|
|
Description:
60mm diameter beacon for flush-mount adjustment consisting of a stainless-steel square or round trim and a tempered-glass circular diffuser. Lights up with LEDs and it has accessories available for non-mains use (PBL units) or at low safety voltage (TL transformer). Particularly suitable for signalling in damp environments.
Characteristics:
Format: AQUA
Operation: Luminaire
Voltage: 230 V 50Hz, 24 V AC/DC
Mains lamp: Amber, white, red and blue LED
Emergency lamp: -
Degree of protection: IP66 - IK07
Autonomy (h): It depends on the power suppy unit*
Electrical insulation: Type II, Type III
|
|
|
|
|
|
B-SIDE LED is an extraordinary urban luminaire and for its organic and light design it suits harmonically at any space granting a high visual comfort.
B-SIDE LED has been designed for lighting both public and private walk through areas. Its auto lighting system allows it to light as well as work as a signaling spot so it becomes a space structuring element.
This new luminaire, is specifically thought for LED sources, so it gives us a high efficiency lighting and a minimum maintenance thanks to the 50.000 hours of its led life.
The range of B-SIDE LED bollards consist of 6 models according to their height and power, all them with an IP65 (Very High protection against powder and liquids). It is made of aluminum extrusion and injection, and painted in grey textured polyester. Its base has an anticorrosive treatment of Alodine 1200, which allows us to fit it on any type of surface.
B-SIDE LED is an excellent anti-vandalism lighting solution, providing safety and solidity for lighting to public parks, gardens and many different urban areas. This is due to its rugged construction (IK 10: Maximum grade of protection) which ensures the fitting remains intact when exposed to possible attacks or collisions.
|
|
Description:
6mm diameter flat-fitting unit comprising a cylindrical stainless steel body and a polycarbonate opal or transparent diffuser that picks up the LED colour. It includes accessories to enable operation only when connected to the mains power supply (TL safety transformer) or with the mains power on or off (PBL equipment).
Characteristics:
Format: CLAVO
Operation: Luminaire
Voltage: 24V AC/DC
Autonomy: It depends on the power supply unit*
Mains lamp: Amber, white, red and blue LED
Degree of protection: IP64 IK07
Electrical insulation: Type III
|
|
Description:
20mm diameter flat-fitting unit comprising a round stainless steel embellisher and a circular polycarbonate transparent diffuser that picks up the LED colour. It includes accessories to enable operation only when connected to the mains power supply (TL safety transformer) or with the mains power on or off (PBL equipment).
Characteristics:
Format: LEDA
Operation: Luminaire
Voltage: 24 V AC/DC
Autonomy (h): it depends on the power supply unit *
Mains lamp: Amber, white, red and blue LED
Degree of protection: IP64 IK07
Electrical insulation: Type III
|
|
Brio WE
Inox build- in Led light (ground, path, wall...)
Power value 20 W
Resistant stainless steel body 3.5t maximum supported
Total watertightness IP- 68
|
|
1750 Bourgogne - Outdoor LED marker lighting for ground embedment or wall fixture, circular Ø 44mm offering a large panel of luminous effect (choice of LED quantity, colour and efficiency) .
Available in red, yellow/ orange, green, blue, cold white or warm white with dynamic RGB colour change on request.
Offering various embedment options based on the required type of connection.
IP68
Chocks resistance 60J
|
|
A2 Range - MODULAR -
Exit sign with individual battery or for use with central battery systems
Synthetic housing.
Viewing distance: 15 or 30m
Maintained or non-maintained operation, or AC/DC power supply.
|
|
|
|
|
|
LED Neon-Flex™ Plus is the next generation of the patented LED Neon-Flex™ product line that exceeds the light output of glass neon and other similar LED Lighting Products.
LED Neon-Flex™ Plus has been engineered to achieve a lumen efficacy of 36.1Lm/w and 63Lm/Ft. LED Neon-Flex™ for the first time can now be viewed as direct replacement to traditional glass Neon.
LED Neon-Flex™ Plus’s increased lumen output is a direct result of using high quality materials, high brightness LEDs coupled with an enhanced PVC mixture used in the main housing extrusion process. This optical gain enhancing PVC increases homogenization of the light effect which translates the maximum amount of lumen consistently delivered to the surface of the Neon-Flex™ Plus.
