|
|
The air naturally stores all the year of the calories thanks to the solar radiation, the rain, the wind. This element constitutes a source of inexhaustible, nonpolluting and especially free energy thus that it is from now on possible to exploit thanks to thermodynamic heating also called aerothermic heating.
The range of the air/water heat pumps in changing of boiler RCH Airwell thus makes it possible to transfer the calories present in nature inside the habitat: energy saving, comfort and respect of the environment are the key words of this technology.
Advantages
Cast solid system with integrated hydraulic kit.
Conform to the Promotélec/Vivrélec recommendations.
System delivered %u201DPrêt to fonctionner%u201D.
Hydraulic kit of connection.
Kit of regulation.
Protector antifreeze.
Scroll compressor.
Controller of phases.
Limiter d%u2019intensity with starting for models single-phase currents.
Installation on circuit of existing radiator.
Coaxial exchanger.
Circulating pump.
Vase d%u2019expansion 5 L.
System of filtration d%u2019eau.
Disconnecting switch of security.
Electronic regulation aves law d%u2019e
|
|
Kolant air to water heat pump is a new generation heat pump product developed with the advanced heating technologies. The heat pump utilizes the energy from surrounding air and converts the energy to the hot water for house heating and domestic hot water supplying. The whole range of this heat pump is completed and strictly tested with our European partners, to make sure the best efficiency and quality to European market, especially for cold areas. With wide running temperature range from -15C to 40C, keep supplying the warm water from 35C to 60C(max), making you a warm and comfortable life.
All main components from our world-known manufacturing partners such as Copeland, Simence, Danfoss, Wilo. All products offer maximum efficiency together with total reliability and are manufactured to the highest quality standard.
Outstand performance
High efficiency and energy saving
R417A / R407C refrigerant
Keep running at -15C
Maximum outlet water temperature up to 60C
Stepless fan motor speed control
Expansion valve keeps the most suitable refrigerant flow in any case.
Water flow protection, high/low pressure protection, outlet temp protection etc, keeping the system safety.
High Quality and reliability
Stainless steel plane heat exchanger with maximum permitted pressure 40 bar
100% stainless water circuit
Microprocessor control and error alarm and display
Electric protection class IP54
Compact design, easy installation and maintenance
World-known brand compressor, pump and main components
|
|
Perfect for low energy houses, the Vitocal 300 can provide the entire heating demand, even on cold days. Benefits include high operational reliability and very quiet operation.
This range has a high performance factor: COP to 4.61 for brine and 5.6 for water. The standard control is a weather compensated digital heating circuit unit, with integral cooling function, menu guided operation and integrated diagnostic system. Single stage available from 6kW to 12kW. Two stage from 12kW to 107kW. A Vitocal 300 BWC version is available factory fitted, with integrated brine pump, heating circuit pump, electrical auxiliary heater, safety assembly, with safety valve, pressure gauge and air vent valve.
|
|
Weishaupt air/water heat pumps use free, everyday air as a an energy source and are highly efficient and powerful. Weishaupt air/water heat pumps are available for heating capacities of 6.6 to 22.3 kW.
Outstanding energy yield: The air/water heat pump works efficiently even with an outside temperature of -25° Celsius. Every Weishaupt heat pump is equipped with a high capacity heat exchanger.
Install anywhere: If there is not enough space indoors, the air/water heat pump can be installed outside. Its quiet operation means it can be installed as close as 5m from the next building.
Extremely quiet: Triple anti-vibration mounts, the fully sound insulated internal housing, the specially formed ventilators and the high capacity scroll compressors without mechanically actuated valves all ensure extremely quiet operation.
Also for cooling: By reversing the operating principle the Weishaupt air/water heat pump can also, with the appropriate accessories, be used for cooling buildings.
Longevity: Specially chosen materials, polished technology and robust construction all ensure reliability for years to come.
Forward looking investment: Modern technology enables high efficiencies and therefore lower operating costs. The availability of air as an energy source is unlimited.
|
|
50RHC006-060 and 50RVC009-060 units cover Standard (60° to 95° F) range commercial waterloop (boiler/tower) new and replacement type applications.
All Commercial water-to-air Water Source Heat Pumps are packaged water-to-air units, which are factory wired, piped, charged with refrigerant R-22, tested, and ready for installation.
|
|
LCW Package water cooled chillers and heat pumps
LCW water chillers and heat pumps are designed for indoor installation in both residential and industrial applications with 24 h/day operation. They are developed in a completely careened execution for an absolute noisless of the assembly.
