|
|
EPP-36 Maximus water heater is designed for industrial use. It has its application in places where a considerable amount of hot water is needed, e.g. an assembly line.
water temperature modulation from 30°C to 60°C
electronic power modulation depending on the flow of water
starts work at such low flow rate as 2,5 l/min and the minimal pressure of 0,1 MPa
larger heating box and bigger surface of heating elements ensure longer life
|
|
KDH Luksus water heater is suitable for supplying hot water to many taps at home, in a workshop or at a public facility.
power consumption: from 9kW to 24 kW/400 V
starts working the moment you turn the hot water tap on
power selection according to water flow rate
economy selection knob, limiting power consumption
German VDE Institute approval
|
|
EPA Opus water heater is offered in three versions: sink and sink-shower and shower.
power consumption: 6,8 kW, 8,4 kW/230V and 7,0 kW, 8,6 kW/400V 2~
electronic water temperature modulation
flow modulation
IP25 safety class enables assembly inside a shower cabinet
equipped with a shower head which guarantees savings on water and energy up to 50%!
|
|
EPJ 3,5 kW Optimus water heater is designed to use it at sinks. Water heaters EPJ Optimus with power consumption of 4,4 kW and 5,5 kW enable to obtain greater volume of hot water, e.g. in the kitchen..
the most reliable technology using copper in heating elements that ensures durability and resistance to air sac
new designs
fine-stream spray-head guarantees comfortable use and savings on water and energy up to 50%!
|
|
KDE Bonus elektronik water heater is able to supply hot water to several taps in different locations such as a bath, a shower or a sink. By using this water heater you can save even more on energy.
Electronic power adjustment
Reliable copper shielded heating coils
Water temperature modulation from 30°C to 60°C
Can work on already pre-heated water
Thanks to the high quality flow sensor the heater starts work at such a low flow rate as 2,5 l/min and the pressure of 0,1 MPa
Rated power from 9kW to 27kW
Option of priority switch (if the system is run in a conjuction with another high electric power consumption appliance)
Safety cut-out
CE declaration and German VDE Institute certificate confirms the high quality of the water heater.
|
|
EPJ Primus water heater is available in two versions: EJP.P - shower and EJP.P..U - sink-shower version.
* power consumption: 4,4 kW and 5,5 kW/230V
* IP25 safety class enables assembly inside a shower cabinet
* equipped with a shower head which guarantees savings on water and energy up to 50%!
|
|
EPVE Focus elektronik brand new instantaneous water heater offers hot water at a few taps, assures stable temperature despite of flow and pressure changes.
* LCD display
* electronic power modulation
* pressure overheating cut-out
* precise temperature setting (1°C)
|
|
EPO Amicus water heater is a perfect solution if you need hot water in your kitchen or a single sink. It can be also connected to two sinks that are located near to each other (if not used at the same time) and to a sink and a shower (under a condition that you use appropriate fittings: double-stream spray-heads).
power consumption rate: 4 kW, 5 kW and 6 kW/230 V ( or 400 V 2N~)
pressure construction that enables switching to hot water system and switching to any tap
EPO.D type-suitable for fixing it under a sink
EPO.G type- installation with inlet and outlet pipes at the bottom
German VDE Institute approval
|
|
|
Our range of storage non-pressure water heaters is exceptional. The heaters are more than easy to install - only cold water supplies and a simple electric socket needed. It is a perfect device if you need small amounts of hot water at a time, in places like kitchens, toilets, garages.
|
|
|
OSV Slim is a wall-mounted capacity water heater. Slim storage water heater was designed especially for limited space. Thanks to reducing the width to 36 cm only, it occupies much less space than traditional storage water heaters.
|
|
You Plus is the electric hot-water heater walls them to accumulates poured them and reliable. Its boiler is equipped of the exclusive technology of smaltatura to titanium with treatment to 850 °C and of the magnesium anode in order to prevent the corrosion of the same boiler. The vertical and termomisti models are equipped of grip handle for the external regulation of the temperature.
He is available in the abilities 50 - 80 - 100 liters mod. vertical and 80 liters mod. horizontals and 80 - 100 liters mod. termodestri and termosinistri.
|
|
Domestic hot water for showers in large facilities (Hotels, leisure facilities, etc.) is one of the most important services offered to customers, but it is often deficient due to the lack of hot water supply in peak hours and to the excessive energy consumption.
¬ Our method of Hot Water production has been designed to obtain higher efficiency, which results in a greater saving of energy, and therefore financial benefits.
¬ The use of night rate electricity is paid off with the energy savings of only a short period of time.
|
|
Sussman SVW Hot Water Boilers provide safe versatile and easy-to-use heat sources producing hot water for:
-Industrial Process Heating
-Industrial/Commercial Standby Heating
-Comfort Heating
-Supplementary Heating
-Heat Pump Auxiliary Heating
-Freeze Protection
-Hot Water Supply
Sussman SVW Hot Water Boilers are engineered to perform as an efficient energy management program for hot water heating systems and offer these excellent benefits:
-Reduced Installation Costs
-No Fuel Delivery/Storage Problems
-Low Maintenance
-Years of Trouble-Free Operation
-Delivered Factory Tested, Ready to Use
|
|
These heaters are eminently suitable for facilities where an instant need for a small quantity of hot water may arise, such as in kitchens, guest rooms, washrooms and workshops. The water is heated at the point where it is needed, therefore conduit pipes are short, and thermal losses are low.
