|
|
PYRAN® fire-resistant glass - The original, made of borosilicate.
Borosilicate glass is the basis material for the entire PYRAN® fire restistant glazing product family. PYRAN® fulfils the requirements of fire resistance category E, thus providing a barrier against fire, hot gases and smoke.
PYRAN® S is the product with the highest multi-functionality in SCHOTT's fire resistant glazing product range. The glass fulfils the requirements for a single-pane safety glass and, at the same time, is suitable for all applications up to fire resistance category E 120 in a thickness range of 5 to 12 mm with maximum dimensions of 1,800 x 3,600 mm* (for thicknesses 8 to 12 mm.
The interaction of innovative system solutions and creative freedom to design realises the full potential of PYRAN®S.
|
|
SCHOTT PYRANOVA® - Special glass for integrity and insulation fire resistant glazing.
PYRANOVA® fire-resistant glass is a clear, laminated composite glass, consisting of at least two float glass panes. A transparent fire resistant layer, which foams in the case of fire, is incorporated between the panes. PYRANOVA®, applied in fire resistant glazing, avoids the passage of fire, smoke and heat radiation.
PYRANOVA® meets the safety and insulated fire resistant requirements of many applications, in double glazed or butt jointed systems.
The PYRANOVA® Planline system provides fire protection with an appealing look in which the glazing fits flush to the frame construction.
|
|
|
SuperLite I is the first wireless, monolithic, safety and fire-rated glazing manufactured in the USA, offering excellent clarity with colorless and distortion-free optics. SuperLite I was developed and priced to replace existing traditional wired glass installations, now recognized by international code bodies as unsafe. SuperLite I remains the choice for use in construction where high impact safety and 20 minute fire ratings are required.
|
|
|
SuperLite I-XL is a patented breakthrough, monolithic technology that reduces the transfer of radiant heat by reflecting heat back towards the fire source. It minimizes the threat of scorching heat which can limit the safe egress of occupants and can cause the fire to spread to adjacent areas. SuperLite I-XL 45/60, the first and only product of its kind to be introduced in the USA, was developed by SAFTI FIRST in 1993 and has been installed in locations throughout the USA Authorities having jurisdiction (AHJs) across the country have approved this non-hose stream tested product because of its ability to reflect radiant heat and stay in the opening for over one hour, allowing for safe egress of occupants. Most AHJs recognize that the hose stream test was designed for structural building integrity and not as a thermal stress test for fire-rated glazing. Sprinkler activation does not compromise the performance of SuperLite I-XL.
|
|
|
SuperLite II-XL 45 is a fire resistive, technically advanced glazing product that blocks radiant heat transfer to meet ASTM E119 requirements. SAFTI FIRST was the first to provide this new technology to the USA in 1982. SuperLite II-XL products have been tested to the stringent wall standard and therefore are considered a “transparent wall.” Fire resistive glazing allows for greater design flexibility while other fire protective glazing products, such as ceramics, are limited by code to interior applications of 45 minutes or less and to 25% of the wall area.
|
|
SuperLite I-XL patented technology now affords fire-rated products to have energy performance similar to all insulated units. SuperLite I-XL IGU provides the highest energy efficiency available in fire protective products as well as radiant heat protection which is not provided by most 45 or 60 minute fire protective exterior products.
The technology of SuperLite I-XL IGU as compared to ceramics blocks up to 90% of the dangerous radiant heat generated by a nearby fire. This added protection stops the fire from jumping to adjacent properties while maintaining its integrity. The superior clarity of SuperLite I-XL IGU, when compared to ceramics amber tint & ‘orange peel’ effect, provides optimal vision. While SuperLite I-XL IGU provides additional benefits and greater clarity than ceramics, it is less than half the price.
|
|
- The only environmentally-friendly fire rated glass ceramic free of toxins and hazardous heavy metals.
- Offers unbeatable optical clarity free of tints and noticeable distortion without the added cost of surface polishing.
- Fire rated up to 90 minutes with hose stream.
- Readily available through our factory direct Quik-Ship program and our nationwide distributor network.
- Insulated, obscure and other custom make-ups available.
|
|
Fire-resistant and retardant glasses are laminated glasses consisting of Planibel float glass assembled with one or more intumescent interlayers.
In the event of fire, these layers expand, forming a protective screen.
Product range:
Pyrobel
Pyrobelite
Pyrostar
|
|
Welcome - Safety with creativity.
PYRAN® and PYRANOVA® fire-resistant glass for maximum safety and freedom of design.
With its extensive portfolio of products and services, supported by strong branding, SCHOTT is globally recognised as being synonymous with top quality and creativity.
The fire resistant glazing PYRAN® and PYRANOVA® manufactured by the company's subsidiary SCHOTT Technical Glass Solutiuons GmbH provides virtually unrestricted application options, both for internal and external surfaces. The basis for this wide scope of use is provided by successfully passed standard tests and approval processes for fi re resistant glazing to national and international standards.
|
|
|
Texglass Feu is a laminated glass of protector against fire profiting from a technology fire of point associated with the transformation Texglass image. Transparency, translucent or opaque, partial according to your needs, Texglass fire exploits the note of the design by respecting its fundamental functions: flame guard or firebreak, according to the degree of protector required for the protector of the people. Texglass fire fulfills the lawful requirements (official report), for applications in interior, or outside. Thickness of 11mm with 52mm.