The innovative design philosophy drawn to the creation of a unit with very reduced height (1,5 m for all the range) and water connection to the top of the unit, where together with an already preassembled internal piping means a reduction of installation costs and of technical space. All the sites are provided with refrigerant circuit and, starting from site 180, the units are provided with 4 compressors in tandem configuration with a very flexibility in the capacity modulation, reduced in rush currents and higher at the part loaded operation.
Only heat exchangers with stainless steel braze-welded plates are used. Starting from model 105, all units have "cross flow" type dual circuit exchangers on the refrigerant side and a single circuit exchanger on the water side.
All the units have a single plumbing connection to the outside, whether they are equipped with a dual heat exchanger (up to model LCW090) or a single dual circuit heat exchanger on the refrigerant side. A water flow control device is included as a standard feature. In addition to said device, the units are fitted with an outlet water temperature sensor performing the function of an antifreeze thermostat.
Only scroll-type compressors are used in the LCW units, both in single and tandem configurations.
Painted galvanised sheet steel supporting base and enclosing panels made of Peraluman to
|
|
Heat pumps habitat and small tertiary
Ecological comfort at low-costs with a tax credit of 50%.
The air/water cast solid reversible heat pumps are perfect for heating/refreshing floor applications low temperatures or fan coils. To use renewable energies, with a cast solid and compact product facilitating a fast and discrete establishment in outside.
|
|
A technical solution supplements, simple and effective with TeamAO, the new Air/water CAP, which takes into account the reality of an installation of heating in floor heating or radiators.
With TeamAO, Frisquet proposes a supply complete, simple to implement and not requiring any intervention on the refrigerant.
The pack is composed of a MODULE EXTERNAL with Inverter technology, with exchanger and refrigerant filled with origin and pre proportioned to 2 kg and of an INTERIOR MODULE gathering all the elements (exchanger, bottle of mixture, regulation external,...) he allowing to control the installation and to maintain a COP high all the year, whatever the conditions of step. A glycolé primary education circuit (fluid antifreeze included in the supply) connects these 2 modules to ensure heat exchange in closed loop, therefore in an environment had a perfect command of whatever the installation of heating.
TeamAO, it is also a guaranteed comfort and energy performances optimized thanks to its modulation of power from 30% to 100% and its evaluation in real-time of the COP. Its interior module designed to be coupled to a boiler fuel or gas, or to integrate an electric resistance, allows TeamAO, to rock automatically with the most sparing energy: CAP or raises, or to combine both.
· Powers 8 kw or 11 kw
· High normative COP: 4,1 or 3,7 according to powers
· Single-phase current or three-phase current
· Connection 1.2 or 3 circuits
TeamAO, a complete unit including/understanding:
· 1 external module
· 1 interior module
· Regulation extéreure
· Coolant antifreeze, prédosé 20 L
|
|
Water chiller
WSAN-XEE: heat pump
WSAT-XEE: cooling only
Air cooled
Outdoor installation
Capacity from 24,3 to 72,2 kW
Liquid chillers and heat pumps of the ELFOEnergy WSAT-XEE and WSAN-XEE series are units designed for outdoor installation and best energy efficiency in relation to their reduced size.The ELFOEnergy series has been the turning point in the evolution of chillers.Every unit has been conceived and made by applying state-of-the-art technology,emphasising the qualities of EFFICIENCY, SELF-ADAPTATION and EASY INSTALLATION that distinguish this product Thanks to its constructional and electronic peculiarities, ELFOEnergy permits:
-high energy efficiency, in particular during partial-load operation, thanks to the use of two compressors with different capacities that work on a single refrigerant circuit;
-Eurovent energy efficiency classification class "A" in heating operation,also in full load condition;
-adaptability of operating parameters to the load conditions of the connected system, thereby optimising consumption, efficiency and working life of the parts;
-easy, quick installation thanks to the standard hydronic group and the factory test carried out prior to dispatch;
-installation of hydronic group with non-standard working head pumps or with double pump.
