|
|
Comprehensive ranges of HVAC controllers (room controllers and primary equipment) , infrared or radio accessories fully compatible with all RJ9 digital link & remotes controllers.
*HVAC controllers connected in a distributed way to the HVAC devices.
*Primary equipment for controlling the production units (ATU, boilers, circuits...).
*User control devices: hard-wired room devices, infrared or radio remote controllers.
*They can operate in stand alone mode, can be connected to the LONWORKS® network or configurated by "KarnoWeb" server.
|
|
The Room Control for TP/FT-10 LonWorks® networks is a product oriented to control the complete HVAC of a room, office or site. It has all the functions needed to work in stand alone mode or under a LonWorks® distributed control network to be integrated in building automation solutions.
- Power supply: 24Vac/50Hz, 24Vdc
- Media: TP/FT-10
- Digital inputs: 2
- Universal inputs: 1
- Relay outputs: 5
- Blue backlight Display LCD
|
|
Flexibility, utilisation value and energy saving are the three main requirements for utility buildings (administration, office and public buildings, schools, hospitals, etc.). Apart from recouping investment costs, so-called life-cycle costs are also becoming increasingly important. These are made up of the investment costs (construction costs and planning) and all operating costs arising during the life of a building.
During the planning and construction phase of a new building, keeping to
the planned building costs often becomes an issue. Nobody seems, however, to be looking at the future operating costs although, according to a study produced by A.T. Kearney, these can be up to 20% of the construction cost each year. This percentage generally rises as a result of
increasing flexible use requirements. On average, operating costs have exceeded investment costs after seven years.
|
|
|
|
|
|
The right room temperature contributes decisively towards our feeling of well-being in all situations. Needs differ greatly in this respect, depending on where one lives and how one personally reacts to temperatures. While room temperatures of 16°C to 18°C suffice for the kitchen and bedroom, we like to have a cosy temperature of 21°C in the living room and, perhaps, even 22°C in the bathroom.
A feeling of well-being, both in private life and in the work environment, is extremely important for us as human beings. Consequently, thermal comfort is also very important as far as the health and well-being of people is concerned, because they spend 95% of their time in buildings.
But the need for comfort and cosiness does not cease when we leave our own "four walls". All the other indoor areas where we spend time (shopping centres, restaurants, sports centres, offices, ....), as different as they are from one another, should also have an appropriate temperature.
A person feels uncomfortable when the body's temperature-regulating system (the skin) is subject to stress, e.g., as a result of too low or too high air and wall temperatures, strong air movements, too low or too high humidity and to light or too heavy clothing. In these cases, concentrations of heat, or heat losses occur in the body. A person feels comfortable when the air temperature, air movement, humidity and wall temperatures are in a balanced ratio to their activity and clothing. Comfortableness and wellbeing are also favourably influenced by the cleanliness of the air and a low noise level in the room.
With an increasing demand for comfort and a reduction in energy consumption, environmental consciousness becomes more and more a part of our lives. In private households in Germany, approx. 70% of the energy consumed is for heating and hot water. Calculated on the basis of the energy consumption in the country as a whole, 30% of the total energy is consumed for heating and hot water alone. The objective when planning any heating/air-conditioning system is to achieve the desired level of comfort and cosiness while saving as much energy as possible. This is of benefit to the environment, our purse and our well-being.
In the following, it will be shown how an individual room temperature control system can be planned and installed without difficulty.
|
|
By managing air conditioning:
- comfort levels can be optimized by adapting the indoor temperature of the home to weather conditions and lifestyles;
- energy can be saved: one degree too much represents nearly 7% more consumption.
Whatever the type of heating system – electric, gas, fuel oil or heat pump – Delta Dore offers accurate, communicating regulation and programming solutions. Room thermostats, programmable thermostats, programmers, load controllers, consumption meters… all can be new sources of savings.
|
|
Tebis TX uses the technology of the installation bus for the control of lighting, heating and roller-shutters or other similar loads, in both residential and commercial applications.
Consumer expectations for increased control of lighting, security and heating continue to rise. Tebis TX offers simple solutions allowing installations to offer benefits that a traditional electrical installation cannot provide.
