|
|
Fast, Safe, Self Repairing for Cold Storage
Albany Door Systems' self repairing UltraCool™ door is designed for high traffic cold storage applications where the need for speed is paramount. It was designed specifically for high traffic, heavy duty cooler facilities.
When fork-truck traffic is high, door speed is important and safety concerns are at a premium, UltraCool™ is the door solution.
|
|
Low Profile, Fast, Self Repairing for Openings with Limited Space
Albany Door Systems' self-repairing and low profile UltraLite™ high speed door is ideally suited for industrial and commercial applications where traffic conditions are moderate and space is at a premium. The door can be applied in either interior or exterior applications where moderate wind and/or negative pressure are a problem.
Albany's UltraLite™ is designed to last. It is fast, safe, low cost to maintain, can take a hit and engineered to cycle hundreds of thousands of times.
|
|
Durable, Fast, Climate Control for Cold Storage Freezer Use
Albany Door Systems' self-repairing UltraFreeze™ high speed door is designed for high traffic cold storage freezer applications where the need for speed is paramount. When fork-truck traffic is high, door speed is important, climate control is critical and safety concerns are at a premium, Albany's UltraFreeze™ is the solution.
UltraFreeze™ high speed cold storage doors are tough, built to last and engineered to cycle hundreds of thousands of times.
|
|
Fast, Safe, and Wind Resistant for Rugged Applications
Albany Door Systems' UltraTough M&I Re-Coil-Away, "The World's Toughest High Speed Rubber Door", provides dependable performance in the most rugged industrial applications. The heavy duty side frames, thick rubber curtain and patented windlok design form a near airtight seal and can resist extreme wind pressures.
The UltraTough M&I is designed to last. It is durable, safe, low cost to maintain and can take a hit.
|
|
EFA-SRT-EC High-Speed Roll-up Door for wet and hygienic environment
The EFAFLEX “Easy Clean” (EC) series is well suited for all kind of internal transits in foodsupplying enterprises. The elastic curtain fully complies with the HACCP and FDA requirements. Of course, the whole door construction is built of stainless steel.
All critical door sections are well accessible for cleaning purposes. Because of its space-saving construction the EFA-SRT-EC High-Speed Roll-up Door can be mounted even under cramped construction conditions.
|
|
EFA-SST-ISO High-Speed Spiral-Door - Perfect insulation
The EFA-SST-ISO is the ideal closure door for highly used openings, e.g. in controlled temperature logistics, in refrigerated areas or in conventional industrial constructions, if an efficient insulation is required. A speed of up to 1.5 m/s and a basicly wear free door panel qualify the EFA-SST-ISO as a professional single door solution. The construction is designed for at least 150,000 operations per year - highest availability at lowest maintenance expenditure guaranteed.
EFA-SST-ISO High-Speed Spiral-Door - Perfect insulation
With the development of fast acting insulation doors EFAFLEX is going into a complete new direction. Two door technologies have been combined into a single, innovative system solution: The SST-ISO-K is based on the multiply patented rapid spiral door. Equipped with a highly insulated door blade made of thermally separated slats, a K-factor of at least 0.5 W/m²K is achieved. The caulkings employed prevent from unwanted and uneconomic air and temperature changes. The result is constant climatic conditions.
|
|
The EFA-STR High-Speed Roll-Up Turbo Door opens a new dimension in door construction: with opening speeds of over 3.6 m/sec the EFA-STR is the worldwide fastest door system of its type.
NEW: The Active Crash System EFA-ACS with its electronically monitored, fully automatic return system represents an accessory for EFA-STR doors which is highly recommended:
For the first time flexible and differing coloured door panels have been combined with the spiral formed door panel accommodation. The individual curtain components accommodated in the patented spiral are held away from each other, so that a contactless and practically wear free travel is guaranteed. Even sight sections remain fully transparent for many years. Further the door panel is made of individual, rapid and simply replaced segment-modules. Excellent wind stability, secure sealing and smooth travel also provide for exceptional availability.