In comparison to white glass neon, the luminous efficacy of white LED Neon-Flex™ Plus achieves an equivalent brightness of 36.1Lm/W while using 6.6 times less energy. The Lumen efficacy and power consumption of the primary colors red, green, blue, and yellow LED Neon-Flex™ Plus are significantly comparable to glass neon as well.
|
|
|
|
|
|
|
xceeding the performance of other power LED projectors, the latest solution by GRIVEN in RGB LED application conveys a new series of units fitted with ten 3W full colour LEDs designed for refined architectural decoration. The new PARADE D-RGB-10 RECESSED bars are super flux and high luminance colour changers for recessed use in pedestrian areas that incorporate state of the art electronic colour mixing and high reliability, meaning powerful and real colour rendering and minimal maintenance, where the additional benefits are durability, low power consumption, cool running and a quick light source response time. Superb output with real uniform colour coverage even on close-up installations is provided by the newly conceived elliptical optics that can now capture a greater fraction of light with a higher transmission efficiency. PARADE D-RGB-10 RECESSED can be installed in ground outdoor in pedestrian areas, featuring an IP67 weather protection along with a compact size and a light weight manageability. Moreover, a truly comfortable set up is guaranteed by the total absence of external power supply box requirement. The digital control system, obtainable from any four-channel remote DMX512 control desk, includes also stand alone functions and master and slave mode.
|
|
|
With a pixel pitch of 31.25mm and a wide beam angle of 120°, the Traxon 64PXL Board RGB represents an efficient solution for medium to high resolution video replay. The fixture offers control flexibility by featuring DMX as well as DVI input signals. Due to the high brightness and color consistency of the 64 individually controllable LEDs as well as its narrow pixel pitch, the 64PXL Board RGB particularly meets the demands of the commercial, hospitality and entertainment sector. The 64PXL Board is equipped with Smart Chip™ technology and high performance, energy efficient Nichia LEDs, enabling auto-addressing and an easy configuration.
|
|
A great LED tracklight with high output, controllable light available in two versions:
- Cheese Forta
2000Lm, 4000K white LED light
45W power consumption
- Cheese Lexa
Superior quality white LED light programmable from 2700K to 6500K
Fully RGB programmable and dimmable 0-100% without colour shift
1100Lm, 11W power consumption
- Both have the following advantages:
50 000h average lifetime
Consistent colour and lumen output
No heat or UV radiation
Integrated thermal protection
fitted with an additional reflector to focus the light where it is most needed
In addition the Cheese is also available in pendant and downlight versions
|
|
The Mini-Man is the first in our range of LED fixtures featuring an innovative LED solution combining diodes and high performance optics for optimal lightoutput.
at 3,2W and 500mA the average life time is 30.000h and two lightcolours are available: warm white (3050K) and cold white (6900K)
available beam angles are 8,5°, 15° and 25°.
|
|
One of the first LED tracklights with a functional, high light output comparable to current benchmarks set by HID and compact fluorescent lighting; light output is 2000Lm
Superior quality white 4000K LED light
50 000h average lifetime
Consistent colour and lumen output over life
No heat or UV radiation
45W system power consumption
Integrated thermal protection
fitted with an additional reflector in different beam angles to focus the light where it is most needed
|
|
Extremely flexible LED tracklight with a high light output of 1100Lm
Superior quality white LED light programmable from 2700K to 6500K
fully RGB programmable and dimmable 0-100% without colour shift
50 000h average lifetime
Consistent colour and lumen output over life
No heat or UV radiation
18W power consumption
Integrated thermal protection
fitted with an additional reflector to focus the light where it is most needed
Controllable through DMX512 & RDM protocols (DALI being added)
Lival can also supply various control panels and solutions - please contact us for more information
|
|
|
The Cove Light XR combines compact design with advanced LED technology to accentuate alcoves and recessed spaces with White light. The Cove Light XR features a generous 180° locking rotation for flexible mounting and installation scenarios. A wide beam angle of 120° ensures an even glow of white. Twelve high-performance surface-mounted LEDs provide an intense light output; boutiques and fashion stores are only a small excerpt of possible application areas for warm and cold hues of white. Traxon's Dynamic White (24 SMD) option allows you to adjust and optimize the color temperature of your fixture to changing ambient conditions and/or usage.
|
|
|
|
|
|
Keope ceramics introduce the innovative system of lighting TI-LED.