Tebis TX respects usual installation habits. Electrical contractors can continue to use familiar materials and gain precious time in planning, then wiring, as there is only one cable connecting each push button to the next. Right up to - and after - completion of wiring, you can choose which switch controls which light : the building user can decide at the last minute, or
change their mind at any time in the future with minimum fuss.
|
|
Manage heating with telephone dialling device
Selecting with telephone commands, via telephone dialling device, the timer thermostat operating mode (manual programme or pre-set automatic
programmes).
In homes with combined Burglar-alarm and Automation systems, the heating can be controlled remotely by sending telephone commands to the telephone dialling device. This device, suitably programmed, activates an actuator of the Automation system whose contacts are connected to the timer thermostat "remote" control terminals. When the contacts are closed, the timer thermostat is ready for operation with "manual programme and anti-frost mode", if instead the contacts are open the temperature is checked with one of the seven automatic programs available. When you are at home, the timer thermostat-operating mode is checked by means of a control device of the Automation system, configured to manage the actuator mentioned above.
|
|
Wish: to save energy by minutant heating.
Report
You wish to have a pleasant temperature in all the house. For this purpose, you must adjust the thermostat of each radiator to the hand. Moreover, a latency ago before the desired temperature is not reached.
The solution Schneider Electric
With KNX, the thermostat of your radiators is regulated itself. It is you who decide where, when and on which temperature. You can thus heat the parts individually, according to your rhythm of life. The morning, for example, a timer starts the heating of the room to be laid down, the bathroom and the kitchen. When you return to the house the evening, the heating of the living room is also put in step. It is not a luxury, it is a pleasant comfort and a manner simple to make savings in heating.
|
|
|
In addition to comfort and safety, long-term sustainability, efficiency and flexibility are growing in importance in the private and commercial building field. This is no problem for the JUNG KNX system. Thanks to the networking of individual functions, it ensures an %u201Cintelligent building%u201C. The KNX sensors integrate the building into a network of devices that communicate with each other and automatically control the use of e.g. lighting, heating, air conditioning and blinds control. This also optimises the use of energy and saves on operating costs.
|
|
|
|
|
|
Comfort, Control, Common Sense.
Control heating and cooling comfort where you want it, when you want it. With a Honeywell Zoning System, you won't heat empty rooms or over-cool one area in order to be comfortable in another. Zoning makes it possible for everyone to be comfortable.
You don't have to buy a new heating and cooling system for every room. A Honeywell Zoning System uses dampers in your ductwork that open and close as needed based on each zone's thermostat settings. When a zone is at the selected temperature, and doesn't need to be heated or cooled, the dampers close to save energy and maximize comfort elsewhere. Think of it as controlling your heating and cooling the same way you control your lights - a thermostat controls each zone to the temperature you choose.
Key Features:
- Meets American Lung Association® Health House® guidelines.
- Increased comfort. No more rooms that are too hot or too cold.
- Energy-efficient. Heat or cool only the areas you want, so you'll save energy.
- 5-year warranty.
|
|
|
|
|
|
Comfort, Control, Common Sense.
Control heating and cooling comfort where you want it, when you want it. With a Honeywell Zoning System, you won't heat empty rooms or over-cool one area in order to be comfortable in another. Zoning makes it possible for everyone to be comfortable.
You don't have to buy a new heating and cooling system for every room. A Honeywell Zoning System uses dampers in your ductwork that open and close as needed based on each zone's thermostat settings. When a zone is at the selected temperature, and doesn't need to be heated or cooled, the dampers close to save energy and maximize comfort elsewhere. Think of it as controlling your heating and cooling the same way you control your lights - a thermostat controls each zone to the temperature you choose.
Key Features
Meets American Lung Association® Health House® guidelines.
Increased comfort. No more rooms that are too hot or too cold.
Energy-efficient. Heat or cool only the areas you want, so you'll save energy.
5-year warranty.
|
|
Humidistat
The relative humidity is a decisive factor for a healthy room climate. JUNG hydrostats regulate the humidity, thereby preventing damage from mould and mildew.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
