|
|
TANUS is made with cold-rolled steel pipes, 20 mm in diameter.
The semi-oval pipe manifolds measure 35x35 mm.
Maximum acceptable operating temperature: 95°c.
Standard colour glossy white RAL 9010.
TANUS is a dual-purpose radiator-cum-furnishing item by D.A.S., with a simple, slim and refined line. It is the ideal solution for entrance halls and fits in easily with both modern and traditional interiors.
|
|
Sectional radiator
Because of its classic design, this sectional radiator is particularly suitable for contemporary designs with a touch of nostalgia.
This radiator comes in the standard colour white (RAL 9010), but is upon request also available in most RAL colours.
Window radiator
Because of their high heat-exchange these radiators are utmost suitable to be installed in large areas and for window parts.
The window radiator is special because of the intermediate section (36 mm) that is fitted between the pipes, which favours a more transparent design and an enhanced light penetration.
This radiator comes in the standard colour white (RAL 9010), but is upon request also available in most RAL colours.
|
|
Specifications text
The Standard radiator is deliverable in 6 versions, from a radiator with 1 plate without convector up to a radiator with three plates and 3 convectors (incl. welded-on strips). Thanks to the 4 x 1/2" connections, this model is suitable for both 1- as well as for 2-pipe systems. The Standard radiator is delivered in the standard colour white (RAL 9010).
Fittings
This radiator is delivered standard with a full assembly set (L-brackets, plugs, bolts), blinding plug, and de-aerator.
Accessories
Standard type is as option available with towel bracket in the standard colour white.
|
|
|
The Lotus Type H comprises horizontal flat-oval steel tubes of 70 x 10 x 1.5 mm and two vertical square rear collectors of 34 x 34 x 2 mm. Between the flat-oval tubes, there is a distance of 2.5 mm, for aesthetic considerations, and to guarantee a total protection against corrosion. On type HL, one or two rows of steel fins (H1L1, H2L1, H2L2) are spot welded on the flat-oval tubes to increase the heat emission. Lotus is available with one row (type H1) or with two rows (type H2) of flat-oval tubes. Type H is electrically welded by means of resistance welding robots, which gives the advantage of invisible weld seams. Eccentric wall supports are used for mounting, so the height can simply be adjusted by the installer. The standard tube thickness of the flat-oval tubes equals 1.5 mm with a service pressure of 4 bar (test pressure 6 bar). With a tube thickness of 2 mm, the service pressure is 10 bar (test pressure 13 bar) (with extra charge and a longer delivery time). The maximum operating temperature is always 110°C. VASCO decorative radiators are, just like in a car factory, degreased, rinsed, phosphated, rinsed with demineralized water, primed using electrophoresis (KTL-bath), dried at 200°C and then painted by means of electrostatic powder coating with epoxy-polyester.
|
|
Types: HDM (straight), HDRM (curved)
bathroom radiators
Tubes: horizontal, round 22 mm
Collectors: vertical, D-profile 34 x 34 mm
Accessories: folding chrome plated drying & stacking rack as
standard
Finish: electrically laser welded (invisible weld seams),
primed using electrophoresis,
electrostatic powder coating with epoxy-polyester
Valve set Suspension Formation: applicable wall mountings delivered as standard HDM (vertical): wall mounting, free-standing
HDRM (vertical): wall mounting
Operating pressure: 10 bar (standard)
Electrical: can be equiped with an electrical resistance
Particularities: not available in the colour M350 stainless steel look
Connections: standard universal connection (1MM8)
6 x 1/2" (vertical), MM, 18, 81, 45, 54
Stock radiators: 1MM8 (1188)
Possibility to change supply and return
Flow tube must be in the supply (standard right)
Connection 45: order a special flow tube
X-34
|
|
|
The new, unique, Acova Altai is a central heating radiator available in vertical or horizontal format. With its slim-line single or double tubes, it can meet any central heating requirement.
|
|
This object of beauty has been created from the simplest of shapes. The apparent simplicity is beguiling, however, as Outline is a complex relationship of small radii at the end of long, straight parallel tubes which are oval in cross section.
Designed by Paul Priestman for Bisque.
Horizontal model (OH3) = 172mm high
Available in 3 lengths: 1000mm; 1400mm; 1800mm
Available in white or aluminium finish
|
|
Assertive and formal, this square tube version of the immensely popular Seta radiator encompasses the same technology, and is set to angle well in a traditional or modern interior.
Horizontal models available at 420mm or 620mm high
Available in 3 lengths: 635mm; 830mm; 1025mm
Vertical models available at 1520mm or 1820mm high
Available in 2 lengths: 310mm; 440mm
White, Matt Black or Metallica finishes.
|
|
Seta's revolutionary design and construction make this one of Bisque's most popular radiators.
Practical and efficient, with rounded 'pepper pot' tops, this robust model makes a bold and powerful statement.
Available in 14 sizes: white; matt black; metallica; chrome
|
|
No longer hidden behind grilles, the industrial heating element appears as a beautiful object in its own right.