The heaters are manufactured with dimensions that make them suitable for mounting inside fitted upper cabinets or lower cupboards. The tank is manufactured from hygienically impeccable plastic material (polypropylene).
|
|
AISI 316 L STAINLESS STEEL STORAGE WATER HEATER WITH CONTINOUS FLOW
Floor standing B70 T SERIES storage water heaters are installed under the wall-mounted boiler and occupy a very small place.
Thanks to the thermostat it is possible to supply domestic hot water with continuous flow directly from the boiler.
|
|
When it comes to providing hot water to whole apartment blocks from a central supply point, AEG upright storage heaters are the ideal choice. They offer fully automatic operation in dual circuit mode, have perfect thermal insulation, and with a storage volume of between 200 and 400 litres they suit all demands for hot water.
|
|
A higher hot water supply , which allows the supply of hot water in various situations, such as the opening of new taps.
The quick supply of domestic hot water: hot water comes directly from the tap and is always available.
The supply of hot water is guaranteed even in winter and in mountain areas, with very cold inlet water
|
|
These electric storage water heaters fit almost anywhere -- under a sink or in a cabinet. If you only need hot water at one location, a conventional water heating installation can be quite costly. You need space for a bulky water heater and its required plumbing -- including two long pipe runs for hot and cold water. And you waste money every time you have to run the water until it reaches the desired temperature.
An InSinkErator® compact water heater is a much better solution. It efficiently heats water at the point-of-use, so there's no wait and no waste. And it can be installed anywhere you have a standard electrical outlet.
|
|
One hot water storage heater, six operating modes. That's how flexible the new DEM C wall-mounted storage heaters from AEG really are. Whether of an open (vented) or closed (unvented) design, in single circuit, dual circuit or boiler mode - in terms both of connection and performance the DEM C series is entirely made to suit your individual circumstances. One hot water storage heater, six operating modes. That's how flexible the new DEM C wall-mounted storage heaters from AEG really are. Whether of an open (vented) or closed (unvented) design, in single circuit, dual circuit or boiler mode - in terms both of connection and performance the DEM C series is entirely made to suit your individual circumstances.
|
|
Gorenje has upgraded its heaters with electronic regulation for more demanding customers. Electronic regulation simplifies handling and provides a clear display of the heating element’s status and the desired temperature in the tank. These heaters are thus ranked among the most economical and user friendly devices on the European market.
The OGB EL heater is characterised by the superb technical design of its heating elements. An air heating element is inserted into a protective metallic tube within the heating flange. The tank as well as the protective tube is enamelled against corrosion. It allows for the maximum degree of protection of the enamelled surface by a magnesium anode, reduces sedimentation and facilitates maintenance. The OGB EL heater is equipped with an accurate, intelligible and easy-to-use electronic regulator, which assures optimal energy consumption.
|
|
The TG heater has been developed as a result of demand from a number of markets for a low-priced high-quality water heater. It is intended for the supply of a single outlet or for the central supply of hot water to numerous outlets from a single heater.
Due to its smaller external diameter, it is suitable for apartments as well as other smaller premises. It is intended exclusively for vertical wall mounting.
With an appropriate mixer tap, it can also be used in a non-pressurised system.
The new design of the heating flange with a larger opening facilitates cleaning and maintenance.
|
|
The GBK water heater is equipped with an additional heat exchanger and is intended exclusively for vertical wall mounting.
It is eminently suitable for use in family homes, where during the winter season, it may be operated in conjunction with the central heating system, while in summertime, this heater can be connected to a solar collector system. During central or solar heating, the water can be additionally heated by an electrical heating element, while during non-activity, the water can be heated by an electrical heating element.
An air-heating element is inserted into a protective metallic tube within the heating flange. It allows for the maximum degree of protection of the enamelled tank surface in combination with a magnesium anode, reduces sedimentation and facilitates maintenance. The GBK heater is intended exclusively for vertical wall mounting.
With an appropriate mixer tap, it can also be used in a non-pressurised system.
|
|
Description
- Twice-positional Installation (except SI 10/ SI 30)
- Enamelled Boiler
- Isolation of high density
- Shield Resistance monotonous tension
- Interior Thermostat to adjust until 75º C
- Anode of Magnesium
- Functioning Pilot
- Security Valve and retention
- External regulation at model SI 10
Dimensions
a.500mm b.398mm - a.468mm b.275mm c.173mm - a.570mm b.365mm c.185mm - a.775mm b.565mm c.190mm - a.935mm b.715mm c.200mm - a.1305mm b.1065mm c.220mm - a.1505mm b.1050mm c.435mm
|
|
Small capacities but great performances...
concentrates of Atlantic reserved to the professionals.