|
|
... see all the products in the category
Glazing
|
Completely reversible, realized in galvanized steel sheet Sendzimir. Clapper in sheet pressopiegato to vertical ribbings and reinforced thickness 5/10 cross-sectionally from three profiles to Omega. It reinforces inner for the support of the hinges. Equipped with aeration slits up and low. Commant reversible lock with scrocco from key to sending. On every anta two endowed hinges in hinge steel are mounted antisfilamento. Perimetrale chassis outlined thickness 12/10 in to `endowed Z' of six zanche of anchorage. Removable inferior threshold. Supplied with handles and plates realized in nylon opaque black color and cylinder yale type with three keys. Paint job to epoxy powders in inks RAL.
|
|
FIRE RESISTANT RATED 120 MIN DOOR
Door assembled ready for the installation, not reversible, supplied to order of left SX or right DX hand
composed of:Door leaf made of double galvanized steel-sheet thickness 0.8 mm each with projection to overlap the frame of 25 mm on the 2 vertical sides and on top side, high density core of mineral wool layers alternated to special fire resisting compound, total thickness of leaf 60 mmAngular frame on 3 sides made of galvanized steel-sheet profile 1.5 mm thick, with clamps to bend open for the installation by mortar and with holes for the eventual installation with expansion screws. Lower jambs-distancer to remove after the installation
Lock with cyli nder hole
Safety bolts in leaf edge on opposite side of lock and strike boxes of poliammide inserted in the frame.
|
|
|
|
|
|
The SKYDAS STANDART 1LSF is the basic and simplest model of the SKYDAS doors. It is a reinforced door with excellent noise and thermal insulation. A security doors SKYDAS STANDART 1LSF can be customized, and is also available as a single or double, and fireproof (EI 30/ EI 45). After selecting a finish with UMIDAX-HLS board and a galvanised sheet structure, a door can be perfectly used as an external entrance door.
Product description:
- Door frame - 2 mm steel bended rectangular profile.
- Door leaf - specially bended steel construction.
- Hinge with supporting beds, covered with chrome-plated finishing caps - 2 items.
- Cut protective roll pins for door hinges (Ø16 mm) - 2 items.
- Insulation seals - 2 items.
- Eye hole.
- Outside and inside door finishing - optional.
- Outside and inside architraves - optional.
- Locks - optional.
Product specification:
Rating of sound insulation - 41 dB Rw (C; Ctr)
Rating of thermal transmittance - 1,3 W/(m²*K)
Resistance to repeated opening and closing - 200 000 cycle
Identification of resistance to wind load - Class C5
Measurements of air permeability - Class 4
Identification of water tightness - Class 6A
Identification of mechanical strenght and rigidity - Class 4
Identification of fire resistance - EI30/EI45
|
|
FAHRENHEIT 30 is a security doors fit to resist fire exposure for over 30 minutes
• Double zinc plated steel sheet
• Inside insulated by fire-retardant material
• Fire-retardant seal assuring resistance to the
flame
TESIO triple security lock
|
|
The Special-Lite® SL-22 Fire-Rated AMP-Clad Door is the perfect complement to our SL-19 AMP entrance doors for interior or exterior applications that require a fire-rated door.
Tested in accordance with UBC 7-2, NFPA 252, and UL 10C requirements, the SL-22 has passed the 1-1/2 hour positive pressure test, hose stream test, and 250 °F (121 °C) temperature rise tests to achieve Warnock Hersey listing for fire-rating applications in the United States. The SL-22 is available with 30, 45, 60 or 90-minute fire-ratings.
|
|
| ... products without information |
| |
FIRE RESISTANCE
The software for the thermal analysis and the verification of resistance to the fire concurs to carry out the thermal analysis and the verification of resistance to the fire in the respect more prescrittivi codes. The thermal analysis happens to ended elements of composed sections from any material, under the action of the fire. To they of the thermal analysis goes, for sections in c.a and c.a.p., she is proceeded to the verification of the carrying ability.
|
|
Program to the ended elements dedicated to the analysis of the behavior to the fire of composed sections from materials any.
Verification of sections in reinforced concrete and precompresso reinforced concrete in conditions of thermal stress
|
|
| ... products without information |
| |
Aluminium frame partition: uprights, transoms and lower U-tracks with
thermal bridge and lacquered alumuminium cover-trims.
Vinyl coated plasterboards
DIMENSION:
Tickness : 104 mm
Width : 1200 mm
Height up to 3000 mm
|
|
|
The legal requirements for fire protection must be considered in the interior design. With its many standard systems, Schüco offers a versatile range of products for windows, doors and glazing.
|
|
|
Fire Evolution is the flushed glazed version of the "Fire" system. The glass is bonded to the aluminium profile by a self-adhesive tape to enhance clearness and transparency of the glass. The partition features the easy installation, flexibility, modularity, cabling, acoustic performances, and accessories typical of the Fire system.
|
|
|
Fire is a system of partition wall, cladding and equipped walls with a high level of flexibility and performance that allows a complete integration between its own components and other architectonic and interior elements. The partition can be composed by transparent and/or solid modules, transparent or solid doors, cable trunks, shelves, venetian blinds and other accessories.
|
|
|
THICKSET® block provides a 90-minute fire rating. The Endura™ pattern's narrow flute provides moderate light transmission/maximum privacy.
|
|
- Ultimate glass block solution
- Three solid inches of glass which resists bullets, fire, noise, graffiti and force able entry
- Classified by UL® for use as a 45- or 60- minute-rated window assemblies
- Two available patterns: clear for good visibility or stripped for added privacy
- Thicker-face = 3.0"
- Sound Transmission Class (S.T.C) = 53
|
|
|
THICKSET 60 block provides 60-minute fire rating. The DECORA® pattern provides maximum light transmission with subtle visual distortion. The nondirectional faces make installation quick.
|
|
|
|
see the results for the following category : 
