|
|
EPP-36 Maximus water heater is designed for industrial use. It has its application in places where a considerable amount of hot water is needed, e.g. an assembly line.
water temperature modulation from 30°C to 60°C
electronic power modulation depending on the flow of water
starts work at such low flow rate as 2,5 l/min and the minimal pressure of 0,1 MPa
larger heating box and bigger surface of heating elements ensure longer life
|
|
KDH Luksus water heater is suitable for supplying hot water to many taps at home, in a workshop or at a public facility.
power consumption: from 9kW to 24 kW/400 V
starts working the moment you turn the hot water tap on
power selection according to water flow rate
economy selection knob, limiting power consumption
German VDE Institute approval
|
|
EPVE Focus elektronik brand new instantaneous water heater offers hot water at a few taps, assures stable temperature despite of flow and pressure changes.
* LCD display
* electronic power modulation
* pressure overheating cut-out
* precise temperature setting (1°C)
|
|
EPJ 3,5 kW Optimus water heater is designed to use it at sinks. Water heaters EPJ Optimus with power consumption of 4,4 kW and 5,5 kW enable to obtain greater volume of hot water, e.g. in the kitchen..
the most reliable technology using copper in heating elements that ensures durability and resistance to air sac
new designs
fine-stream spray-head guarantees comfortable use and savings on water and energy up to 50%!
|
|
EPA Opus water heater is offered in three versions: sink and sink-shower and shower.
power consumption: 6,8 kW, 8,4 kW/230V and 7,0 kW, 8,6 kW/400V 2~
electronic water temperature modulation
flow modulation
IP25 safety class enables assembly inside a shower cabinet
equipped with a shower head which guarantees savings on water and energy up to 50%!
|
|
EPO Amicus water heater is a perfect solution if you need hot water in your kitchen or a single sink. It can be also connected to two sinks that are located near to each other (if not used at the same time) and to a sink and a shower (under a condition that you use appropriate fittings: double-stream spray-heads).
power consumption rate: 4 kW, 5 kW and 6 kW/230 V ( or 400 V 2N~)
pressure construction that enables switching to hot water system and switching to any tap
EPO.D type-suitable for fixing it under a sink
EPO.G type- installation with inlet and outlet pipes at the bottom
German VDE Institute approval
|
|
KDE Bonus elektronik water heater is able to supply hot water to several taps in different locations such as a bath, a shower or a sink. By using this water heater you can save even more on energy.
Electronic power adjustment
Reliable copper shielded heating coils
Water temperature modulation from 30°C to 60°C
Can work on already pre-heated water
Thanks to the high quality flow sensor the heater starts work at such a low flow rate as 2,5 l/min and the pressure of 0,1 MPa
Rated power from 9kW to 27kW
Option of priority switch (if the system is run in a conjuction with another high electric power consumption appliance)
Safety cut-out
CE declaration and German VDE Institute certificate confirms the high quality of the water heater.
|
|
Luna - storage water heaters are more than easy to install - only cold water supplies and a simple electric socket needed. It is a perfect device if you need small amounts of hot water at a time in places like kitchens, toilets, garages.
Pressure 5 Litre water heater - POC Luna INOX
stainless steel container
connectable to any tap (POC.G or POC.D)
Non-pressure 10 Litre water heater - POW Luna
with a tap included in a set (POC.Gb or POC.Db)
- available in above and under sink versions,
- excellent thermal insulation,
- fast heating as a 2kW heating element is used,
- temperature adjustment from 23 C to 70 C,
- anti-freeze temperature setting so you can install it in a cold place.
|
|
|
OSV Slim is a wall-mounted capacity water heater. Slim storage water heater was designed especially for limited space. Thanks to reducing the width to 36 cm only, it occupies much less space than traditional storage water heaters.
|
|
FERROLI ELECTRIC STORAGE HEATERS
HIGH QUALITY COLD-ROLLED STEEL
"BLUE SILICON" ENAMEL POWDER COATING PROCESS
CAPACITY FROM 5,5 TO 100 LITRES
|
|
Domestic hot water for showers in large facilities (Hotels, leisure facilities, etc.) is one of the most important services offered to customers, but it is often deficient due to the lack of hot water supply in peak hours and to the excessive energy consumption.