NEW: STR Active Crash System ACS with direct-synchronous-drive
The innovative direct-synchronous-drive (DS)gives a virtually wear-free drive with smoothest running. The drive is now attached directly "to the top of the door blade" by a drive shaft and synchronously arranged telescopic extension arms connecting on the top lath of the door blade. This reduces the wear on power transmission parts considerably. At the same time we could substantially improve the safety level for uncontrolled descent of doors. Furthermore we achieved a considerably longer operating life of important components, because amongst others the blue belt has been replaced by a flyer chain and in particular the stress of the springs could be reduced, too.
|
|
RapidRoll® 230 High Performance Industrial Door
The RapidRoll® 230 is a super-fast, low maintenance door ideal for interior or exterior applications. Opening speeds of 60" per second make it well suited for high-traffic, high-cycle operation. Breakaway bottom beam resets in minutes while minimizing door damage. Exclusive RollTex® fabric door panel is chemical, weather and puncture resistant. Durable and versatile, the RapidRoll® 230 can handle the toughest environments.
|
|
AS High-speed Folding Door - the reliable external door
Aluminium high-speed folding doors from EFAFLEX are mainly used as external doors for the closing of work bays. EFA-SFT doors offer you absolute reliability in every respect. Patented design features such as modular construction or cardan link techniques represent innovative door technology in detail.
Max. Size: Width 8000 mm x height 6000 mm
|
|
RapidRoll® 3000 High Performance Industrial Door
The RapidRoll® 3000 is the fastest high speed rolling metal door on the market. This reliable exterior door enhances security while increasing operational savings. Patented DiscDrive technology reduces wear, vibration and noise during operation. Features durable double walled anodized aluminum slats. Optional slat configurations include windows, ventilated, or insulated. Patented Contactless Safety Edge® detects objects anywhere in the door path and reverses the curtain before contact.
|
|
The Crawford 1200 High speed door is designed for medium sized inside door openings with wind loads up to 11 m/s and where high visibility is required. The door leaf of Crawford 1200 High speed door is made of 1.5 mm thick PVC which is fully transparent except for the warning stripes made of reinforced vinyl. The transparency provides excellent visibility, contributing to a safe working environment. The door leaf has integrated aluminum ribs, giving resistance to air pressure and moderate wind forces. All panels are replaceable.
|
|
The Crawford 855 high speed door offers new opportunities to increase safety in the material flow process. By adapting the opening and closing speed to individual needs, energy costs can be reduced and working environment improved.There are several upgrading possibilities as needs change.
|
|
Industrial flexible doors - SECTOR
A marriage of total rationality and practicality.
Frequent coming and going of handling vehicles requires the use of rapidly opening and closing doors that are compact and suitable for intensive use.
Sector rapid roll-up doors not only meet these requirements but also have a completely clad structure that houses the motorisation and the control, safety and balancing systems.
Apart from their attractive price, Sector doors have great structural flexibility because the transparent and coloured sectors can be interchanged.
|
|
REVOLUTIONARY: COMPLETELY NEW SPIRAL DOOR GENERATION
Permanently increasing energy costs require a moderate and economical handling of the valuable raw materials. The use of high - speed doors basically previously led to saving energy, the heat insulation of the doors used however often was neglected.
Therefore as the first and only producer in the world, EFAFLEX will as of immediately offer double walled insulation laths in thermally separated and insulated models for exterior high - speed doors now in serial production.
Especially in the times between uses of a high - speed door, this measure ensures that it will again extensively reduce the unwelcome loss of heat. According to DIN EN 13241-1, for the first time a steadily built-in door has.....
The circular, continuous round spiral is the standard solution. Herein, the door blade is coiled up free of abrasion in a patented circular spiral above max. headroom. This guarantees a smooth and calm run and, moreover, preserves the brandnew appearance of the door over many years!
If the allowed freespace for the header is not sufficient, oval designs will be used. For highly limited space, a low header application is available.
The engineers at EFAFLEX have had a true stroke of genius together with the introduction of an active crash system (EFA-ACS) for solid (!) door blades. If desired, the new EFA-SST generation with the model EFA-ACS-DS can be provided with a double sided moving device for the lower door blade area.
NEW: The EFA-SST Premium is now available at extra width known as the XL model.
|
|
SRT High-Speed Roll-up Door - economic and efficient
EFAFLEX High-speed roller doors are offered in many different versions, providing individual and customized system solutions for nearly every application requirements. All EFAFLEX high-speed roller doors are produced in a largely maintenance free modular construction.
Max. Size: Width 6000 mm x height 6000 mm
|
|
Industrial flexible doors - SECTOR
A marriage of total rationality and practicality.
Frequent coming and going of handling vehicles requires the use of rapidly opening and closing doors that are compact and suitable for intensive use.
Sector rapid roll-up doors not only meet these requirements but also have a completely clad structure that houses the motorisation and the control, safety and balancing systems.
