|
|
The elegant and compact design and 3 different colours (black, white and silver) characterize this simple hand-held transmitter. The up-down-stop function is easy to use due to big buttons.
Fitting BRFE01, BRFE15 and BRFE20
A nicely shaped holder for wall fastening is included.
Single-channel sender
Standard batteries
|
|
Welcome to "Instant heat without pre-heating"
Radiant heating systems with infrared short-wave technology for home, commercial and industrial use and for public buildings!
Radiant heat at the push of a button: The revolutionary infrared short-wave technology of our radiant heaters instantly provides comfortable heat as soon as it is turned on. The high-frequency heat waves penetrate the air without warming it. The result is energy-efficient, effective heat beamed precisely where it is needed - at people, objects and materials. This happens without the usual problems - pre-heating and its associated cost; loss from drafts or because hot air rises.
Heating & Drying - Indoor & Outdoor - Areas & Objects - Materials & Processes ...
|
|
PoSwitch is a small relay module designed to replace the cable outlet that supplies electricity to appliances such as electric heater, air conditioner or others
It can communicate with a room manager through the existing electrical installation (power line carrier network).
The PoSwitch module can control the power consumption of a heater connected to it by varying the on-off cycle. You can set the power level from the room-manager.
And like other modules, you can link the PoSwitch to any applications running in the room manager, for example to the "Preheat" function on the "Morning-Call" application.
Features:
- Replace cable outlet, fits into flush-mount round mounting box of 60mm diameter, 30mm depth.
- Switch up to 3600W (16A) loads, such as electric heater, air conditioner, etc.
- Power Cycling function, with 16 levels of duty cycle, to control heating power level.
- Communicate to the room manager via the powerline network.
|
|
|
The KWB Comfort is used to operate all KWB heating systems. Apart from controlling the burner, it also provides comprehensive heat management-from a one-family house to a local heating network.
|
|
Comprehensive ranges of HVAC controllers (room controllers and primary equipment) , infrared or radio accessories fully compatible with all RJ9 digital link & remotes controllers.
*HVAC controllers connected in a distributed way to the HVAC devices.
*Primary equipment for controlling the production units (ATU, boilers, circuits...).
*User control devices: hard-wired room devices, infrared or radio remote controllers.
*They can operate in stand alone mode, can be connected to the LONWORKS® network or configurated by "KarnoWeb" server.
|
|
The Room Control for TP/FT-10 LonWorks® networks is a product oriented to control the complete HVAC of a room, office or site. It has all the functions needed to work in stand alone mode or under a LonWorks® distributed control network to be integrated in building automation solutions.
- Power supply: 24Vac/50Hz, 24Vdc
- Media: TP/FT-10
- Digital inputs: 2
- Universal inputs: 1
- Relay outputs: 5
- Blue backlight Display LCD
|
|
|
|
|
|
The right room temperature contributes decisively towards our feeling of well-being in all situations. Needs differ greatly in this respect, depending on where one lives and how one personally reacts to temperatures. While room temperatures of 16°C to 18°C suffice for the kitchen and bedroom, we like to have a cosy temperature of 21°C in the living room and, perhaps, even 22°C in the bathroom.
A feeling of well-being, both in private life and in the work environment, is extremely important for us as human beings. Consequently, thermal comfort is also very important as far as the health and well-being of people is concerned, because they spend 95% of their time in buildings.
But the need for comfort and cosiness does not cease when we leave our own "four walls". All the other indoor areas where we spend time (shopping centres, restaurants, sports centres, offices, ....), as different as they are from one another, should also have an appropriate temperature.
A person feels uncomfortable when the body's temperature-regulating system (the skin) is subject to stress, e.g., as a result of too low or too high air and wall temperatures, strong air movements, too low or too high humidity and to light or too heavy clothing. In these cases, concentrations of heat, or heat losses occur in the body. A person feels comfortable when the air temperature, air movement, humidity and wall temperatures are in a balanced ratio to their activity and clothing. Comfortableness and wellbeing are also favourably influenced by the cleanliness of the air and a low noise level in the room.
With an increasing demand for comfort and a reduction in energy consumption, environmental consciousness becomes more and more a part of our lives. In private households in Germany, approx. 70% of the energy consumed is for heating and hot water. Calculated on the basis of the energy consumption in the country as a whole, 30% of the total energy is consumed for heating and hot water alone. The objective when planning any heating/air-conditioning system is to achieve the desired level of comfort and cosiness while saving as much energy as possible. This is of benefit to the environment, our purse and our well-being.