¬ Our method of Hot Water production has been designed to obtain higher efficiency, which results in a greater saving of energy, and therefore financial benefits.
¬ The use of night rate electricity is paid off with the energy savings of only a short period of time.
|
|
Model W152
These electric storage water heaters fit almost anywhere -- under a sink or in a cabinet. If you only need hot water at one location, a conventional water heating installation can be quite costly. You need space for a bulky water heater and its required plumbing -- including two long pipe runs for hot and cold water. And you waste money every time you have to run the water until it reaches the desired temperature.
An InSinkErator® compact water heater is a much better solution. It efficiently heats water at the point-of-use, so there's no wait and no waste. And it can be installed anywhere you have a standard electrical outlet.
You'll find that for restrooms, wet bars, food serving areas, offices and service stations -- virtually anywhere hot water is called for -- an In-Sink-Erator compact water heater quickly becomes indispensable.
|
|
Description
- Twice-positional Installation (except SI 10/ SI 30)
- Enamelled Boiler
- Isolation of high density
- Shield Resistance monotonous tension
- Interior Thermostat to adjust until 75º C
- Anode of Magnesium
- Functioning Pilot
- Security Valve and retention
- External regulation at model SI 10
Dimensions
a.500mm b.398mm - a.468mm b.275mm c.173mm - a.570mm b.365mm c.185mm - a.775mm b.565mm c.190mm - a.935mm b.715mm c.200mm - a.1305mm b.1065mm c.220mm - a.1505mm b.1050mm c.435mm
|
|
Sussman SVW Hot Water Boilers provide safe versatile and easy-to-use heat sources producing hot water for:
-Industrial Process Heating
-Industrial/Commercial Standby Heating
-Comfort Heating
-Supplementary Heating
-Heat Pump Auxiliary Heating
-Freeze Protection
-Hot Water Supply
Sussman SVW Hot Water Boilers are engineered to perform as an efficient energy management program for hot water heating systems and offer these excellent benefits:
-Reduced Installation Costs
-No Fuel Delivery/Storage Problems
-Low Maintenance
-Years of Trouble-Free Operation
-Delivered Factory Tested, Ready to Use
|
|
Aestetic, compact new design (height 255 mm width 190 mm)
7000 W capacity (3000-4000-7000W)
Net weight 2 kg
3 stages power control
3 different safety systems
Thermal cut out (self reset) 85+5C
|
|
These heaters are eminently suitable for facilities where an instant need for a small quantity of hot water may arise, such as in kitchens, guest rooms, washrooms and workshops. The water is heated at the point where it is needed, therefore conduit pipes are short, and thermal losses are low.
The heaters are manufactured with dimensions that make them suitable for mounting inside fitted upper cabinets or lower cupboards. The tank is manufactured from hygienically impeccable plastic material (polypropylene).
|
|
Convenient for every house by its 3 different capacity ( 50 lt, 65 lt, 80 lt) option.
There are standart / lux / digital alternatives of prismatic model.
Has very high corrosion resistance due to enameling treatment with titanium addition, applied to water reservoir.
Ensures high energy saving by means of mono-bloc polyurethane isolation of 3 cm thickness.
Has long life due to its magnesium anode with high potential in compliance with DIN norms. Perfectly safe against negative electro-chemical effects that may come out at operational conditions.
Ensures operation without problem by means of its newly designed heaters working without any problem at different consumption water conditions and its electrical components having international VDE certificate.
|
|
Gorenje has upgraded its heaters with electronic regulation for more demanding customers. Electronic regulation simplifies handling and provides a clear display of the heating element’s status and the desired temperature in the tank. These heaters are thus ranked among the most economical and user friendly devices on the European market.
The OGB EL heater is characterised by the superb technical design of its heating elements. An air heating element is inserted into a protective metallic tube within the heating flange. The tank as well as the protective tube is enamelled against corrosion. It allows for the maximum degree of protection of the enamelled surface by a magnesium anode, reduces sedimentation and facilitates maintenance. The OGB EL heater is equipped with an accurate, intelligible and easy-to-use electronic regulator, which assures optimal energy consumption.
|
|
The TG heater has been developed as a result of demand from a number of markets for a low-priced high-quality water heater. It is intended for the supply of a single outlet or for the central supply of hot water to numerous outlets from a single heater.