Apart from their attractive price, Sector doors have great structural flexibility because the transparent and coloured sectors can be interchanged.
|
|
The professional clean room appliance
By its compact and self-contained seamless construction in stainless steel (V2A) the EFA-SRT-CR (Clean Room)is best positioned for the use in clean room areas and air locks. This door has been designed to meet the high standards for clean rooms and is the ideal solution for separating rooms with a pressure gradient. In contrast to conventional doors this appliance has an extreme narrow and dense side guidance of the curtain which results in very low air leakage of less than 60 m3/h at 30 Pa delta air pressure.
|
|
High-speed turbo-door is the term used for a globally unique high-speed door for indoor applications, the door leaf of which is made of single-wall slats which are permanently transparent. On request the door leaf can be supplied PVC-free and as such is best suited for applications in the automotive industry (painting stations), in chemical and pharmaceutical plants as well as all sectors of the food-processing industry. The high-speed turbo-door EFA-STT is up to 3 m/sec. fast. It stays tight even under overpressure and underpressure conditions. Even under strong wind loads, the door remains fully operational.
The door leaf consists of individual single-wall slats which - each separately - are bolted to strap hinges on both sides so that no force acts within the hanging. The vertical hoisting motion is introduced directly via the strap hinges. The door leaf is taken up in a patented round spiral above the door opening - contactless and virtually wear-free. As a consequence, the door leaf can see years of wear without losing its appearance, and door travel is especially quiet.
STT - High-Speed Turbo-Door - the quantum leap
The High-speed Turbo-door is the only worldwide internal High-speed-door with a door-blade made of single-walled transparent plastic-laths , that will remain completely transparent in the long run.
Max. Size: Width 8000 mm x height 7800 mm
Just recently announced, the transparent high speed door from EFAFLEX
has been released in a model with active crash system (EFA-ACS) which
enables the door to repair “itself” after a collision, within a very short period of time.
|
|
RapidRoll® 392 High Performance Industrial Door
Ideal for manufacturing and warehousing facilitates, the RapidRoll® 392 features superior wind resistance for large interior and exterior applications. Custom configured for openings as large as 256 square feet. Opening and closing speeds up to 32" per second save energy costs within temperature-controlled environments. The bottom beam breaks free on impact minimizing door damage and can be reset within minutes.
|
|
For Normal Traffic-Flow Situations: light, friendly and safe
A heavy-duty version with 4mm thick, fully transparent curtain ensuring safe transport routes and good visual contact from afar.
Use
Internal/ external door
Door Size
Width (LB) max. 6000mm
Height (LH) max. 5000mm
Speed - inversion relay/ frequency converter controls
Opening 0.8/1.5 m/s
Closing 0.8/0.8 m/s
Curtain Thinkness
Fully Transparent 4.0mm
Fabric Curtain with Vision Panel
Doors Over 5000mm 3.0mm
Inversion Relay Controls
Frequency converter controls on request
Options
Emergency opening via emergency hand chain
Operator/ shaft cladding
Stainless Steel Version
Wind Locks
|
|
Reliable and with a long service life
These are the benefits of the Hörmann KSE steel folding door. That's why it is always a popular choice for frequently used halls that do not require heating, e.g. machine halls, vehicle depots, agricultural buildings and similar facilities. The galvanized material with high-grade power-coating makes the door highly weather-proof.
As standard, the KSE steel door is supplied inside and outside in the colour Traffic White, based on RAL 9016. Optional: choice of RAL colour on request.
The door leaves comprise rectangular hollow section profiles to all four sides. Overall thickness 55 mm, elevation view 70 mm.
The Hörmann KSE steel folding door is available in 3 to 12-leaf versions with various folding arrangements and opening angles of 90° and 180°.
The optional wicket door (with threshold) does away with the need for a side access door.
The door is manually operated
|
|
Supple folding system for cold room
EN 13241-1 safety Standard - EC
Self supporting mill galvanised steel frame with polyester powder coated finish - No welding
Option Frame : stainless steel 304 L - Stainless steel 316 L
Heating system with airtight, watertight, dustproof silicone cables in a tube spreading heat
Peripheral isolating foam between structure and wall
Double fabric including thermo-reflective aluminium films in between which are caught air bubbles and isolating cushion
Curtain with composite strengthening tubes and seamless safety straps
Special low temperature oil - stainless steel brake -
Opening: 1 m/s - closing: 0.5 m/s
Maximum clear opening dimensions in mm : W 4000 x H 4000
|
|
A World-first:Non-contact roll-up technology saves wear on the shutter curtain and retains the aesthetics
This quick roll-up technology is based on a newly developed section chain. Thanks to the special shape of the shutter sections, a distance is created which allows the sections to roll up without touching each other in any way.
