|
|
Catalyc range - Confort
-Thermostat
-Electronic ignition
-Colour frosted black
|
|
Infrared range - Junior chrome
- chrome finish
- Piezo ignition
- Colour frosted black
|
|
Infrared range - junior foldable
- foldable 22 cm
- 1 setting
- Piezo ignition
- Colour metallic grey with frosted black facade
|
|
Infrared range - classic
- 2 settings
- piezo ignition
- Colour silver-grey
|
|
Infrablue - Junior
- 2 settings
- Piezo ignition
- Colour Chinese blue
|
|
| ... products without information |
| |
|
Medium and high output ACV boilers are the ideal complement to ACV water heaters for tertiary applications that require high heating output.
|
|
|
Space-saving and efficient: The new Weishaupt Thermo Condens Kompakt condensing unit has an integral 115 l hot water cylinder. With this tank, the innovative unit provides the hot water convenience of a conventional 200-l unit. Whether in the cellar or in the house - the graceful combination can be installed anywhere, as the simple, elegant design fits perfectly into any environment.
|
|
|
ACV gas-fired boilers offer a simple and ecological solution for heating only and allow for optional addition of a domestic water heater.
|
|
|
ACV’s new wall-hung condensing boilers are designed for more efficient use of natural resources by recovering the thermal energy of combustion gas vapour. ACV condensing boilers are fitted with a stainless steel core that guarantees unparalleled corrosion resistance. Their outstanding efficiency and their quiet, reliable operation are an unbeatable combination.
|
|
|
|
|
|
The solution for affordable and convenient heat
With the Vitopend 200-W, Viessmann offers a wall mounted gas fired boiler with a particularly advantageous price/performance ratio, excellent heating and operating convenience, compact dimensions and a timeless, elegant design.
Price and performance in perfect harmony
The Vitopend 200-W is one of the most affordable in its class, not only in the purchase price, but also where running costs are concerned. After all, it can achieve a high standard efficiency of up to 85 % (Hs) / 94 % (Hi).
Economic and environmentally friendly
The premix burner of the wall mounted gas fired Vitopend 200-W boiler is particularly economical because it adapts its modulating burner operation to the actual heat demand. Automatic flue gas adaptation ensures that combustion meets the actual conditions, for example when there is a change in weather conditions. Not only is it easy on the pocket, but it is also environmentally friendly. Consequently, the Vitopend 200-W emissions are below the requirements for the "Blue Angel" certificate of environmentally excellence.
Always space efficient
The compact Vitopend 200-W fits practically anywhere, in the kitchen, the bathroom, the attic, in recesses and corners - because clearances to the side for service work are not required. The Vitopend 200-W can be quickly fitted by your heating contractor and is operational in no time, be it in a new building or replacing an old boiler.
|
|
PRESTIGE Tradition 50 kW Low Temperature
Heating only or with hot water tank UPEC Sol
Prestige's heat exchanger is entirely in copper, so it is fundamentally different from boilers ground iron (copper is almost 10 times more driver than the melting and his weight 2 to 3 times less)
Prestige Tradition enjoys an very flexibility working without inertia.
Product advantages:
-- its electronic board allows it, by simple addition, moving from manual control to the total driving with the mechanism for regulating radio écoradiosystem. Connecting a thermostat can also be wired.
-- His 3-way valve can connect a hot water tank or CESI.
|
|
HYDROMOTRIX Condensation 14/20 commutable
The condensation optimized up to 109% of output
The exclusive technical solutions whose HYDRO Condensation is equipped, optimize energy saving throughout the year, and guarantee stable and durable performances.
|
|
| ... products without information |
| |
Ensures assembly convenience with its compact dimensions.
Works safely and efficiently by waste gas pipe system connected to outer surrounding. It is an ideal solution for places without a chimney.
Water outlet temperature, flame modulation indicator and failure codes can be monitored on the LCD screen.
Ignition is automatically realized and the burner becomes active if hot water tap is opened while electronic ignition system and instant heater are at open position.
Supplies a thermal power of 350 kcal / minute.
Enables to obtain hot water at a flow rate between 2,7 and 14 l/minute.
Can continue to operate up to a minimum water pressure of 1 m water column.
Has an advanced failure-warning system.
Ensures easy operation with its ergonomic design.
Has long life by means of electrostatic powder paint.
Can be used LPG and Natural Gas Fuels.
|
|
| ... products without information |
| |
|
|
|
|
Faro
the indoor fire place with vertical flame
Enjoy the heat and the beauty of the flame!