Due to its smaller external diameter, it is suitable for apartments as well as other smaller premises. It is intended exclusively for vertical wall mounting.
With an appropriate mixer tap, it can also be used in a non-pressurised system.
The new design of the heating flange with a larger opening facilitates cleaning and maintenance.
|
|
The GBK water heater is equipped with an additional heat exchanger and is intended exclusively for vertical wall mounting.
It is eminently suitable for use in family homes, where during the winter season, it may be operated in conjunction with the central heating system, while in summertime, this heater can be connected to a solar collector system. During central or solar heating, the water can be additionally heated by an electrical heating element, while during non-activity, the water can be heated by an electrical heating element.
An air-heating element is inserted into a protective metallic tube within the heating flange. It allows for the maximum degree of protection of the enamelled tank surface in combination with a magnesium anode, reduces sedimentation and facilitates maintenance. The GBK heater is intended exclusively for vertical wall mounting.
With an appropriate mixer tap, it can also be used in a non-pressurised system.
|
|
These electric storage water heaters fit almost anywhere -- under a sink or in a cabinet. If you only need hot water at one location, a conventional water heating installation can be quite costly. You need space for a bulky water heater and its required plumbing -- including two long pipe runs for hot and cold water. And you waste money every time you have to run the water until it reaches the desired temperature.
An InSinkErator® compact water heater is a much better solution. It efficiently heats water at the point-of-use, so there's no wait and no waste. And it can be installed anywhere you have a standard electrical outlet.
|
|
Electric boiler rooms SUPERKIT (SK) are mainly used for the semi-instantaneous production of domestic hot water or technical or for the reheating of the collective pools. Built around plate heat exchangers STAINLESS 316 L they guarantee the longevity of the heaters thus protected from scaling and corrosion. The exchanger carefully given according to the application guarantees a heating adapted and controlled better than in direct heating.
Upstream with the exchanger, the primary education circuit is completely equipped (Valve, Surge tank, thermostatic securities adapted, circulator ensuring the flow necessary to an optimal exchange).
Downstream from the exchanger the secondary circuit receives the probe of control of temperature, and according to the bodies or options necessary to the good performance
(Medical Circulator of looping,...)
|
|
TP-200 T (200 liters)
Electric cord
Round external format
Vertical installation
Resistance immersion heater out of copper
Anode Magnesium
Polyurethane insulation without CFC
Internal thermostat
Thermostat of safety
TP-200 T all currents: 230V transformable single-phase current in 230V three-phase or
400V three-phase.
Options: Tripod/Kit of legs of transfer
|
|
|
The Maradja electric radiator combines a cast iron heating element with new technologies (infrared remote control, heating diffuser film) to produce the effect of old-style heating while responding to the modern demands for comfort and design.
|
|
Small capacities but great performances...
concentrates of Atlantic reserved to the professionals.
The Small Visio Capacities are perfect in auxiliary hot-water heater.
Their performances guarantee an immediate comfort with economies with the key.
With them, to install a hot water point far away from the boiler or hot-water heater the main thing is not any more one problem.
|
|
Professional reference of the market, the range of electronic hot-water heater VM ACI Visio integrates the best of Atlantic:
Electronic intelligence (dry anti-heating, simplified electric connection, electronic thermostat of series, innovation Tri Kit...)
System patented ACI, resistance steatite and fixed price breakdown service ACI
More Visio (pilot of good performance of the ACI, differentiated esthetics, Express service Visio Spare parts reserved to the fitters...)
NF Électricité Performance CAT C: the distinctive sign of the hot-water heaters most powerful
|
|
| ... products without information |
| |
Infra-panels are designed to fit between the benches and on the walls in
all Tylö Grand Luxe and Tylö Classic sauna rooms, from the smallest up to size 2025.
Infra-panel 710
Size: 710 x 340 x 96 mm. 290 W.
Infra-panel 925
Size: 925 x 340 x 96 mm. 450 W.
Infra-panel 1070
Size: 1070 x 340 x 96 mm. 560 W.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