Where there is no contact, there can also be no friction, saving wear on the shutter curtain as a result. In addition, flexible sound-absorbing elements on the sections and plastic rollers help to considerably reduce the noises otherwise associated with the opening and closing of shutters.
Glazing
Partially-glazed sections featuring acrylic panes for light conditions and visual contact to requirements. The number and width of the windows are adjusted to the size of the shutter.
Shutter speed
Opening: max. approx. 2.0 m/sec.
Closing: approx. 0.5 m/sec.
Acoustic rating
Airborne noise (acoustic rating) to DIN EN ISO 140-3 R'v,w, B = approx. 27dB
Size range
Width up to 5000 mm, Height up to 5000 mm
|
|
High speed door for inside application
Food industry
- Automatic roll-up doors
- NF P 25-362 safety Standard - EC
- Self supporting mill galvanised steel frame with polyester powder coated finish - No welding - Option : stainless steel frame
- Structure with Flexible track - Patent
- Unique Flexible track for Break-a-way Curtain with Automatic Reinsertion -System without human intervention
- Soft bottom edge technology -no more trouble with rigid bottom edge electronics
- No dismantling needed for cleaning
- Cleaning of the tumble without any handling
- High impermeability thanks to seal between tumble and transom
- Transmitter-receiver photocells
- Speed : 1m/s up - 0.5 m/s close
- Maximum clear opening dimensions in mm : W 3500 x H 3500
|
|
High speed door for cleanroom
Cleanroom - pharmaceuticals applications
- Roll-up door
- Trafficontrol system 2 : automatic reinsertion
- Door with a perfect sealing all around the door
- Test made by The CSTB
- All the door can be easily reached for cleanning
- The door frame contains no gaps
|
|
The twin skinned high-speed door for safe and smooth through-traffic! Irrespectively of whether used for indoor or outdoor purposes, for new buildings or for renovations - the NOVOSPRINT has been tried and tested for more than 15 years in practical applications.
Two driven door leaves halve the opening time (it opens at 2 m/s)! The short opening and closing times reduce heat exchange and dangerous draughts in the immediate vicinity of the door to a minimum. Reduced energy costs and a low sickness rate are the result. You can see that the savings potential is enormous!
|
|
System with flexible folding up
EN standard 13241-1
Self-supporting structure multiplis
without galvanized steel welding covered paint polyester powders
Flexible slides which guide the apron (patented System)
The space released between slide facilitates the unfolding of the apron in the event of obstacle to the descent: no the blocking nor of formation of loop around the drum, causes frequent breakdown.
No amounts out of sheet deteriorated by the trolleys preventing the operation of the door
Resistance of the slides to traction 4 tons. Exits of the technology of the safety belts in the car.
Silence of operation: the slide deadens the noises of beat of the curtain in the event of depression or wind.
Luminous curtain of security from 0 to 2500 mm - System SAFLINE
Sécuripass system: Flexible edge of closing
Flexible strap out of half-compass passes
Resistance to winds of 100 km/h
Wardrobe Integrated into the amount
Option Raising of warm standby per counterweight integrated into the amount
Sécurisangle system: 2 straps of raising of the normal apron not solicited in step ( Three-phase current supply + ground
Dimensions max in mm: L 6000 X H 6000
|
|
The product line covers doors of the dimension of 1.200 x 2.000 mm for an emergency fire brigade door to folding doors in immense dimension for hangars. It seems that there are no appliction limits for this special door. The opening speeds differ from 3.5 sec. to 12 sec. in the self-carrying execution. The folding door is available in single sheet or insulated double sheet version, as well as in total glazing or as a safety door in bulletproof and burgalarproof execution. This door can be used as fire brigade alarm door, as a cargo door in airports, as a door in incinerating plants or just as an industrial door. The oldest of these doors built by our company have been in function for more than 35 years without any complaints by our customer. In this context we have to mention the automobile industry where extremely short production times have to be combined with speed and extremely solid and robust kind of door.
|
|
|
Integrated in an automatic production line, our industrial lifts can be equipped with swift doors and roller conveyors and driven by an automaton to provide continuous level change operations.
|
|
|
