|
|
|
In addition to the programming of the times, the integrated astro program, and the optional random check generator, sun and glass-breakage sensors can be connected. They ensure that your rooms are always optimally screened. The sensor functions have priority over the time functions: If the light intensity in the room is too high, for example, the Venetian blinds automatically lower even if a different lowering time has been programmed. Naturally, they can be controlled manually at any time.
|
|
Tebis TX uses the technology of the installation bus for the control of lighting, heating and roller-shutters or other similar loads, in both residential and commercial applications.
Consumer expectations for increased control of lighting, security and heating continue to rise. Tebis TX offers simple solutions allowing installations to offer benefits that a traditional electrical installation cannot provide.
Tebis TX respects usual installation habits. Electrical contractors can continue to use familiar materials and gain precious time in planning, then wiring, as there is only one cable connecting each push button to the next. Right up to - and after - completion of wiring, you can choose which switch controls which light : the building user can decide at the last minute, or
change their mind at any time in the future with minimum fuss.
|
|
|
Wake up in the morning and raise all blinds by pressing one button? Lowering them at night again using a timer? And have various settings during the day depending on light and weather conditions? No problem a€“ with a blinds control system by Merten. With their comprehensive control options and sensor inputs for sun and wind protection and light sensitive switching, they will meet all your needs. Merten blinds control systems are available as designs of the model series System M, System Design, System Basis and OCTOCOLOR.
|
|
CURTAINS/BLINDS, SCREENS
Integrate the control of curtains, blinds and screens into one single wall panel. The RACUB module takes care of the motor switching and can be activated from any of the Rako controllers including the wall panels, time clock, SMS and RS232 modules.
|
|
Quick installation, easy operation: ESYLUX controls for shutters, awnings and jalousies - wire-bound or by radio
Automatic without requiring muscle power
Intelligent Technology
Protection from light for privacy and atmosphere
|
|
Security & Access
Somfy motors and controls for garage doors, gates and roller shutters protect your home, offering added security and privacy, with comfort and ease.
You don't have to get out of your car to open and close your garage door or gate, providing extra safety on cold, dark nights and reducing waiting time in the street. Features include obstacle detection, battery back up and courtesy lighting with a range of colourful transmitters.
Guaranteed to lock behind you, making your garden and home safe for children and pets to play, whilst deterring burglars.
Roller shutters on your windows will also act as a deterrent for burglars, but at the same time, they add comfort and insulation to your home. By adding Somfy motors and controls, you have the power to deploy all the shutters in your home smoothly and effortlessly within a matter of seconds.
More sophisticated control systems are also available from Somfy, which can be pre-programmed to open and close your shutters at specific times, making your home as secure as possible and simulating a presence, even when you are away.
|
|
|
There are no limits to imagination: any external electrical appliance can be controlled and automated with TVLINK.
|
|
We design our homes and workspaces with windows because we intuitively understand that sunlight adds a comforting, refreshing quality to any room. However, achieving the greatest beauty and efficiency in each room means being able to control the light that surrounds you. With Lutron Shading Solutions you can quickly and easily control sunlight to prevent harsh U/V rays from damaging expensive furnishings. With the touch of a button, you can automatically raise and lower shades to reduce heat buildup or add instant privacy.
|
|
The CENTRALIZED SWITCH OF Roller shutters
In your room or the entry, ideal to order all your roller shutters of only one gesture. You can thus manage the rise, the descent or the stopping of the selected roller shutters.
|
|
Wish: to comfortably order the blinds and the roller shutters.
Report
The blinds and the roller shutters protect from the sun, the inquisitive eyes and the intruders. But one needs much time with each time one wants to open or close the whole of the blinds and the shutters or some of them,
The solution Schneider Electric
With KNX it is much simpler. You can open or close automatically the blinds and the roller shutters one by one, in groups or all together while supporting on a button or the remote control. It is simple, it is easy and can be done anywhere.
|
|
Comprehensive ranges of "light" and "sunblind" controllers, infrared or radio accessories fully compatible with all RJ9 digital link & remotes controllers.
*Light controllers connected in a distributed way to the lighting devices.
*Sensors connected to the controllers : infrared or radio receivers, presence detectors, ambient luminosity measurement cells.
*User control devices : infrared or radio remote controllers.
Building offices & facilities programming configuration :
- Open & inter operable LonWorks® network (Building management system).
- Web server via a friendly graphical interface.
- Stand alone mode (standard configuration).
|
|
Without domotics, you find yourself moving around your house all the time: for instance lowering first-floor blinds because of the sunlight, going out to open the gate, going upstairs to switch off the lights, going into each room to set the heating, enabling or disabling the alarm, etc.
Domotics according to Delta Dore will change your life by automating and centralising the functions that take up time in your day-to-day life:
Domotics : products that interact with each other
Delta Dore products are created for different applications such as heating management, alarms and control systems. They can all to communicate with each other to provide you with the best possible levels of comfort.
Domotics : ease of use
Pressing a single button can trigger all the pre-programmed actions that you have chosen beforehand according to your lifestyle.
