|
|
One shutter door, type ASCO, in dimensions of H (height) x A (total width) mm, hot-dip galvanized or galvanized and painted, consisting of:
· Two columns
· One panel made of grating (all types of ASCO gratings) on a frame of rectangular tubes
· Lock or electrical mechanism on demand
|
|
The gate automated Porteo Monceau is a beating gate made up of two casements and two intelligent columns. The connection of the casements is carried out by actuator FAAC 750 bellow, and by a bearing with simple line of balls in top. The unit is made out of sheet and steel galvanized and painted by thermo lacquering out of powder for the structure, and the casements are sanded metallized and painted by thermo lacquering out of powder.
The intelligent columns shelter the various elements necessary for the automation of the gate and the respect of the safety requirements:
- A standard management board FAAC 462
- A set of integrated cells ordered in closing
- A twinkling lamp
- A lamp of lighting of zone
- A jack of the type FAAC 750
- A "gatecoder" with the adaptation kit for engine 750
The access to the various elements of automation is done by the door located on the interior frontage of each intelligent column. This steel door is assembled on hinges and is locked using a ¼ of key turn.
Automation is equipped with a anti-crashing security located on the section of the first casement, of a turntable power station to be sealed containing and the blocking stopping device of the gate actuated at the time of its movement by engine FAAC 750, as well as ordering of manual releasing in the event of interruption of current or breakdown of the system, exclusively accessible to the only authorized people.
The retractable system of thrust allows, once the opened gate, not to present an asperity more being able to obstruct the passage of the vehicles.
|
|
The gate automated Porteo Similaire is a beating gate made up of two casements and an electronic enclosure. The connection of the casements is carried out by a conical roller bearing low, and by a bearing with simple line of balls in top. The unit is made out of sheet and steel galvanized and painted by thermo lacquering out of powder for the structure, and the casements are sanded metallized and painted by thermo lacquering out of powder.
The enclosure shelters the various elements necessary for the automation of the gate and the respect of the safety requirements: a standard management board FAAC 462 manager two sets of cells, a twinkling lamp, a lamp of lighting of zone. Each ventail is actuated by a jack FAAC 400 associated with its "gatecoder".
Automation is equipped with a anti-crashing security located on the beaten section of the ventail including/understanding, of a turntable to be sealed containing and the blocking stopping device of the gate (electromechanical lock).
|
|
| ... products without information |
| |
... see all the products in the category
Gates
|
A robust, elegant, secure intensive-use door. Simple action traditional. Swing door for intensive use - 63 mm module
Elegant and aesthetic
• Lightweight aspect due to the elliptic shape of the sash frame profiles and the slim-line fixed frame.
• Completely concealed mechanisms (articulations, door-closure)
|
|
Theatre is a new, original system of doors. In Theatre, the structure of the door, crafted thanks to Lualdi's sophisticated ability in the use of wood, is entirely covered in leather. The final result is a warm and refined elegance, highlighted by smooth lines.
|
|
Overview
-The Marvin Commercial Door combines warm wood interiors, exceptional
performance and heavy duty proportions.
-It's available as a wood or clad-wood door, featuring extruded aluminum
cladding and a finish that exceeds AAMA 205-02 requirements.
-Commercial Door options include a closer, several locking system options,
Von Duprin Panic Rim (crash bar), kick plate, raised and flat panel options
and several sill options.
-A steel frame with a removable mullion is also available for the
Commercial Door. The frame comes primed and not painted.
Standard Features
-4 ½" x 4 ½" (114mm x 114mm) square corner ball bearing hinges
-No lock / no bore
-Factory-applied low-profile sill and panel sweep
-Insulating glass
-Beveled meeting stiles
-Wood or clad/wood panel and frame
-6" (152mm) wood stiles and top rail
-11 3/8" (289mm) bottom rail
-1 3/4" or 2 1/4" (44mm or 57mm) thick panel
|
|
A universal frame sleeping for an implementation by welding,
sealing or screwing.
Casements 58 mm thickness full for a resistance to
shocks increased.
Two anti-dégondage pawns per casement for an effective complement
against the wrenching of the casement.
A broad range of equipment allowing the basic doors to be
DAS emergency exit according to the standard NFS 61.937 or doors of reserve
reinforced against the intrusion.w
|
|
CARRY HEAVY
The aluminum range shaped SERIES 16 is conceived for the manufacture of door simple action, to and from or folding.
Carry to striking:
- of 1 or 2 casements with hinge plates out of bracket with site reserved for the head of the lock and the trowel.
- Gone up on firm door or brake of ground with off-set arm. Alternative with beaten central or without priority casement for the two casements, is with anti-grip fingers exchange and/or on the side hinge plate (safety in the public places, schools, cribs...).
PRODUCED CONCEPT:
- Heavy simple action, to and from or folding Door, to 10 casements.
Thickness of the profiles of 2 mm and overall of 46 Misters.
|
|
| ... products without information |
| |
Glazing
Slim security/safety glazing cut-out with glazing frame in anodised aluminium, natural finish (EV 1).
Glazing bars opposite hinge side as standard, on hinged
side on request.
Optional extras
Rain canopy Aluminium suitable for painting,
slot-on type
Weather bar Only on single-leaf MZ door
Glazing Glazing size 230 mm x 1360 mm
7 mm single wired glass or 20 mm
insulating wired glass
Ventilation Plastic ventilation grille 455 x 90 mm
Aluminium ventilation grille 425 x 75 mm
(fitted in the bottom section)
Additional frame 3-sided, for screw fixing, 1.5 mm thick,
galvanised, wall thickness 110 - 450 mm
Block frame 3-sided, with EPDM seal
Light grey (based on RAL 7035)
Frame For finished floor
Lock Anti-panic lock for profile cylinder, left/right,
with lever/knob or lever/lever
Profile cylinder 31.5 + 31.5 mm with 3 keys
Lever handle set Round-lever handle set with short escutcheons
or roses: with lever handle on both sides,
as lever/knob or anti-panic sets,
in plastic, aluminium or stainless steel Bar handle Anti-panic bar handle
|
|
| ... products without information |
| |
With Hörmann internal doors you can confidently carry out your building plans
Whether you are building a new property or
renovating an old one, Hörmann can supply all the doors you need for the different building areas - all from one source and in a choice of steel, steel/timber and aluminium.
|
|
|
|
see the results for the following category
