|
|
Surface mount stainless steel keypad
- Completely sealed (filled with epoxy)
- Remote controller mounted in a weather resistant plastic box
- Programming password protected
- Capacity 100 user code of 4 to 5 digits
- 1 form C output (optional: 2 to 3 relay outputs)
- Keypad Illumination duration programmable
- Audible feedback for operating and programming
- Request-to-exit input
- Timed output 1 to 99 seconds or latched
- All programming stored in non-volatile EEPROM memory
- Operating voltage: 12 to 24V AC and 12 to 48V DC
- Consumption (3 relay outputs activated and keypad illuminated):
. 12V AC: Standby 90mA
. 24V AC: Standby 46mA
. 12V DC: Standby 100mA
. 24V DC: Standby 55mA
. 48V DC: Standby 30mA |
|
- Surface mount stainless steel keypad
- Completely sealed (filled with epoxy)
- Remote controller mounted in a weather resistant plastic box
- Programming password protected
- Capacity 100 user code of 4 to 5 digits
- 2 form C outputs
- Keypad Illumination duration programmable
- Audible feedback for operating and programming
- 2 LED's for visual feedback
- Request-to-exit input
- Timed output 1 to 99 seconds or latched
- All programming stored in non-volatile EEPROM memory
- Varnish coated PCB (protection against high levels of humidity)
- Operating voltage: 12V to 24V AC and 12V to 48V DC
- Consumption (when 3 relay outputs activated
and keypad illuminated):
. 12 V AC: Standby 90mA
. 24 V AC: Standby 46mA
. 12 V DC: Standby 100mA
. 24 V DC: Standby 55mA
. 48 V DC: Standby 30mA |
|
- Surface mount stainless steel keypad
- Completely sealed (filled with epoxy)
- Programming Password protected
- Capacity 100 user codes of 4 to 6 digits
- 2 form C outputs
- Keypad Illumination duration programmable
- Audible feedback for operating and programming
- Timed output 1 to 99 seconds or latched
- All programming stored in non-volatile EEPROM memory
- Request-to-exit input
- Push button (KCIEN version only)
- Tamper Switch
- Operating voltage: 12V to 24V AC and 12V to 48V DC
- Consumption:
. 12V AC: Standby 20mA, when all 2 relay outputs activated
100mA max
. 24V AC: Standby 10mA, when all 2 relay outputs activated
50mA max |
|
- Surface mount stainless steel keypad
- Completely sealed (filled with epoxy)
- Programming Password protected
- Capacity 100 user codes of 4 to 6 digits
- 2 form C outputs
- Keypad Illumination duration programmable
- Audible feedback for operating and programming
- Timed output 1 to 99 seconds or latched
- All programming stored in non-volatile EEPROM memory
- 2 LED's for visual feedback
- Request-to-exit input
- Push button for request-to-enter
- Tamper Switch
- Operating voltage: 12V to 24V AC and 12V to 48V DC
- Consumption:
. 12V AC: Standby 20mA,
when 2 relay outputs activated 100mA max
. 24V AC: Standby 10mA,
when 2 relay outputs activated 50mA max |
|
- Aluminium keypad
- Corrosion resistant flush casing
- Programming Password protected
- Capacity 100 user codes of 4 to 6 digits
- 1 form C output (optional: 2 or 3 outputs)
- Keypad Illumination duration programmable
- Audible feedback for operating and programming
- Timed output 1 to 99 seconds or latched
- All programming stored in non-volatile EEPROM memory
- Varnish coated PCB (protection against high levels of humidity)
- Audible feedback for operating and programming
- LED's for visual feedback
- Request-to-exit input
- Push button for request-to-enter
- Illuminated push button
- Aluminium or gold finish
- Operating voltage: 12V to 24V AC and 12V to 48V DC
- Consumption:
. 12V AC: Standby 20mA, when 3 relays activated
100mA max
. 24V AC: Standby 10mA, when 3 relays activated
50mA max |
|
- Stainless steel keypad
- Programming Password protected
- Capacity 100 user codes of 4 to 6 digits
- 1 form C output (optional: 2 or 3 outputs)
- Keypad Illumination duration programmable
- Audible feedback for operating and programming
- Timed output 1 to 99 seconds or latched
- All programming stored in non-volatile EEPROM memory
- Varnish coated PCB (protection against high levels of humidity)
- LED's for visual feedback
- Request-to-exit input
- Operating voltage: 12V to 24V AC or 12V to 48V DC
- Consumption:
. 12V AC: Standby 20mA, when 3 relays activated 100mA max
. 24V AC: Standby 10mA,, when 3 relays activated 50mA max |
|
Surface mount stainless steel keypad
- Completely sealed (filled with epoxy)
- Remote controller mounted in a weather resistant plastic box
- Programming password protected
- Capacity 100 user code of 4 to 5 digits
- 1 form C output (optional: 2 to 3 relay outputs)
- Keypad Illumination duration programmable
- Audible feedback for operating and programming
- Request-to-exit input
- Timed output 1 to 99 seconds or latched
- All programming stored in non-volatile EEPROM memory
- Operating voltage: 12 to 24V AC and 12 to 48V DC
- Consumption (3 relay outputs activated and keypad illuminated):
. 12V AC: Standby 90mA
. 24V AC: Standby 46mA
. 12V DC: Standby 100mA
. 24V DC: Standby 55mA
. 48V DC: Standby 30mA |
|
The Model 660 Touchpad Reader is a compact, easyto- install touchpad reader intended for sites which require badgeless entry. This touchpad reader provides sites with an option to traditional badge readers.