In the following, it will be shown how an individual room temperature control system can be planned and installed without difficulty.
|
|
By managing air conditioning:
- comfort levels can be optimized by adapting the indoor temperature of the home to weather conditions and lifestyles;
- energy can be saved: one degree too much represents nearly 7% more consumption.
Whatever the type of heating system – electric, gas, fuel oil or heat pump – Delta Dore offers accurate, communicating regulation and programming solutions. Room thermostats, programmable thermostats, programmers, load controllers, consumption meters… all can be new sources of savings.
|
|
Tebis TX uses the technology of the installation bus for the control of lighting, heating and roller-shutters or other similar loads, in both residential and commercial applications.
Consumer expectations for increased control of lighting, security and heating continue to rise. Tebis TX offers simple solutions allowing installations to offer benefits that a traditional electrical installation cannot provide.
Tebis TX respects usual installation habits. Electrical contractors can continue to use familiar materials and gain precious time in planning, then wiring, as there is only one cable connecting each push button to the next. Right up to - and after - completion of wiring, you can choose which switch controls which light : the building user can decide at the last minute, or
change their mind at any time in the future with minimum fuss.
|
|
Manage heating with telephone dialling device
Selecting with telephone commands, via telephone dialling device, the timer thermostat operating mode (manual programme or pre-set automatic
programmes).
In homes with combined Burglar-alarm and Automation systems, the heating can be controlled remotely by sending telephone commands to the telephone dialling device. This device, suitably programmed, activates an actuator of the Automation system whose contacts are connected to the timer thermostat "remote" control terminals. When the contacts are closed, the timer thermostat is ready for operation with "manual programme and anti-frost mode", if instead the contacts are open the temperature is checked with one of the seven automatic programs available. When you are at home, the timer thermostat-operating mode is checked by means of a control device of the Automation system, configured to manage the actuator mentioned above.
|
|
Wish: to save energy by minutant heating.
Report
You wish to have a pleasant temperature in all the house. For this purpose, you must adjust the thermostat of each radiator to the hand. Moreover, a latency ago before the desired temperature is not reached.
The solution Schneider Electric
With KNX, the thermostat of your radiators is regulated itself. It is you who decide where, when and on which temperature. You can thus heat the parts individually, according to your rhythm of life. The morning, for example, a timer starts the heating of the room to be laid down, the bathroom and the kitchen. When you return to the house the evening, the heating of the living room is also put in step. It is not a luxury, it is a pleasant comfort and a manner simple to make savings in heating.
|
|
|
|
|
|
Comfort, Control, Common Sense.
Control heating and cooling comfort where you want it, when you want it. With a Honeywell Zoning System, you won't heat empty rooms or over-cool one area in order to be comfortable in another. Zoning makes it possible for everyone to be comfortable.
You don't have to buy a new heating and cooling system for every room. A Honeywell Zoning System uses dampers in your ductwork that open and close as needed based on each zone's thermostat settings. When a zone is at the selected temperature, and doesn't need to be heated or cooled, the dampers close to save energy and maximize comfort elsewhere. Think of it as controlling your heating and cooling the same way you control your lights - a thermostat controls each zone to the temperature you choose.
Key Features:
- Meets American Lung Association® Health House® guidelines.
- Increased comfort. No more rooms that are too hot or too cold.
- Energy-efficient. Heat or cool only the areas you want, so you'll save energy.
- 5-year warranty.
|
|
|
|
|
|
Comfort, Control, Common Sense.
Control heating and cooling comfort where you want it, when you want it. With a Honeywell Zoning System, you won't heat empty rooms or over-cool one area in order to be comfortable in another. Zoning makes it possible for everyone to be comfortable.
You don't have to buy a new heating and cooling system for every room. A Honeywell Zoning System uses dampers in your ductwork that open and close as needed based on each zone's thermostat settings. When a zone is at the selected temperature, and doesn't need to be heated or cooled, the dampers close to save energy and maximize comfort elsewhere. Think of it as controlling your heating and cooling the same way you control your lights - a thermostat controls each zone to the temperature you choose.
Key Features
Meets American Lung Association® Health House® guidelines.
Increased comfort. No more rooms that are too hot or too cold.
Energy-efficient. Heat or cool only the areas you want, so you'll save energy.
