|
|
|
Electric heater 1,5-3,0 kWPahlén electric heater is designed for continuous flow with the lowest possible pressure drop. The compact dimensions make it suitable for spa pools, small swimming pools and installation in restricted spaces. The heater is manufactured from acid-proof stainless steel AISI 316. It is available in three sizes of 1,5 kW, 2,0 kW or 3,0 kW and is fitted with an adjustable thermostat 0-45°C together with automatic over heating protection.
|
|
MODEL SIZES 15kW - 24kW
Circuit breakers are fitted instead of the On/Off switch and protect the heavy power circuits against short circuit. These not only act as the main switch, but in the event of a water temperature rise within the heater being sufficient to operate the safety thermostat, a trip is triggered within the breaker such that the heater is totally isolated at its point of supply.
The unit will not operate again until both the safety thermostat and the breakers are manually reset. The operation of the safety thermostat switches off the working contactors before energising the in-built shunt trip of the breaker, giving the unique Thermalec double protection against overheating and damage to the elements.
|
|
MODEL SIZES 30kW - 36kW
Quiet operation, Reliable and superb build quality are just some of the features that make this one of our most popular heaters.
|
|
Deluxe with Power Boost - For fast warm-up times
All the more powerful Deluxe Models in the range from 15kW to 72kW have a Power Boost facility to run during the day at a reduced load whilst operating at full load during the night. Simply press the BOOST button and the pool warms up twice as quickly when the first good weather arrives. It does this by operating at full load at night, and also at reduced load during the day for the first day or two of the season. Once the pool reaches the temperature you have selected, the heater automatically reverts to operation on Economy 7 for the rest of the season.
|
|
MODEL SIZES 48kW - 72kW
The Thermalec 72PHR certainly is a smooth operator. A reliable and efficient workhorse. Ideal for large pools.
|
|
-Housing is an epoxy coated stainless steel tube. Elements are Incoloy 825.
-Power consumption 3kW.
-Max current drawn = 13 Amp (thus can be plugged into ring main via normal plug).
-Max system pressure = 3 bar. Minimum water flow = 1000 litres / hour (220 gallons).
-Temperature control range 0 to 40 deg C (depending upon ambient). Over temperature thermostat cuts out at 44 deg C.
-Flow switch fitted with time delay. Switch must be closed for a continuous period of two minutes before heating begins. This ensures that there are no pockets of air are left in any part of the system.
-Filter pump interlock works on volt free contact which is different to a conventional Thermalec. If terminals 14 and 15 are shorted together then heater can operate.
-For usual domestic use, a wire link is fitted and the flow switch is relied upon to guard against "dry" heating. For a permanently wired installation the link should be removed and terminals wired across an auxiliary contact on the filter pump contactor.
-Not suitable for salt water use
|
|
MODEL SIZES 3kW - 12kW
Robust and totally reliable the Thermalec 12PHR will give you year upon year of dependable service.
|
|
MODEL SIZES 84kW - 120kW
Circuit breakers are fitted instead of the On/Off switch and protect the heavy power circuits against short circuit. These not only act as the main switch, but in the event of a water temperature rise within the heater being sufficient to operate the safety thermostat, a trip is triggered within the breaker such that the heater is totally isolated at its point of supply. The unit will not operate again until both the safety thermostat and the breakers are manually reset. Operation of the of the safety thermostat switches off the working contactors before energising the in-built shunt trip of the breaker, giving the unique Thermalec double protection against overheating and damage to the elements.
|
|
Available from 3kW - 72kW
The tank and elements are made from 316 grade S/S
All have a control thermostat for temperature settings and an overheat thermostat
Delivered in colour coded cartons for easy shipping
All models are fish safe
|
|
¬ Swimming pool heating installation. It uses night rate electricity in hotel complexes, sports centres, clubs, private homes, buildings, and so on.
¬ This energy is the most economical, safer, reliable and the least polluting.
¬ Maximum heating time is 8 hours (23h-7h is the normal night rate tariff). If you heat up for 24 hours a day, you should divide by 3 the power shown on the table.
¬ This is the consumption during the coldest day. The rest of the time, the consumption will be lower than the one shown on one on the table.
¬ The information appearing in "Technical data" is only valid for outdoor swimming-pools when the outside temperature is not below 15ºC.
|
|
High Performance Electronic Ignition Heaters
When performance is critical, the new PowerMax® heater provides peak efficiency and easy maintenance in both indoor and outdoor applications. Seven sizes delivering up to 85% effi ciency ratings and meeting all Low NOx requirements.
|
|
High Performance Electronic Ignition Heaters
Powerful, efficient, and reliable, MegaTherm® pool heaters are designed for commercial, institutional and large residential pools where economical performance and rapid heat-up are required. Available in indoor and outdoor models in both natural and propane. MegaTherm is design certified to the ANSI® Z21.56 Standard for Gas-Fired Pool Heaters. (Outdoor 500-1825 units are certifi ed for use without the addition of a draft diverter or external vent. Indoor units incorporate a built-in draft diverter and require only vent piping.) Salt water models (500-1825) are available with cupronickel alloy heat exchanger tubes and bronze headers and header covers.
|
|
Electric heater equipped with a titanium resistance (3kw mono/three). Thermal overload protection (light signal) in case of overheating. ON/ OFF light switch. Mechanical thermostat to adjust temperature. Electric cable & switch.
|
|
Boiler rooms SKP (SuperKit Pool) associate a boiler
electric with a plate heat exchanger in INOX316L.
Heaters not n%u2019étant in contact with
water of pool, these boiler rooms can be installed on
all types of basin: chlorinated water, treatment by salt, water
of sea, %u2026 without fearing corrosion.
The determination of boiler rooms SKP always makes l%u2019objet
d%u2019une particular study according to the communicated data
at our writing desk d%u2019études.
The delivered apparatuses are thus %u201Cprêts with poser%u201D and easy with
to implement.
ELECTRIC BOILER ROOM "TURN-KEY"
Power and reliability!
Integrated Electric boiler rooms
Cable lengths Electrically and Hydraulically
Total separation of the circuits for more reliability (with plate heat exchanger STAINLESS or TITANIUM)
Units ready to pose integrating the regulation of the basin
Electric wardrobe of complete order integrating of the functions of remote control, unballasting, etc... Pools
|
|
|
|
see the results for the following category