|
|
Water chiller
WSAN-XSC: heat pump
WSAT-XSC: cooling only
Air cooled
Outdoor installation
Capacity from 163 to 493 kW
The R-410A SPINchiller series presents a new concept of chiller offering:
-EFFICIENCY that increases as the heating load decreases, while guaranteeing maximum requested load when necessary. SPINchiller always ensures maximum comfort with very high efficiency and consequently considerable energy savings;
-a modular approach. Several basic units may be connected together to form a single structure according to the required capacity. This allows high production standardisation and therefore utmost operating RELIABILITY;
-simple unit-system combination, since these units are SELF-ADAPTING to the characteristics of the actual system, thereby avoiding delicate, timeconsuming calibrations. Easy connection to the service system plus a simple control system and easy maintenance drastically reduce work requiring specialised personnel with consequent reduction in installation costs;
-extended operating limits to keep the system running, even under exceptional start-up and load conditions;
-customisation of the unit, also for special requirements both in the civil and technological air-conditioning sphere, thanks to the many available optional accessories. The ECOBreeze and HydroPack accessories in particular enhance the qualities of flexibility and energy efficiency. The latter, for example, consistent with the concept of modularity, has several pumps in parallel with the possibility of reserve pump, to monitor the system load variations better and to regulate the water flow in the critical system starting (or restarting) stages so that outside servicing is avoided.
|
|
Water chiller
WDH: cooling only
Water cooled
Indoor installation
Capacity from 408 to 1537 kW
The experience gained by Clivet in the high-capacity chiller sector has resulted in the WDH series, with the following features:
-EFFICIENCY - Eurovent energy efficiency Class A and B thanks to the new high capacity screw compressors and to the shell-and-tube exchangers specially developed for the gas R-134a: the best compromise to boost efficiency while limiting costs. The compressors are managed with continuous adjustment of the capacity. The heat exchangers are specifically sized for best adaptation to the other parts of the refrigerant circuit. The latter is fitted with an economiser exchanger for further operating efficiency;
-SELF-ADAPTATION - New, modern and intelligent electronic control directly developed by Clivet. This customisation allows better management of all the circuit components.Continual adapting of chiller operating parameters to the load conditions of the system in which it is installed reduces consumption while the working life of the parts increases;
-STURDINESS - Load-bearing frame in enamelled hot-galvanised sheet metal with semi-hermetic double-screw compressors and shell-and-tube evaporator ensuring reliability and constant performance.
These units may be combined with the dry coolers of the REM series.
|
|
Water chiller
Water cooled
Indoor/outdoor installation
Capacity from 197 to 511 kW
The WSH-SC units belong to the SPINchiller family and therefore feature high energy efficiency, self-adaptation and reliability.
-Compactness: when designing the unit special attention was paid to reducing the dimensions of the front as much as possible. The width in the units up to 500 kW capacity has been reduced to just 85 cm so that they can pass through normal doorways.
-Special attention has been paid to making connection to the service system easy so that work requiring specialised personnel is drastically reduced thereby allowing installation costs to be cut considerably. This same policy ensured that attention was paid to easiness of controls and maintenance on all the most sensitive parts.
-EFFICIENCY that increases as the heating load decreases, while guaranteeing maximum requested load when necessary. SPINchiller always ensures maximum comfort with very high efficiency and consequently considerable energy savings;
-The particular abundance of optional accessories allows customisation of the unit, also for special requirements both in the civil and technological air-conditioning sphere. In particular the optional for the HydroPack water circulating unit, consistent with the concept of modularity, has several pumps in parallel (up to 3), to monitor the system load variations better and to regulate the water flow in the critical system starting (or restarting) stages so that outside servicing is avoided.
|
|
Aqualis 2
Air-source reversible heat pump for heating and cooling of individual homes and small businesses. May be connected to emitters that radiate gentle heat, such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or low-temperature radiators. May be installed in new or renovated housing and buildings to replace or be used in conjuction with a gas or oil-fired boiler. Designed as standard for outdoor installation without any special weather protection.
Eight models available
Heating capacity: 6 to 19 kW
Cooling capacity: 5 to 18 kW
Use:
Air-cooled chiller for cooling of individual homes and small businesses. May be connected to emitters such as underfloor heating and cooling systems or terminal units (such as fan coil units and water cassettes). Designed as standard for outdoor installation without any special weather protection.
- Complete packaged unit housed in a corrosion-resistant recyclable plastic casing,
- Scroll compressor,
- Water-cooled brazed-plate heat exchanger,
- Low-speed propeller fan,
- Hydraulic module with accelerator pump and expansion vessel,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control and self-regulating functions,
- R-410A refrigerant.
|
|
12 sizes from 40 to 222kW of Heating Capacity
Easy installation : Aquasnap includes an integrated hydronic module and a standard disconnect switch
Exceptional quiet operation: all units have scroll compressors and low noise shrouded Flying Bird II fans.
Chlorine free R407c green refrigerant
User friendly Prodialog Plus control with direct display machine main parameters : temperatures, pressures.....