The Small Visio Capacities are perfect in auxiliary hot-water heater.
Their performances guarantee an immediate comfort with economies with the key.
With them, to install a hot water point far away from the boiler or hot-water heater the main thing is not any more one problem.
|
|
Professional reference of the market, the range of electronic hot-water heater VM ACI Visio integrates the best of Atlantic:
Electronic intelligence (dry anti-heating, simplified electric connection, electronic thermostat of series, innovation Tri Kit...)
System patented ACI, resistance steatite and fixed price breakdown service ACI
More Visio (pilot of good performance of the ACI, differentiated esthetics, Express service Visio Spare parts reserved to the fitters...)
NF Électricité Performance CAT C: the distinctive sign of the hot-water heaters most powerful
|
|
TP-200 T (200 liters)
Electric cord
Round external format
Vertical installation
Resistance immersion heater out of copper
Anode Magnesium
Polyurethane insulation without CFC
Internal thermostat
Thermostat of safety
TP-200 T all currents: 230V transformable single-phase current in 230V three-phase or
400V three-phase.
Options: Tripod/Kit of legs of transfer
|
|
Since the selection of materials until the packing of the products, these water-heaters are manufactured according to the most modern processes and undergo a battery of test which ensure an exceptional output and a reliability to them. These water-heaters of a greater capacity, namely from 200 to 300 liters, offer warm water to profusion for the large-scale consumers. They are posed imperatively on the ground or in a wall cupboard, one tightens, a storeroom or a wash-house.
Installation
Hydraulic connection
3/4 " (20x27) for the apparatuses from 200 to 300 L.
The water-heaters must imperatively be installed with a group of security in conformity with standard NF D 36-401.
If the water supply is with a pressure higher than 5 bars, a pressure regulator must be assembled upstream group of security.
Electric connection
Electric connection must be carried out by rigid driver in a fixed drain in accordance with standard NF C 15-100. Earthing is obligatory.
Fixing
The ground intended to receive the hot-water heater must be carefully checked before carrying out sufficient sealing (mini Ø 12 mm) to support the load of the hot-water heater which represents approximately the double of its capacity.
|
|
BGV, balloon ECS suction cup
CHARACTERISTICS
Balloon medical Gas warm water of tertiary, domestic and industrial use, with suction cup, from 253 to 309 liters
Tertiary range ground
Ferment thermovitrifiée
2 or 4 magnesium anodes according to the model
Sheet jacket (MO)
Insulation foams polyurethane 50 mm (without CFC)
2 inspection doors (Ø 130 mm)
Atmospheric burner with stainless steel slope
Electronic ignition and intermittent night light
Pallet fixes out of steel high-gauge
Articulated column including/understanding 4 aquastats: antifreeze, regulation, overheating and safety
Drain large diameter (1 "1/2) allowing a facility of cleaning
Valve of safety of 7 bars (included)
Connection and emptying device to a loop of circulation (included)
Regulated out of Natural gas with small pocket of transformation for Butane/Propane
Evacuation (maximum length = 7 meters)
- Model with horizontal concentric suction cup for mural exit
- Model with vertical concentric suction cup for exit roof
Kit mural suction cup (standard), or roof (to specify with the order)
Guarantee: 3 years on the tank, 1 year on the parts.
|
|
Since the selection of materials until the packing of the products, these water-heaters are manufactured according to the most modern processes and undergo a battery of test which ensure an exceptional output and a reliability to them. The water-heaters of the ranges Compact and Standard are fixed vertically at the wall.
The Compact range proposes immersion heaters of a capacity from 15 to 30 liters for the second distant drawing up. The water-heaters of 15 liters, available in two models, can be fixed above or below the sink.
The Standard range with water-heaters of a capacity from 50 to 200 liters proposes for each apparatus two specimens which differ by their resistances. The choice of resistance used must be done according to the nature of the water of the area. To equal effectiveness, a resistance steatite is adapted better to water limestones than a standard resistance immersion heater.
Installation
Hydraulic connection
1/2 " (15x21) for the apparatuses from 15 to 50 L.
3/4 " (20x27) for the apparatuses from 75 to 200 L.
The water-heaters must imperatively be installed with a group of security in conformity with standard NF D 36-401.
If the water supply is with a pressure higher than 5 bars, a pressure regulator must be assembled upstream group of security.
Electric connection
Electric connection must be carried out by rigid driver in a fixed drain in accordance with standard NF C 15-100. Earthing is obligatory.
Fixing
The wall intended to receive the hot-water heater must be carefully checked before carrying out sufficient sealing (mini Ø 12 mm) to support
|
|
CHARACTERISTICS
From 50 to 200 liters, a range of water-heater of compactness. They
fix imperatively at the wall, a tripod of support which can be added according to
type of partition.
Ferment out of vitrified steel assembled by automat of welding guarantees of a perfect and durable sealing.
The oversize magnesium anode reinforces the anti-corrosive protection of the unit.
Mono 230 V or all currents
Ferment guarantee 5 years, guaranteed parts 1 year
|
|
|
|
