|
|
Tebis TX uses the technology of the installation bus for the control of lighting, heating and roller-shutters or other similar loads, in both residential and commercial applications.
Consumer expectations for increased control of lighting, security and heating continue to rise. Tebis TX offers simple solutions allowing installations to offer benefits that a traditional electrical installation cannot provide.
Tebis TX respects usual installation habits. Electrical contractors can continue to use familiar materials and gain precious time in planning, then wiring, as there is only one cable connecting each push button to the next. Right up to - and after - completion of wiring, you can choose which switch controls which light : the building user can decide at the last minute, or
change their mind at any time in the future with minimum fuss.
|
|
Flexibility, utilisation value and energy saving are the three main requirements for utility buildings (administration, office and public buildings, schools, hospitals, etc.). Apart from recouping investment costs, so-called life-cycle costs are also becoming increasingly important. These are made up of the investment costs (construction costs and planning) and all operating costs arising during the life of a building.
During the planning and construction phase of a new building, keeping to
the planned building costs often becomes an issue. Nobody seems, however, to be looking at the future operating costs although, according to a study produced by A.T. Kearney, these can be up to 20% of the construction cost each year. This percentage generally rises as a result of
increasing flexible use requirements. On average, operating costs have exceeded investment costs after seven years.
|
|
|
A sophisticated lighting control system can provide significant cost savings. A variety of control methods present a solution to suit any setting, ensuring that energy is not consumed unnecessarily, while providing the user with complete flexibility and control over their environment. For more information, download our Office Lighting Energy Management brochure below. Dynalite automation solutions are found in a multitude of environments from office towers to scientific laboratories, to sports fields and stadiums. Some featured case studies below provide different project scenarios.
|
|
In addition to comfort and safety, long-term sustainability, efficiency and flexibility are growing in importance in the private and commercial building field. This is no problem for the JUNG KNX system. Thanks to the networking of individual functions, it ensures an %u201Cintelligent building%u201C. The KNX sensors integrate the building into a network of devices that communicate with each other and automatically control the use of e.g. lighting, heating, air conditioning and blinds control. This also optimises the use of energy and saves on operating costs.
|
|
system of contôle of the temperature item by item
tertiary range
Contrôlede temperature item by item for residences, writing desks and trade agencies
By its system of data transmission single, Prozone 2 offers to each flexibility installation and user-friendliness for an optimum comfort: - management personalized by zone of occupation, - aeraulic solution guaranteeing a diffusion controlled and adapted to each configuration of room.
|
|
The right room temperature contributes decisively towards our feeling of well-being in all situations. Needs differ greatly in this respect, depending on where one lives and how one personally reacts to temperatures. While room temperatures of 16°C to 18°C suffice for the kitchen and bedroom, we like to have a cosy temperature of 21°C in the living room and, perhaps, even 22°C in the bathroom.
A feeling of well-being, both in private life and in the work environment, is extremely important for us as human beings. Consequently, thermal comfort is also very important as far as the health and well-being of people is concerned, because they spend 95% of their time in buildings.
But the need for comfort and cosiness does not cease when we leave our own "four walls". All the other indoor areas where we spend time (shopping centres, restaurants, sports centres, offices, ....), as different as they are from one another, should also have an appropriate temperature.
A person feels uncomfortable when the body's temperature-regulating system (the skin) is subject to stress, e.g., as a result of too low or too high air and wall temperatures, strong air movements, too low or too high humidity and to light or too heavy clothing. In these cases, concentrations of heat, or heat losses occur in the body. A person feels comfortable when the air temperature, air movement, humidity and wall temperatures are in a balanced ratio to their activity and clothing. Comfortableness and wellbeing are also favourably influenced by the cleanliness of the air and a low noise level in the room.
With an increasing demand for comfort and a reduction in energy consumption, environmental consciousness becomes more and more a part of our lives. In private households in Germany, approx. 70% of the energy consumed is for heating and hot water. Calculated on the basis of the energy consumption in the country as a whole, 30% of the total energy is consumed for heating and hot water alone. The objective when planning any heating/air-conditioning system is to achieve the desired level of comfort and cosiness while saving as much energy as possible. This is of benefit to the environment, our purse and our well-being.
