|
|
|
|
|
|
MAXIRIS III, 3rd GENERATION INFRARED BARRIER
Expert experience and Technology at your service. SORHEA has developed a new aesthetically pleasing and robust design for the MAXIRIS III Columns.
With a self-supporting column that is fixed to a floor socket it is possible to have a single or double-faced column. This unique system inceases the number of possible configurations in direction and in number of beams (up to 18).
The MAXIRIS III design is especially pleasing thanks to a complete top to bottom Housing to cover all screws and cables.
Identification card:
- Zoning option (according to the configuration): up to 3 zones per barrier, size of the zones is configurable.
- Celles more performing in poor visibility conditions.
- Beams multiplexed and synchronised.
- Integrated alignment assistance.
- Memory storage: 200 events.
- Alarm configurable for the cutting of 1, 2 ou 3 beams.
- Configuration of the columns: local or at distance.
- Relay contacts on ervery column.
The modularity and flexibility in the use of the MAXIRIS III infrared columns allows them to be installed on the majority of sites:
- Military facilities
- Nuclear power plants
- Prisons
- Logistic sites
- Public places (underground, airports...)
- etc.
|
|
|
|
|
|
With D.I.S. technology(*) 100Hz (Double Interlaced Scanning 100Hz), each cell integrates the dual functions of transmitter and receiver. The infrared beams that are created are multiplexed and synchronized at a frequency of 100Hz.
Thanks to this technology, all columns are identical. The idea of separate transmission and reception modules has been surpassed.
The D.I.S.(*) TECHNOLOGY 100HZ IS INNOVATION THAT SORHEA HAS DEVELOPED IN THE QUEST FOR RELIABILITY ! * Patent pending - No. 06 02310
Dual digital AGC enables compensation for variations in the incoming signal to ensure uninterrupted operation of the barrier. This digital processing of the signal is performed based on a time curve that differentiates exterior phenomena (meteorological or others) from intrusion attempts and thereby significantly reduces the number of false alarms.
COLIRIS II has output switches for each column.
This feature permits maximum limitation of wiring constraints.
You choose, with respect to your needs and constraints, where to wire alarm switches, at one end or the other of the infrared barrier.
There are multiple possibilities for wiring and output switches !
|
|
APIRIS is the only triple-technology barrier to combine an infrared barrier with synchronized and multiplexed beams, a microwave barrier and a microwave doppler sensor.
The alarm is triggered when an intrusion is detected by the infrared and by one of the two microwave technologies
APIRIS is an outdoor anti-intrusion system designed for the protection of sensitive sites such as prisons or military sites.
Main APIRIS features:
- 4 to 7 infrared beams spread over the whole column’s height
- Double direction column
- In case of a low visibility, one or more IR beams can be disqualified
- Barrier connection with RS485 Network
- History of the last 100 events
|
|
| ... products without information |
| |
|
|
