|
|
HS 6 Series, THE CHALLENGE OF INNOVATION
To provide their clients with washers with the best washability and offer proprietors the best quality wash, profitability, productivity and a simple and easy form of management. This has been the leitmotif which has led Girbau to develop the 6 series. The HS 6 series washer extractors are high speed and 100% Free Standing, do not require bolting down and reach spin speeds up to 1000 rpm.
They are available in the following capacities: 9kg (HS-6008), 14kg (HS-6013) & 19kg (HS-6017).
|
|
Opposed doors (soiled room / clean room) Heating: Electric, Steam, Gas Extraction: 900 /1000 R/prn
Optional features
Type 316L stainless steel cylinder
Cylinder electropolishing
Stainless steel water valves
Clean room air intake
Liquid supply injection
Water fill and chemical feed control
Indirect steam heating
|
|
Girbau industrial coin control washer-extractors are available with load capacities of 8kg, 13kg & 17kg.
Suitable for coin-op establishments. It has 4 individually modifiable, phase-to-phase programs (up to 6 phases per program). Pay system with coins or tokens. Failure check and alarm messages system. The clock option allows you to program prices according to the time of day and program. Light indicators guide the user step by step until the washing machine starts.
|
|
Solid construction: durable stainless steel drum, tub and cabinet
- Easy for operation and easy programmable EC-microprocessor
- Short washing cycles available (+/- 34 minutes) when connected to a hot water supply, high power
of 9 kW (3 phase)
- The special function button has the possibility to programm one extra funcition :
install the soaking time, to delay the starting of a programme, to wash more economically by
switching off the prewash or set a economic or gentle programm or desactivating the spin sequence.
- High Extraction speed till 1150 rpm. Depending on the programme from 800 up to 1150 rpm
which results in a high G-factor of 300.
- Standard with drain valve, available with pump.
- Available with matching dryer DA9, DAM9 or stacked version DAMS9
- Safety main switch
- Electrical opening of the door, with possible emergency opening
- The washer can be equipped with an external coin meter, connectable to the timer.
|
|
- Soft-mount washer extractor
- Stainless steel top & front panels for highly industrial environments
- Large door opening for easy loading & unloading
- Standard inverter drive, increasing the life span of the machine
- Vital parts easily accessible for service
- Available in Coin & OPL version |
|
- Freestanding or soft-mount washer extractor
- Totally freestanding, enabling installation on any floor and any level
- Stainless steel top & front panels for highly industrial environments
- Large door opening for easy loading & unloading
- Standard inverter drive, increasing the life span of the machine
- Drain valve in front directly under the tub, reducing water consumption
- Self-tensioning poly V-belt, increasing life span
- Option: frontal soap dispenser
- Available in Coin & OPL version |
|
- Capacity 13/17/22/33 lbs
- Free standing (soft mount) -Spin speed 1000 RPM
- Microprocessor control 9 preset cycles and 91 available
- Coin operation available
|
|
6 MS Series, experience and innovation
To provide their clients with washers with the best washability and offer proprietors the best quality wash, profitability, productivity and a simple and easy form of management. This has been the leitmotif which has led Girbau to develop the 6 series.
The 6 MS series, requires bolting down, reach speeds up to 600 rpm and are available in the following capacities: 10kg (MS-610), 13kg (MS-613), 17kg (MS-617) and 23kg (MS-623).
|
|
Girbau industrial washer-extractors HS-4000 series are available with load capacities of 22kg, 40kg, 55kg and 110kg.
With a history endorsed by many years of experience in the market, series 4000 washers are renowned for being heavy-duty, quiet, offering maximum performance and environmentally friendly.
These free standing washers come with a powerful spin speed of more than 300G with the resulting energy savings on drying loads of up to 200kcal/kg linen. The great amount of moisture extracted by the powerful spin also means a significant reduction in drying cycles.