Model 660 touchpad reader operation is compatible with all Entry PerfectTM, Secure Perfect®, and Picture PerfectTM access control systems and Micro/5-E, Micro/5-PX and Micro/5-PXN controllers when configured with either a 2RP or 2SRP reader processor. Up to two Model 660s may be connected to each 2RP or 2SRP. |
|
Novomatic code button set
|
|
RTS wireless keypad
Keypad operation for secure access.
2 channel radio keypad - you can control up to 2 applications (gate and garage door).
1 main code and 4 secondary codes for multiple users.
4 to 6 digit security code.
No wiring - battery powered with illuminated keypad |
|
Posts PSD/PSE with access control
Front-door station series with access control free-standing or surface-mount for up to 5 / 20 flats
Selective performance parameters
The PSD/PSE with access control includes all performance parameters of the series PSD/PSE audio area in addition to the following.for up to 89 iKeys / tKeys / tCards in the decentralized running (manual read-in)
for up to 250 iKeys / tKeys / tCards in the decentralized running (software supported)
for up to 1000 iKeys / tKeys / tCards in the centralized running (PC-administration)
potential-free relay contact (closing contact iPSD/iPSE resp. two-way contact tPSD/tPSE: 24 V DC / 2 A)
optical and acoustic acknowledgement when key is read |
|
cPAKL
Codelock for access control with numerical codes
Not only can the cPAKL code lock be installed in their own right for access control purposes, but it is also ideal for supplementing existing PAK door intercom systems, which is the matching front-door station series. With a surface-mounting height of just 16 mm, the cPAKL is designed to be compact. |
|
SELETTO
Built-in push-botton panel, programmable to
control pedestrian and vehicular access, usable
in two operation modalities: with “serial connection”
and with “interface to COMPASS system”. |
|
Access control and identificationProducts based on RFID (Radio-Frequency Identification) technology are some of the fastest-growing for ASSA ABLOY. RFID's benefit is that it enables security monitoring and access control without physical contact.
Customers look to trusted leaders in access control and identification for the solutions they are seeking, with products influenced by IT standards, enhanced security measures built in, and technology expertise for contactless access and transaction applications. |
|
AMX Keypads complement the clean design and distinctive functionality you have come to depend on with our award-winning Touch Panels. Available in multiple models, styles, sizes, color and capabilities, they offer similar levels of control but at a much lower price point.
|
|
RCP07-X
RCP07X wireless push button wall plate controller with 4 scenes, off and master raise and lower
What It Is
A wireless 7 button wall mounted control panel providing 4 scenes plus off and master raise and lower.
The unit provides full scene programming.
Externally powered via a 12V DC power supply rather than the Lithium coin cells used in the RCP07 wall plate controller.
The RCP07 push button wall plate controllers are designed to be mounted anywhere, be it flush mounting to UK back-boxes or simply surface mounted to any flat surface using the patress provided.
RAKOM coded radio transmission eliminates the need for any data cabling to dimmer receiver modules. Cabling is limited to just a 12V DC power supply, ensuring that the system can be installed with minimum fuss and disruption.
Flat metal cover plate accessory kits are available in a variety of standard
finishes including: brushed stainless steel, mirrored stainless steel and
polished brass.
Versions Available:
RCP07WX - White finish, externaly powered
RCP07CX - Charcoal finish, externaly powered
|
|
This compact single-gang keypad for RNET® systems features a five-character display. With Russound Smart sources like the ST2 Series Dual Tuners or the SMS3 Media Server, you can view station or channel, artist, and song title in real time.