Easy integration into any building thanks to reduced footprint and low profile
Standard Protection Grills
|
|
9 sizes from 19kW to 79kW
Chlorine free R407c green refrigerant
Scroll compressor design - Single circuit
Integrated Hydronic ModuleIntegrated Hydronic Module
High Static Axial Fans for Ducted Applications - 100 to 150 Pa
Direct Drive Axial Fan : no belt, no air flow adjustment at start-up
User friendly Prodialog Plus control with direct display machine main parameters : temperatures, pressures and CCN Clock board functionalities as standard*
|
|
FRYO 7 – 20 SERIES
WATER CHILLERS AND HEAT PUMPS FOR LARGE OR MIDDLE-SIZED ENVIRONMENTS
FRYO 7 – 20 SERIES water chillers are ideal for the climate control of any environment (homes, offices, factories, etc.). They are safe, reliable and easy to use.
The S letter in the water chiller’s name stands for the presence of an inertial storage tank (20 liters for 7 and 8 models, 40 liters for 15 and 20 models) to reduce the number of acceleration points of the compressor. The P letter means that the water chiller can also function as a heat pump.
|
|
Aqualis Caleo
Air-source heat pump for heating of individual homes and small businesses. As it operates in the high temperature ranges (+65°C for an outdoor temperature as low as -12°C), it can be connected to emitters of all types, terminal units (such as fan coil units and water cassettes) or radiators. May be installed in new or renovated housing and buildings to replace or be used in conjunction with a gas or oil-fired boiler. Provides complete autonomy and offers comfort and real energy savings when combined with a domestic hot-water tank and a buffer tank. Designed as standard for outdoor installation without any special weather protection.
Three models available
Heating capacity: 13 to 19 kW
- Complete packaged unit housed in a corrosion-resistant recyclable plastic casing,
- EVI (enhanced vapour injection) scroll compressor,
- Water-cooled brazed-plate heat exchanger,
- Variable-speed propeller fan,
- Inrush current limiter as standard on single-phase model, as required by French standard NF C 15 100,
- Hydraulic module with accelerator pump,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control and self-regulating functions,
- R-407C refrigerant,
- Domestic hot-water tank optional.
|
|
Aurea 2
High-temperature ground-source (earth or groundwater) reversible heat pump for heating and cooling of individual homes and small businesses. Built with all the necessary hydraulic components on the sensor and emitter side. May be connected to emitters that radiate gentle heat, such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or low-temperature radiators
Seven models available
Heating capacity: 9 to 36 kW
Use:
Air-cooled chiller for cooling of individual homes and small businesses. Built with all the necessary hydraulic components on the sensor and emitter side. May be connected to emitters such as underfloor heating and cooling systems or terminal units (such as fan coil units and water cassettes, etc.).
- Complete packaged unit,
- Coated, corrosion-resistant galvanised steel casing,
- ABS exterior panel,
- Free-standing inside frame separated from main frame by vibration isolators,
- Scroll compressor,
- Water-cooled brazed plate heat exchangers,
- Hydraulic module on both exchangers, with accelerator pump and expansion vessel,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control.
- Inrush current limiter as standard on single-phase model, as required by French standard NF C 15 100
- Domestic hot-water tank optional.
|
|
Air/Water heat pump "TeamAO"
FRISQUET provides a heat pump solution of which the main features are to be high efficient, reliable, and also to be very easy to fit up and to use. The last but not the least, TeamAO provides a real heating comfort.
With a range of 8 kW and 11 kW, single or three phase, and an efficiency COP to 4.1, the heat pump TeamAO apply to low energy houses and on the other hand, can perfectly be installed with gas or fuel boilers, or can store an electric resistor (2-4-6 kW stage). In this case, TeamAo constantly measures the COP value and automatically works at the low cost energy.
The TeamAO's supply corresponds to 2 UNITS :
- an outdoor unit with inverter system and heat exchanger. It already contains refrigerant fluid R410A.
- an indoor hydraulic unit whith control and regulating device
|
|
The Daikin Altherma total heating and cooling system is based on heat pump technology and represents a flexible and cost effective alternative to a fossil fuel boiler, with a cooling and sanitary warm water option.
The inherent energy efficiency characteristics of Altherma makes it an ideal solution to reduce energy consumption and CO2 emissions.
|
|
EHW Residential heat pump
Water-water chiller with water circulating assembly utility side
Optional: Remote controller (cod. 07225040).
Optional: Pressure valve for cooling mode (part no. 07225010 or part no. 07225020), for reducing condenser water consumption. In chiller heat pumps, this valve must be by-passed by another valve when the unit i
|
|
| ... products without information |
| |
... see all the products in the category
Heat pumps
|
|
|