This series also incorporates the Gdrive system which facilitates: optimum processing according to specific linen time, up to six rotation speeds with a single motor, out of balance control, reduction in noise and vibrations, prolonged machine mechanical life and savings on maintenance.
|
|
Premium model in stainless chrome steel with large display, 6.5 kg load capacity and top-of-the-range features.
4 main and 8 special programmes, including hand wash; super finish programme and express wash cycles starting from 24 minutes, 30-95ºC.
Pre-selection of finish time up to 24 hours in advance.
Classification: A+AA
World premiere: dirt sensor
Loading and dosing display
Spin speed: 1500-200 rpm
Direct drive, frictionless
Programming functions
Large multilanguage text display
Drum lighting
Cash card system (optional)
|
|
Capacities 8, 10 and 12 kg
Spin speed 1100 (8080), 1000 (8100) and 800 (8120) rpm.
Maximum care for your laundry:finely perforated fabric-friendly drum, gentle start and sensor controlled multi-stage spinning technology
Top washing results: hydrodynamic flow reversal for the best soaking, drum vanes with integrated scoop system residual moisture
Lower operating costs due to reduced water and electricity consumption
Ergonomic loading: large metal door with 130° opening angle, door handle on right.
ergonomic, clear control panel, easily understandable pictograms.
Programme status, duration and time remaining display
Practical detergent filling: four dispensing containers on the top, low maintenance water flush system
Durable: factory tests indicate a life of 20,000 cycles, frequency rectified drive system
Two water valves: cold and hot water or hard and soft water
5 microprocessor controlled main programmes with short washing times: Hand-wash 20° / Wool 30° / Coloured 40° and 60° / Boil wash 95°
Special programmes: Express programme at all temperatures/Gentle programme / Pre-wash / Intensive / Energy-saving (reduced temperature) / Rinse stop / Reduced spin speed
Wash-Card: Wet-Clean and industry specific special washing programmes
|
|
Models available for 10 kg / 12,5 kg / 15 kg / 20 kg / 25 kg / 30 kg dry washing
Programme variety: 13 standard programmes, 22 special programmes, 50 user specific programmes and 14 wet cleaning programmes form the starting point; flexible programme changes and individual extensions are possible at any time.
User comfort: The graphic display and clear buttons ensure a smooth user experience and delay-free processes in your laundry.
Productivity: The finely perforated washing drum, the high performance asynchronous motor, the short programme times and intelligent functions such as time
Preselect ensure optimum washing results and the highest efficiency.
Durability: Under the SWISS MADE quality stamp, we guarantee high quality key components and precise manufacturing for problem-free operation (tested with 30.000 loads).
|
|
- Exceptionally large door opening (70cm), with very strong door hinges, opens 180°.
- Tub is made of premium quality stainless steel AISI 304.
- Drum and lifting ribs are made of higher class of premium stainless steel AISI 316L.
- The large diameter (1280 mm) and the 6 extra lifting perforated ribs, allow better dropping and shower actions for a cleaner wash, with less crumpling of permanent press fabrics.
- The FS120 is equipped with 4 air-bags and 4 hydraulic suspensions.
- Machine is also equipped with 2 horizontal hydraulic suspensions.
In combination with a frequency controlled motor (FS-range) unbalances are almost non-existing.
- The FS120 is standard equipped with a frequency-controlled motor.
Moreover, it gives a perfect washing result, a smooth operation and a longer lifespan, both of the linen and the machine.
- The shaft can be loosened from the drum with a unique screw-bolt-system. Therefore the complete bearing house (including bearing, seals, shaft,…) can be removed separately without having to disassemble the whole machine and even drum do not have to be released.
|
|
- The cabinet is made in premiun quality stainless steel AISI 304 (also side panels )
- Two large drain valves (o 76 mm) ensures fast draining and a shorter cycle time
- The three standard large inlet valves (1") ensures short cycle times and can be used for waterrecovery systems.
- Exceptionally large door opening (53 cm), with very strong door hinges, opens 180°, ensures easy loading and unloading.
- The stainless steel soap dispenser consists of 5 removable compartments.
- The soap is added to the washing water at the bottom of the tub at the right moment during the washing cycle. This prevents direct contact with the linen and avoids damage of the linen.