Domotics : upgradeability at your own pace
There is no problem if you cannot or do not want to equip everything all at once.
You can install what you feel is essential for your home at your own pace. Start with what you and your family consider to be a priority, everything will come together as and when you make your purchases.
You will rapidly discover the advantages of the systems' interaction with each other. You can then continue to extend your domotics system to reflect your lifestyle.
|
|
Building facades have to meet a wide range of demands. The architectural design primarily focuses on aesthetic aspects. After all, the
facade determines the visual appearance of a building. From an engineering point of view the facade also has to meet thermal insulation,
glare protection and safety requirements.
The facade can have a positive infl uence on energy consumption and well-being of the building users only through integration of
external shading, internal glare protection, window and door contacts plus window and door drives, weather data and internal data such
as air quality and temperature.
The combination of corresponding Bus Terminals in the fi eld level and software libraries in the automation level enables integration
of the facade into the building automation scheme.
|
|
| ... products without information |
| |
ed[it]ion´s technical features are even more refined and more efficient so that you can lean back and really enjoy the comfort it gives. In addition, the Internorm ed[it]ion wood/aluminum window impresses through a unique principle: cosy wood on the interior, weather resistant aluminum on the exterior and a highly insulating thermal foam in between. ThisYou not only enjoy more heat insulation, but also a more noble design in 3 styles, additional security thanks to basic security in all wooden/aluminium systems and many more advantages.
|
|
It’s one of the new our products we introduced in the International market to meet our customer’s requirements.
By a thorough analysis of the more advanced technologies in the worldwide market EN.GI.EI. can assure a reliable system with high quality materials.
All components interacts amoung themselves and assure an optimal working and a long life with the best ratio quality-price.
The Tilt and Turn Kit is composed of an ambidextrous mechanism adaptable to windows having a width between 365 mm. and 1.300 mm. and a height between 500 mm. and 2.450 mm.
Supplemental arms are envisaged for applications where the widht is greater than 1.300 mm. and supplemental closures where the height exceeds 1.200 mm.
The mechanism is also provided with a special system for the protection against incorrect manoeuvres, forced entry protection , various adjustment devices and It’s characterized by an installation performed using a simple and intuitive procedure that reduces the installation times.
Another , but not the last important characteristic is provided by the fact that It’s possible to match the B 101 cremone aesthetically matching the kit with the rest of normal hinged opening windows.
It should be noted that the height of the hinge unit is equal to 100 mm. adapting itself to the aesthetics of the standard hinge closing window.
|
|
| ... products without information |
| |
| ... products without information |
| |
Lamp Shade 1
[214]
»lampshade« is a design classic a simple and elegant solution to everyday lighting problems. the clip-on reflector focuses the light and offers protection without disrupting the functional beauty of the bulb.
british designer sebastian bergne designed the reflector in 1991 and it has been included in the permanent collection of the museum of modern art in new york.
the hanging version, »lampshade« no.1, is easy to attach so as to focus the light either upwards or downwards. a textile-covered two-meter cable and a shade are supplied as standard.
design: sebastian bergne
material: brass, high grade steel
measurements: 35 cm wide, ca. 14 cm high
bulb: 60 w, b22d
|
|
Natural leaves
Mais Classic large.
handmade shade from corn leaves, available in natural, black, brown or green.
warm and vivid.
|
|
400 Series Picture Windows for Awning Windows
High-Performance™ Low-E4® glass stays cleaner and reduces water spotting
Rich natural wood interior
Attractive low-maintenance exteriors
Larger glass area lets in more light
Aligns with 400 Series Awning windows
Use as single window or in combinations
Wide range of sizes
Variety of grille options
|
|
style: umbra tile | 59531
color: bright chartreu | 29546
product type: tile
texture: multilevel pattern loop
fiber: 100% eco*solution Q Premium Branded Nylon
backing: ecoworx®
dye method: solution dyed
face weight: 26 oz.
warranty: lifetime commercial limited warranty for ecoworx tile backing system, lifetime commercial limited warranty for ecosolution q nylon
collection: shade
|
|
‘Light Shade Shade’ is a one way mirror that reflects its environment as well as concealing the chandelier within. When the light is turned on, the ‘Light Shade Shade’ reveals its unforeseen identity and projects the former beauty that lies within.
The Light Shade Shade is part of the Moooi weer collection and may also be sold without the inner Shade to breath life back to your aging chandelier.
Material: semi-transparant mirror film surrounding an old lamp.
Colour: semi-transparant mirror film
Available in different types:
A. Chandelier, shade ø 47 x 82 cm
B. 5-armed chandelier, shade ø 70 x 75 cm
C. 18-armed chandelier. Shade ø 95 x 75 cm
optional: shade only version to hang over your own old lamp
Light fitting A: 3 x E27 lightbulb matt, max 60 Watt
Light fitting B: 5 x E14 lightbulb matt, max 40 Watt
Light fitting C: 18 x E14 lightbulb matt, max 40 Watt
|
|
|
|