In the following, it will be shown how an individual room temperature control system can be planned and installed without difficulty.
|
|
Humidistat
The relative humidity is a decisive factor for a healthy room climate. JUNG hydrostats regulate the humidity, thereby preventing damage from mould and mildew.
|
|
Manage heating with telephone dialling device
Selecting with telephone commands, via telephone dialling device, the timer thermostat operating mode (manual programme or pre-set automatic
programmes).
In homes with combined Burglar-alarm and Automation systems, the heating can be controlled remotely by sending telephone commands to the telephone dialling device. This device, suitably programmed, activates an actuator of the Automation system whose contacts are connected to the timer thermostat "remote" control terminals. When the contacts are closed, the timer thermostat is ready for operation with "manual programme and anti-frost mode", if instead the contacts are open the temperature is checked with one of the seven automatic programs available. When you are at home, the timer thermostat-operating mode is checked by means of a control device of the Automation system, configured to manage the actuator mentioned above.
|
|
Heating is kept at a comfortable temperature only when the occupants are at home. As soon as the occupants leave the house, the heating is automatically turned down to standby or eco-temperature.
At dawn, all lighting is switched off automatically where there is enough natural light.
It is impossible to switch on the garden lighting when there is enough natural light.
In winter, maximal use is made of the passive sun energy and the awning is lowered slower with bright sunlight, so that the heating reaches comfort temperature with less energy consumption.
Lighting is automatically switched off when it is left on longer than 60 minutes. Examples: garage, cellar.
You can save up to 50% in the children's bedrooms. By the use of motion-activated sensors, the children's bedrooms are not lit unnecessarily
|
|
Comfort, Control, Common Sense.
Control heating and cooling comfort where you want it, when you want it. With a Honeywell Zoning System, you won't heat empty rooms or over-cool one area in order to be comfortable in another. Zoning makes it possible for everyone to be comfortable.
You don't have to buy a new heating and cooling system for every room. A Honeywell Zoning System uses dampers in your ductwork that open and close as needed based on each zone's thermostat settings. When a zone is at the selected temperature, and doesn't need to be heated or cooled, the dampers close to save energy and maximize comfort elsewhere. Think of it as controlling your heating and cooling the same way you control your lights - a thermostat controls each zone to the temperature you choose.
Key Features
Meets American Lung Association® Health House® guidelines.
Increased comfort. No more rooms that are too hot or too cold.
Energy-efficient. Heat or cool only the areas you want, so you'll save energy.
5-year warranty.
|
|
Comfort, Control, Common Sense.
Control heating and cooling comfort where you want it, when you want it. With a Honeywell Zoning System, you won't heat empty rooms or over-cool one area in order to be comfortable in another. Zoning makes it possible for everyone to be comfortable.
You don't have to buy a new heating and cooling system for every room. A Honeywell Zoning System uses dampers in your ductwork that open and close as needed based on each zone's thermostat settings. When a zone is at the selected temperature, and doesn't need to be heated or cooled, the dampers close to save energy and maximize comfort elsewhere. Think of it as controlling your heating and cooling the same way you control your lights - a thermostat controls each zone to the temperature you choose.
Key Features
Meets American Lung Association® Health House® guidelines.
Increased comfort. No more rooms that are too hot or too cold.
Energy-efficient. Heat or cool only the areas you want, so you'll save energy.
5-year warranty.
|
|
Wish: to save energy by minutant heating.
Report
You wish to have a pleasant temperature in all the house. For this purpose, you must adjust the thermostat of each radiator to the hand. Moreover, a latency ago before the desired temperature is not reached.
The solution Schneider Electric
With KNX, the thermostat of your radiators is regulated itself. It is you who decide where, when and on which temperature. You can thus heat the parts individually, according to your rhythm of life. The morning, for example, a timer starts the heating of the room to be laid down, the bathroom and the kitchen. When you return to the house the evening, the heating of the living room is also put in step. It is not a luxury, it is a pleasant comfort and a manner simple to make savings in heating.
|
|
ClimactiveTlOO
Kit for the radio control of the temperature
ClimactiveTlOO
Kit for the radio control of the temperature
|
|
|
In addition to the programming of the times, the integrated astro program, and the optional random check generator, sun and glass-breakage sensors can be connected. They ensure that your rooms are always optimally screened. The sensor functions have priority over the time functions: If the light intensity in the room is too high, for example, the Venetian blinds automatically lower even if a different lowering time has been programmed. Naturally, they can be controlled manually at any time.
|
|
Tebis TX uses the technology of the installation bus for the control of lighting, heating and roller-shutters or other similar loads, in both residential and commercial applications.