The water for cool down is added in the same way. This avoids ‘thermic shock’, the main cause of shrinking.
- The machine can be provided with soap pumps. (up to 8 connections).
- The FS-models are standard equipped with a frequency-controlled motor and a free programmable microprocessor. Moreover, it gives a perfect washing result, a smooth operation and a longer lifespan, both of the linen and the machine.
- Two large industrial ball bearings, protect by three consecutive seals against leakage, guarantees a long life span.
|
|
The forthcoming year 2008 will be extremely important for Primus as numerous new products are to be launched. The first of these products is a new washer-extractor, namely FS23.
FS23 is a washer-extrator with the capacity of 22 kg (220 liters) and, similarly to models FS 33 40 55, it can be equipped with the Graphitronic® multifunctional timer.
The new washer was specially developed for the Coin–op markets as it is very compact (21 cm lower & 8,5 cm slimmer than its forerunner FS22). Other great features on the FS23 coin are the user friendly Easy control® , integrated coin timer and the soap hopper on the top lid.
Optionally there will also be a FS23 „PRO“ available for the OPL market. The FS23 „PRO“ will be equipped with a stanless steel soap hopper with 4 compartments mounted on the front.
Moreover, a lot of attention has been paid to uniformity and design, so that the washer would form a harmonious unit with the other washer extractors in the range.
|
|
- The cabinet is made in premiun quality stainless steel AISI 304 (also side panels )
- The large drain valve ( o 76 mm) ensures fast draining and a shorter cycle time
- Extraordinary big door diameter ensures easy loading and unloading
- 5 Large compartment soap dispenser.
- The soap is added to the washing water at the bottom of the tub at the right moment during the
washing cycle. This prevents direct contact with the linen and avoids damage of the linen.
The water for cool down is added in the same way. This avoids ‘thermic shock’, the main cause of
shrinking.
- The machines are standard provided with liquid soap connections.
- Frequency controlled motor together with microprocessor control gives a perfect washing result, a smooth operation and a longer lifespan
|
|
Solid construction: durable stainless steel drum, tub and cabinet
- Easy for operation and easy programmable EC-microprocessor
- Short washing cycles available (+/- 34 minutes) when connected to a hot water supply, high power
of 9 kW (3 phase)
- The special function button has the possibility to programm one extra funcition :
install the soaking time, to delay the starting of a programme, to wash more economically by
switching off the prewash or set a economic or gentle programm or desactivating the spin sequence.
- High Extraction speed till 1150 rpm. Depending on the programme from 800 up to 1150 rpm
which results in a high G-factor of 300.
- Standard with drain valve, available with pump.
- Available with matching dryer DA9, DAM9 or stacked version DAMS9
- Safety main switch
- Electrical opening of the door, with possible emergency opening
- The washer can be equipped with an external coin meter, connectable to the timer.
|
|
- The stainless steel soap dispenser consists of 5 removable compartments.
- Drum, tub and middle panels are entirely made of stainless steel
- Large door opening for easy loading and unloading.
- The MB machine is equipped with a frequency-controlled motor. Possibility to set the speed at random. The risk of unbalance during spinning is reduced. Perfect washing result, a smooth operation and a longer lifespan.
- Two large (75mm) drain valves ensure a very fast draining and a shorter cycle.
The second drain valve can be used for waterrecycling.
|
|
- 33/35 lbs
- Opposed doors (soiled room / clean room)
- Electric heating
- Extraction 1000 RPM
- Microprocessor control
- Large loading doors
- Perfectly designed for nursing homes
and for washing resident garments
Front end-loading and rear unloading machines
for use where soiled and cleaned linen must be
separated in accordance with the RABC standards.
|
|
PCH Model: PCH-25 / PCH-35 / PCH-45 / PCH-62 / PCH-83
High speed barrier washer extractor with two opposed doors.
Capacity: 25/35/45/62/83 kg. (55/77/99/136/183 lbs.)
G Factor 350.
