|
|
Medium capacity air-to-water heat pump for "high temperature" heating only. Serves as a boiler backup in large homes and multi-residential buildings as well as businesses, hotels and healthcare facilities.
Particularly suited to renovations, the unit is designed to be connected to an optional mixing tank with multiple connections that supplies water to high-temperature radiators.
This packaged unit is designed to be installed outdoors in urban environments. No special precautions are required to protect it from adverse weather other than frost (in areas where frost is a possibility).
Available in four sizes:
TDC 80Z to 150Z: High temperature HEATING only; hydraulic system without buffer tank
Heating capacity: 25 to 48 kW
Outdoor use (-20°C to +45°C)
|
|
|
|
|
|
Aqualis Caleo
Air-source heat pump for heating of individual homes and small businesses. As it operates in the high temperature ranges (+65°C for an outdoor temperature as low as -12°C), it can be connected to emitters of all types, terminal units (such as fan coil units and water cassettes) or radiators. May be installed in new or renovated housing and buildings to replace or be used in conjunction with a gas or oil-fired boiler. Provides complete autonomy and offers comfort and real energy savings when combined with a domestic hot-water tank and a buffer tank. Designed as standard for outdoor installation without any special weather protection.
Three models available
Heating capacity: 13 to 19 kW
- Complete packaged unit housed in a corrosion-resistant recyclable plastic casing,
- EVI (enhanced vapour injection) scroll compressor,
- Water-cooled brazed-plate heat exchanger,
- Variable-speed propeller fan,
- Inrush current limiter as standard on single-phase model, as required by French standard NF C 15 100,
- Hydraulic module with accelerator pump,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control and self-regulating functions,
- R-407C refrigerant,
- Domestic hot-water tank optional.
|
|
|
|
|
|
High-temperature ground-source (earth or groundwater) reversible heat pump for heating of individual homes and small businesses. Built with all the necessary hydraulic components on the sensor and emitter side. As it operates in the high temperature ranges (+65°C), it can be connected to emitters such as terminal units (e.g. fan coil units and water cassettes) or radiators. Specially designed to replace a boiler connected to radiators, with a water temperature difference of 20 K. May be installed in new or renovated housing and buildings to replace or be used in conjunction with a gas or oil-fired boiler. Provides complete autonomy and offers comfort and real energy savings when combined with a domestic hot-water tank and a buffer tank.
Seven models available
Heating capacity: 17 to 25 kW
- Complete packaged unit,
- Coated, corrosion-resistant galvanised steel casing,
- ABS exterior panel,
- Free-standing inside frame separated from main frame by vibration isolators,
- Scroll compressor,
- Water-cooled brazed plate heat exchangers,
- Hydraulic module on both exchangers, with accelerator pump and expansion vessel,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control.
- Inrush current limiter as standard on single-phase model, as required by French standard NF C 15 100
- Domestic hot-water tank optional.
|
|
Range GIORPAC R and GIORPAC High Temperature, makes it possible to cover powers of 8 with 42kW in order to propose temperatures of water exit of 35° with 65°C. Heat pumps GIORPAC R AND GIORPAC R HT thus adapt as well to the systems of heating per heating floor as to the radiators low or high temperature, for new buildings or in rehabilitation. The range is adapted some are the climatic conditions and the area. The limiting temperature of operation can go until -20°C.
Produced advantages: a raised COP, a low sound level, a robust and reliable system calling upon Scroll technology, a powerful regulation for a comfort and economies optimum. Single-phase current available until 21kW
Associated with a Solar Boiler Giordano, it cover the totality of the thermal needs for an hearth, hot water and heating, and allow up to 80% of energy saving.
|
|
To replace your boiler gas or fuel, divide your energy invoice by four. Compatible with the circuits standard radiators with a temperature d%u2019eau being able to reach 65° C.
- Reversible to offer airconditioning
- D%u2019eau medical Production hot in continuous flow
- Connection on exchanger for heating of pool and/or jacuzzi
Rare fact on the market of the ENR:
Our COP include the incidence of de-icing, and are announced of -15°C with +25°C.
These stations of eco heating are intended for the industrial sector but also for the infrastructures for which the requirements out of domestic hot water are important: Hotels, restaurants, centers of balneotherapy, hydrotherapy, thalasso, centers sporting, etc
It is also appropriate for the dwellings for which the energy needs are important (Lodgings, house of hosts, or private habitat comprising a pool).
|
|
... see all the products in the category
Heat pumps
|
|
|