Wall or center installation, the Faro heater is an independent gas-fired heating device. It uses an atmospheric burner with a TYPE C, water-tight, combustion chamber that is completely isolated from the environment where it is installed.
This device guarantees maximum safety, because there are no smoke or gas emissions inside the environment where the appliance is installed.
This device are produced to run on METHANE GAS, but can be converted to GPL (G30/G31), by using the appropriate nozzle KIT provided with the appliance.
On request this model can be provided as GPL. The heat exchanger, is made in die cast and finned aluminium, allowing for elevated combustion. An electronic chip controls all the principal functions of the device and automatically cuts off the gas supply in the event of a malfunction. The control panel has an incorporated socket allowing for connection to the mains supply, can be manually or automatically switched on or off, timer programming functions, thermal and speed power ventilator controls, room temperature regulation and re-set option after a malfunction.
|
|
|
|
|
|
Wall or corner installation, Fiammella heaters, are independent gas-fired heating devices. They use an atmospheric burner with a TYPE C, water-tight, combustion chamber that is completely isolated from the environment where they are installed.
These devices guarantee maximum safety, because there are no smoke or gas emissions inside the environment where the appliance is installed. These devices are produced to run on METHANE GAS, but can be converted to GPL (G30/G31), by using the appropriate nozzle KIT provided with the appliance.
Note: On request these models can be provided as GPL. The heat exchanger, is made in die cast and finned aluminum, allowing for elevated combustion. An electronic chip controls all the principal functions of the device and automatically cuts off the gas supply in the event of a malfunction. The control panel has an incorporated socket allowing for connection to the mains supply, can be manually or automatically switched on or off, timer programming functions, thermal and speed power ventilator controls, room temperature regulation and re-set option after a malfunction.
|
|
|
|
|
|
Faro
the indoor fire place with vertical flame
Enjoy the heat and the beauty of the flame!
Wall or center installation, the Faro heater is an independent gas-fired heating device. It uses an atmospheric burner with a TYPE C, water-tight, combustion chamber that is completely isolated from the environment where it is installed.
This device guarantees maximum safety, because there are no smoke or gas emissions inside the environment where the appliance is installed.
This device are produced to run on METHANE GAS, but can be converted to GPL (G30/G31), by using the appropriate nozzle KIT provided with the appliance.
On request this model can be provided as GPL. The heat exchanger, is made in die cast and finned aluminium, allowing for elevated combustion. An electronic chip controls all the principal functions of the device and automatically cuts off the gas supply in the event of a malfunction. The control panel has an incorporated socket allowing for connection to the mains supply, can be manually or automatically switched on or off, timer programming functions, thermal and speed power ventilator controls, room temperature regulation and re-set option after a malfunction.
|
|
|
|
|
|
Wall or corner installation, Fiammella heaters, are independent gas-fired heating devices. They use an atmospheric burner with a TYPE C, water-tight, combustion chamber that is completely isolated from the environment where they are installed.
These devices guarantee maximum safety, because there are no smoke or gas emissions inside the environment where the appliance is installed. These devices are produced to run on METHANE GAS, but can be converted to GPL (G30/G31), by using the appropriate nozzle KIT provided with the appliance.
Note: On request these models can be provided as GPL. The heat exchanger, is made in die cast and finned aluminum, allowing for elevated combustion. An electronic chip controls all the principal functions of the device and automatically cuts off the gas supply in the event of a malfunction. The control panel has an incorporated socket allowing for connection to the mains supply, can be manually or automatically switched on or off, timer programming functions, thermal and speed power ventilator controls, room temperature regulation and re-set option after a malfunction.
|
|
AIRCALO is the french company leader in production of gas heaters.
These equipment may be connected either with vertical or horizontal vent or through a chimney.
These aerotherms do meet the main requirements of the CE standards requirement related to gas-fired aerotherm.
CAUTION :
These equipment can only be used in sufficiently aerated premises, except where a tight connection is provided.
The proper operation of the aerotherm depends on a correct installation and start-up.
Aerotherm should not be installed in :
- Hazardous areas
- Premises containing vapours of chlorinated combination
- Areas with high contents of inflammable dusts
- Highly humid rooms.
|
|
|
Bi-energy reversible monosplit system for industrial or commercial buildings : Internal unit is double skin 25 mm thickness including stainless steel exchanger with gas fired burner 35 kW for heating and R410A coil working with an external unit air/air 17 kW for cooling. 2 speeds fan for direct blowing or ducted applications. The unit is supplied complete with fume kit and regulation box. (Automatic change over gas heating / electrical cooling).
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