Housed in a stylish Decora® design, the UNO-S1 is is available in five popular colors to blend in with virtually any décor. |
|
This award-winning keypad gives you complete control of any RNET® system. The 12-character backlit display shows system and source information in real time. With Russound Smart sources like the ST2 Series Dual Tuners or the SMS3 Media Server, you can view station or channel, artist, and song title on the keypad display.
Available in five decorator colors, the UNO-S2 is at home in every room. |
|
Intelligence in the switch
The controller of environment TX 450 is to some extent an intelligent push rod which makes it possible to send 4 commands via 4 keys and to post 4 information on a screen LCD.
He allows the ordering of lighting, the travelling shutters, the heating... as well as the order of functions evolved/moved like scenarios.
This switch with the design high-tech (format 80 X 80 cm) is available in the white and gray colors silver plated.
Quadruple push rod
The four sides of the product act as push rods (sensitive keys) for launching orders goes/stop, assembled/descent, calls of scenario, etc
The assignment of the keys is freely programmable. Visual symbols can be selected on the bill-poster to clearly identify the order associated with each key.
Bill-poster
He makes it possible to post indications of state in relation to the push rods of the product or according to other products connected to the bus. (ex: state ON/OFF, luminosity delivered by a light-sensitive switch, external interior temperatures, etc)
The data can be posted by symbols to select in an integrated library or by a plaintext. The posted data can also be the result of a logical combination AND/OR several information.
It includes/understands:
a central part allowing 4 lines of posting for 4 information
4 external zones corresponding to the 4 keys to identify the order associated with each key.
|
|
KNX Room Controller
The innovative Room controller display in Flat Design from JUNG provides an elegant, attractive appearance which you will love at first sight. This impression is achieved by its particularly flat design. |
|
| Merten offers you a number of control interfaces which enable convenient operation and provide a clear overview when setting the KNX. The award-winning PLANTEC display and control units are particularly versatile, as is the merten@home control interface. And if you wish to control complex building functions in commercial buildings, the proven B-CON software applications are the obvious choice. |
|
Control and Dispaly Tableau, LCD, Silver
Device with LCD-Display and control buttons for - indication of switching status, fault reports and measurement values, - central switching of electrical consumers - adjustment time programs and light scenes - acoustical alarm signals. |
|
Switch Sensor, 5-fold , IR, Display
Busch triton(R) With window. For Busch Installation Bus(R) EIB/KNX devices 6120 U-10x, 6110 U-10x, 6114 U and Busch Powernet(R) EIB/KNX devices 6920 U-10x, 6931 U-10x, 6932 U-10x, 6933 U. Universal control cover with IR reception and display |
|
Multifunction push-button sensor
With window. For ABB i-bus(R) EIB/KNX devices 6120 U-102, 6110 U-101. 6114 U and ABB Powernet EIB/KNX devices 6920 U-102, 6931 U-101, 6932 U-101, 6933 U. Push switch function: switching / dimming / blind / sending values / scenes etc. Surface painted |
|
ARTICLE CODE
HC4680
CATEGORY
Installation: devices for home and office > My Home: system with house-automation functions for the home
DESCRIPTION
Axolute - Scenarios control - pale
scenario control - to control 4 scenarios - aluminium
TECHNICAL DETAILS
Rated current In 0,009A
Modules N°2
Series My Home
Rated voltage 27V |
|
The SSC-2000 system keyboard is a controller used to manage devices
such as cameras and DVRs through RS-485 communication.
Administration is made easy through user-friendly on-screen menus,
touch screens and a joystick.
- Long-Range Remote Control
: Long-range remote control (up to 1.2Km) is made possible through the use of RS-485 communication (based on 1 system keyboard).
- System can be Controlled Collectively
: The camera (receiver unit) and DVR can be controlled with this system keyboard.
- Multiple system keyboards can be connected.
: The system can be controlled from different locations, and a maximum of 32 units can be connected at the same time.
- Easy to operate
: An LCD is used to show the respective operations of system keyboard; menus can be selected conveniently through a touch-screen; and control is made easy by using a joystick.
* Controllable Product List
: Camera, Receiver (MRX-1000), Standalone DVR (SHR Series), PC Based DVR (SPR Series) |
|
| Cabled keypad controller unit for Carisa PAR56 PowerLED pool lamp. RF remote controller is also available. 9 different mode options are available. |
|
|
|
