchronous tilt", "back rest" and "leg rest". Tilting of the complete upper section, e.g. for the relax position or to lower the head position, is carried out steplessly by means of release levers mounted on both sides underneath the seat cushions. As well as the fully electric version, the modular design of the multiLine_2 provides the option of model variants with electric height adjustment and manual adjustment of the upper section, likewise synchronously or separately. The height adjustment range is 53 to 87 cm referred to the seat or lounger height.
Patient transfer - e.g. from the entrance of the operating theatre to the lounger or from lounger to bed - is very much simplified by the adjustable height, and goes easy on both the personnel and the patient. Of course it is possible to fold up the armrests – the lounger becomes completely accessible in the sitting position.
If the backrest is in horizontal position the arm rests can be lowered down to the sides of the seat cushion. The lounger can be fitted with a battery (see accessories) so that it can be moved from time to time independently of the mains supply.
|
|
|
Völker 2080 FS healthcare beds with full-length side rails in squared profile design. The fashionable model offers a homelike flair.
|
|
|
Völker 3080 MB healthcare beds with two-part adjustable assist rails in solid wood design. The fashionable model offers a very homelike flair.
|
|
|
Völker 3080 K healthcare beds with two-part adjustable assist rails in aluminum design. The model for clinical demands offers a pleasant flair for long-term nursing care.
|
|
|
Völker 3080 C healthcare beds with two-part adjustable assist rails in round profile design. The classic model with round knob offers a very homelike flair
|
|
|
|
|
|
The S 280 und S 380 healthcare beds are an ideal combination of Völker healthcare beds (superstructure) with the undercarriage of Völker hospital beds. While these Völker beds convey a homelike feeling, the undercarriage satisfies all the demands placed upon high-performance hospital beds: efficient, effortless maneuverability over longer distances and ready-to-go mobility in every position.
Völker sub-acute care beds are equipped with a four-caster central braking system. The casters can be locked for extreme stability or released for transport via a foot-operated brake bar. Straight-ahead tracking (locking a head-end or foot-end caster lengthwise) is also set via the brake bar. All-metal casters with a diameter of 125 mm and enclosed permanently lubricated bearings contribute to its excellent maneuverability. Trendelenburg and reverse-Trendelenburg positioning can be selected via the caregiver control console (optional). Völker S 280 healthcare beds come with full-length side rails, Völker S 380 healthcare beds come with split two-part assist rails.
|
|
|
|