Consumer expectations for increased control of lighting, security and heating continue to rise. Tebis TX offers simple solutions allowing installations to offer benefits that a traditional electrical installation cannot provide.
Tebis TX respects usual installation habits. Electrical contractors can continue to use familiar materials and gain precious time in planning, then wiring, as there is only one cable connecting each push button to the next. Right up to - and after - completion of wiring, you can choose which switch controls which light : the building user can decide at the last minute, or
change their mind at any time in the future with minimum fuss.
|
|
|
Wake up in the morning and raise all blinds by pressing one button? Lowering them at night again using a timer? And have various settings during the day depending on light and weather conditions? No problem a with a blinds control system by Merten. With their comprehensive control options and sensor inputs for sun and wind protection and light sensitive switching, they will meet all your needs. Merten blinds control systems are available as designs of the model series System M, System Design, System Basis and OCTOCOLOR.
|
|
CURTAINS/BLINDS, SCREENS
Integrate the control of curtains, blinds and screens into one single wall panel. The RACUB module takes care of the motor switching and can be activated from any of the Rako controllers including the wall panels, time clock, SMS and RS232 modules.
|
|
Luxury for Everybody
LUXOR Weather Protection
Modern architecture featuring more and more glass entails new requirements since one does not want to be dazzled in a building or for it to be overheated. While keeping in mind the backdrop of energy efficiency, using daylight as much as possible also plays an important role. The gadgets of the LUXOR series offer a wide range of possibilities of meeting any kind of weather condition.
Even before sunshine on the respective house fronts becomes unpleasant, Venetian blinds - with their slats at just the right angle - come down, controlled as if by magic - or else your awning protects the goods in your window display. Perfectly automatically - since your LUXOR 411 sensory module and the three light sensors that can be hooked up on it allow for three house fronts, e.g. western, southern, and eastern, to be controlled separately.
Not even rain, wind, or ice can become dangerous for your weather protection system because an additional system, the LUXOR 412 weather sensor technology , makes sure that Venetian blinds, roller blinds, and awnings are put in place right on time. Even if you are not at home, the automated blinds control makes sure everything is secure at night. An additional feature is the integrated twilight switch, which automatically controls the house entrance and yard lights.
|
|
Quick installation, easy operation: ESYLUX controls for shutters, awnings and jalousies - wire-bound or by radio
Automatic without requiring muscle power
Intelligent Technology
Protection from light for privacy and atmosphere
|
|
Security & Access
Somfy motors and controls for garage doors, gates and roller shutters protect your home, offering added security and privacy, with comfort and ease.
You don't have to get out of your car to open and close your garage door or gate, providing extra safety on cold, dark nights and reducing waiting time in the street. Features include obstacle detection, battery back up and courtesy lighting with a range of colourful transmitters.
Guaranteed to lock behind you, making your garden and home safe for children and pets to play, whilst deterring burglars.
Roller shutters on your windows will also act as a deterrent for burglars, but at the same time, they add comfort and insulation to your home. By adding Somfy motors and controls, you have the power to deploy all the shutters in your home smoothly and effortlessly within a matter of seconds.
More sophisticated control systems are also available from Somfy, which can be pre-programmed to open and close your shutters at specific times, making your home as secure as possible and simulating a presence, even when you are away.
|
|
|
There are no limits to imagination: any external electrical appliance can be controlled and automated with TVLINK.
|
|
The CENTRALIZED SWITCH OF Roller shutters
In your room or the entry, ideal to order all your roller shutters of only one gesture. You can thus manage the rise, the descent or the stopping of the selected roller shutters.
|
|
Wish: to comfortably order the blinds and the roller shutters.
Report
The blinds and the roller shutters protect from the sun, the inquisitive eyes and the intruders. But one needs much time with each time one wants to open or close the whole of the blinds and the shutters or some of them,
The solution Schneider Electric
With KNX it is much simpler. You can open or close automatically the blinds and the roller shutters one by one, in groups or all together while supporting on a button or the remote control. It is simple, it is easy and can be done anywhere.
|
|
|
|