5-year warranty.
|
|
Humidistat
The relative humidity is a decisive factor for a healthy room climate. JUNG hydrostats regulate the humidity, thereby preventing damage from mould and mildew.
|
|
| ... products without information |
| |
|
|
|
|
Discover the easy way to deliver first class food service to your guests!
SICO stainless steel Food Warmer Boxes (‘Hot Boxes’) are designed to keep food warm during transit from the kitchen to guest rooms, whilst maintaining its original quality - food does not dry out or overcook.
SICO Hot Boxes have four shelves instead of three, so there is more usable space, allowing additional servings to be carried in every unit. This effectively reduces the number of trips to and from the kitchen.
The units are both energy efficient and user friendly - all sides and the door are insulated to retain heat, whilst the top stays cool to the touch.
Our food warmers are easy to use, too! Just plug in and turn on the switch on the back. Each unit has a built-in thermostat to keep the temperature at the optimum level.
The exterior is stainless steel, and the interior is aluminum. Both clean quickly and easily, and the back panel is removable so repairs to the unit are easy and affordable.
Our Hot Boxes are even perfect for transporting cold food, as well as hot!
To accompany our Hot Boxes, we supply Mobile Transport Caddies (pictured), which house a maximum of six units. We also supply Gravity-Feed Storage Racks which preheat and store up to 18 boxes at one time within a confined space.
Contact us now for more information!
|
|
AM0106105074 | EHK/50
ELECTRIC STOCK POT STOVE
Dimensions: 560 x 560 x 540 mm
Nett Weight: 40 kg - Brutt weight: 43 kg
Volume: 0,2 m³ - Electric power: 5,0 kW
|
|
Prefocused heat pattern maintains optimum serving temperatures without drying out the food.
Retain the internal moisture thereby increasing holding times and minimizing the risk of food-borne illnesses.
Complete line with unlimited design capability - single or dual widths, various heating sources, lights, colors, breath protectors and mounting styles.
|
|
Ultra-high performance in a compact, quiet, and eco-friendly design
MasterTemp® Heaters offer all the efficiency, convenience, and reliability features you want in a pool heater, plus a lot more fast heat-up, compact design, super quiet operation, easy to use, and eco-friendly.
An Eco Select™ Choice: MasterTemp® Heaters offer best-in-class energy efficiency. Plus, they are certified for low NOx emissions, making them eco-friendly favorites.
Features
Heats up fast so no long waits before enjoying your pool or spa
Best-in-class energy efficiency
Manual gas shut-off when service is required
Eco-friendly MasterTemp® is certified for low NOx emission and outperforms industry standards
Rotating digital display allows for easy viewing
Tough, rustproof exterior handles the heat and weathers the elements
|
|
|
|
|
|
Get that warm-all-over feeling
For indoor or outdoor installations on pools and spas. Features include an LED temperature readout with dual thermostat controls, temperature safety lockout, and 6-position control panel. PMG burner technology requires no outdoor draft hood. Proven Dura-Glas® rust-proof construction with plastic manifold and PVC union connections. Heavy-duty unit with cupro-nickel exchanger stands up to the harshest of applications, like low pH, high flow or heavy use.
An Eco Select™ Choice: Max-E-Therm® high performance heaters offer best-in-class energy efficiency. Plus, they are certified for low NOx emissions, making them eco-friendly favorites.
Features
Lightweight - Lightest heater in its class
Compact Design - Ideal for retro-fit installation
Easy to Switch - Change gas sources with installation of separate orifice
Environmentally Friendly - All units are low NOx
Rustproof Housing Sleek, matte black enclosure is made of{PROD:Dura-Glass - an exclusive Sta-Rite material that handles the heat and weathers the elements
Lower Operating Costs - 84% efficiency rating - rated 1st in its class for highest energy efficiency
Custom or Retrofit - Direct-connects to Sta-Rite System:3® Mod Media filter or easily fits other systems
|
|
¬ Swimming pool heating installation. It uses night rate electricity in hotel complexes, sports centres, clubs, private homes, buildings, and so on.
¬ This energy is the most economical, safer, reliable and the least polluting.
¬ Maximum heating time is 8 hours (23h-7h is the normal night rate tariff). If you heat up for 24 hours a day, you should divide by 3 the power shown on the table.
¬ This is the consumption during the coldest day. The rest of the time, the consumption will be lower than the one shown on one on the table.
¬ The information appearing in "Technical data" is only valid for outdoor swimming-pools when the outside temperature is not below 15ºC.
|
|
 see the results for the following category : Gas boilers |
|
|