Flow Form's spiral fin,designed for technical efficiency, adds a dramatic twist to modern living.
Available in 3 sizes.
Small diamater models: white; matt black; argenta
Large diameter models: white; matt black; argenta; chrome
Large diameter models are also available in electric-only versions.
|
|
ETERM room wire radiators are extremely light and available in a variety of standard sizes, and are therefore the right choice for most residential, business and other premises. They are simple replacement for worn-out classic radiators. Multi-variety connection to the heating system is simple and fast while the possibility of parallel and serial connections offers higher heat values.
|
|
This minimalist vertical radiator has flat front panel and closed, slightly curved side covers....
|
|
The Compact radiator is available in several different versions, allowing you to install a panel radiator that is suitable for your room. The Ventil is a variation on the classic Compact model. The profiled front hides the pipe system and valve, creating a clean, uncluttered look.
|
|
The Planora is the answer to modern building requirements. It has a plain, almost invisible panel that can be painted to blend in with any colour scheme.
The Planora is one of the most energy efficient designs available. It only requires a small amount of water to function; it heats up very quickly, and is easy to control. It also features a large convector plate within the design, which allows heat to be expelled across a greater surface area, distributing heat more effectively around the room.
Produced from the highest quality materials, it is robust, easy to clean, and has a solid, scratch resistant coating. The Planora is also economical to run, making it the most flexible, modern radiator on the market.
Information
Structure: EN 442.1 and 2
Material: Cold rolled steel EN 10130
Surface process: The radiator is - alkalic degreased, phosphated, dipped in primer (electrical), coated in polyester-epoxy resin powder, stoved (about 200°C). The surface process follows the standard DIN 55900
Colour: White, RAL 9016
Working pressure: PN 6
Quality Standard: SFS-EN ISO 9002
Heights (mm): 300, 400, 500, 600, 900
Lengths (mm): 400, 500, 600, 700, 800, 900, 1000, 1200, 1400, 1600,1800, 2000, 2300, 2600, 3000
|
|
Tubular radiators double column COSMOGAS heat and comfort in a modern form
DUEL is a line of radiators devised for the modern solutions of furnishing. The remarkable surface of heat exchange and the multiple combinations use allow it of this element of furnishings also in great atmospheres.
|
|
Evolved, technological, revolutionary. The line of Cento aluminium radiators combines all the qualities of domestic heating. This target has been reached thanks to a deep research carried out during the planning phase, which has radically transformed the concept of heating: rather than quantitative efficiency, Ragall has privileged the quality value of the plan, in relation to man's new requirements.
The technical solutions that have been found provide an excellent balanct between the humidity level and Ihe purity of the air, ensuring a heat that will integrate with the living spaces, improving the microclimate.
|
|
The highly advanced industrial design is the result of careful conceptual research: encouraging the air's natural dynamic, preventing useless losses of energy, and being able to offer excellent results thanks to perfect hydrodynamic performance.
Guaranteed to last ten years and boasting certified quality (UNI EN ISO 9002), the Ragall 102 is safe and secure no matter how you look at it - an ergonomic design with high-level non-toxic and non-allergenic properties to the degree that it confirms, yet again, the success of a line whose unique characteristic is its constant quest for more and more evolved solutions.
|
|
Small and compact: these are the features of Astérie 200, a radiator that solves any problems relating to space, adapting perfectly to various types of environment.
Thanks to its special fixing systems, it can be installed directly on the walls, or positioned in places where there is glass, partition walls and mobile dividers, with special floor brackets.
|
|
Avant-garde design, calibrated lines, details that have been given the
utmost attention and care, and extreme strictness with regard to form
have made the Ragall 103 a perfect ensemble that can boast both form
and content.
The new design is characterised by its unique fins, which have been
created to help diffuse heat optimally and evenly toward the centre of the
room.
|
|
planet pv70
Models PV70 are of the radiators with vertical elements to slab.
These elements are placed in parallel with the collector and have dimensions of 70x11 milimeter
The vertical elements are disposed in an only row and knit in front of the two horizontal collectors.
In order to characterize the heater model to order, you proceed as it follows:
characterized and specified code (es. PV70), height (es. 200), the number of elements (es. 4
par to a width of 28 cm), the type of attack (es. P1D) and at last the color (es. white man ral
9010). Therefore, in this example, the complete code is: PV70/200 cm/4 el. /attacks P1D/
color ral 9010.
Calculation of the Width
L = n. 70 elements x milimeter
Contained of water
You see pag. 126
Models PV70 cannot have no type of special flag supports.
|
|
|
ISTEK aluminium radiators are manufactured as standard with the heights of 400, 500, 600, 800, 1000, 1200 and with intervais 100 mm each, between 500 and 1800 mm. Segment widths; front side is 74 mm. and back side is 69 mm. lt's possible that manufacture of the difterent dimensions on demand.
|
|
| ... products without information |
| |
|
|