Inner and outer drums, doors and external panels in stainless steel.
Installation: No holding-down required.
Safety doors: with electrical lock.
Microprocessor control.
Heating: Electric, Steam.
|
|
- The stainless steel soap dispenser consists of 5 removable compartments.
- Drum, tub and middle panels are entirely made of stainless steel
- Large door opening for easy loading and unloading.
- The MB machine is equipped with a frequency-controlled motor. Possibility to set the speed at random. The risk of unbalance during spinning is reduced. Perfect washing result, a smooth operation and a longer lifespan.
- Two large (75mm) drain valves ensure a very fast draining and a shorter cycle.
The second drain valve can be used for waterrecycling.
|
|
- Solid construction
- Excellent stability due to suspension with gas shock absorbers
- The MB-machine is standard equipped with frequency controlled drive
- Large door opening of 1100mm
- Integrated waterrecycling system available
- Cooldown and special soft wash for delicates
- Fully stainless steel drum and tub and stainless steel cabinet
- The MB-machine is equipped with 4 airbags and 4 hydraulic suspensions
- Large inlet valves and efficient drain
|
|
Features
- High extraction force for efficient dewatering
- Available with two types of program controls:
- AWS - Automatic Weighing System with Compass Control - determine the wash load and adopt the water intake accordingly. Savings on water and energy if machine is not fully loaded.
- Extremely low water and energy consumption.
- Four compartment soap box for manual dosing of powder or liquid detergent
- Large door opening for easy loading/unloading.
- Low noise level for pleasant working environment
- Stainless and galvanized steel in all vital parts for high degree of rust protection
- Super Balance, software ensure a quick distribution/extraction cycle with low noise/vibration level
|
|
Features
- High extraction force for efficient dewatering
- Clarus Control fully programmable, microprocessor with up to 192 programs
- Large door opening for easy loading/unloading.
- Low noise level for pleasant working environment
- One frequency controlled motor
- Prepared for 9 liquid detergent signals
- Stainless and galvanized steel in all vital parts for high degree of rust protection
- Stainless steel front panel and powder painted side panels
- Electrical or direct steam heating
- SuperBalanceTM guarantees the correct extraction force
|
|
Features
- High extraction force for efficient dewatering
- Clarus Control fully programmable, microprocessor with up to 192 programs
- Large door opening for easy loading/unloading.
- Prepared for 13 liquid detergent signals Eight liquid supply connections
- Stainless steel in all vital parts for high degree of rust protection
- Stainless steel front panel and powder painted side panels
- Direct steam heating
- Frequency controlled motor for max. versatility
- Oil lubrication of bearing gaskets
- Designed for easy service and maintenance
- SuperBalanceTM guarantees the correct extraction force
|
|
Features
- High extraction force for efficient dewatering
- Available with two types of program controls:
- AWS - Automatic Weighing System with Compass Control - determine the wash load and adopt the water intake accordingly. Savings on water and energy if machine is not fully loaded.
- Extremely low water and energy consumption.
- Four compartment soap box for manual dosing of powder or liquid detergent
- Stainless steel front panel and grey side panels
- Large door opening for easy loading/unloading.
- Low noise level for pleasant working environment
- SuperBalanceTM guarantees the correct extraction force
|
|
Features
- Compass Control microprocessor offers:
- AWS - Automatic Weighing System with Compass Control - determine the wash load and adopt the water intake accordingly. Savings on water and energy if machine is not fully loaded.
- Extremely low water and energy consumption.
- Four compartment soap box for manual dosing of powder or liquid detergent
- High extraction force for efficient dewatering
- Door with gasket and strong hinges built for heavy duty operation
- Stainless and galvanized steel in all vital parts for high degree of rust protection
- SuperBalanceTM guarantees the correct extraction force
|
|
Applications: Low volume laundries placing less emphasis on operating costs than machine costs.
Examples: Athletic facilities, small motels, residential care facilities. |
|
| Applications: Specially designed for foundationless installations in medium to high volume laundries. |
|
|
|