This system represents an ideal solution or in order to decorate or in order to resolve problems of lighting, tracing covered luminous in little illuminated atmospheres. Chosen emitters LED from Keope Ceramics guarantee an elevated luminous flow between those available ones on the market and concur to realize shining solutions of illuminotecnica; moreover the luminous bundle of the LED does not emit dangerous ultraviolet rays, neither the heat of the infrared, thus avoiding problems of illuminated aging or scolorimento of the superficial ones. The used LED, than are taken advantage of a technology to the said solid state to "inverse pyramid", do not contain parts in motion, do not risk therefore to break off themselves, to get out of order themselves, to lose harmful substances or to contaminate the atmosphere. The advantages that this technology introduces are numerous: a greater duration of any other luminous source, practically null costs of maintenance, costs of fall-back, departure to cold without some problem. System TI-LED is applicable to the most modern collections of the production of Keope Ceramics and is available in n° 5 formats.
The color emitted from the LED depends from the color of the stopper in polycarbonate protect that them. The stoppers, interchanging, are available in seven colors. It puts down regarding it, the containing tiles the LED can be rested using traditional adhesives and it is not necessary to take part preventively in the bottom of rests as I block it in the below part the tile is of approximately 3 milimeter www.ti-led.it
|
|
MINI and NIQ leds projectors to be embedded. They incorporate high intensity LUXEON K2 Leds, so the luminance power is assured.
They are valid projectors for indoor and outdoor uses, but its safety class IP68, makes ideals for outer architectonic illumination and aquatic illumination of sources or spaces. These lights incorporate a high resistance glass that makes suitable for zones where there is circulation of people (walks, gardens, public facades, dancing sources in whom it is walked above, parks of game for children,…)
|
|
Luminous bar with LED conceived to trace lines
luminous continuous in any rigid form of mediums.
The bar is equipped with 240LED/m moulded in one
profile of embedding out of aluminum anodized with one
very low thickness. It is fed in low tension of
security (48V), which returns it adapted particularly to
the installation in the public places. Colors of the LED:
cold white (HW) or white heat (HE).
- Low thickness (18mm). Length on request
(until 2m). Possibility of aligning several bars
in order to create continuous luminous lines.
- Electronics components moulded and thus protected
moisture and shocks.
- Advantages of the LED: remarkable longevity (according to
color up to 100.000 hours); low fuel consumption;
resistance to the vibrations)
|
|
|
Until now, the low power consumption and limited output of early generation light emitting diodes were typically only applied for observable decorative or indicative uses, capitalizing on the rainbow hues and programming abilities that are advantageous for entertainment venues, traffic signals, signage, and ornamental elements. In fact, it was often said,"LEDs are meant to be seen, not seen by," however, with the recent development of new super-bright white diodes and other performance improvements, the acceptability of LEDs for mainstream uses has grown exponentially.
|
|
|
The Extremeline 100 series is a powerful projector system in a low profile (3.1" H 1.4") linear LED strip that combines industry leading LEDs with ultra high performance optics spaced to maximize illumination power while producing exceptionally tight beam control without striations.
|
|
Voltages:
LED StarBrite Controller: 85V~132V/170V~264V AC, 50/60Hz
LED StarBrite: 10V~15V DC
Power Consumption:
LED StarBrite Controller: Input: 200W, Output: Max. 150W
(it can drive 4pcs of LED StarBrite)
LED StarBrite: Less than 30W
8 Routes*18 LEDs=144LEDs
Brightness of LED StarBrite:
More than 150cd when all the LEDs emit white light
Strobe speed adjustable
Work ambient temperature:
0°C~40°C
IP Rate:
IPX3
LEDs life:
30000 hours
Control:
DMX 512, Stand-alone mode, Master/slave operation
12 pre-set programs
26 channels
Other Features:
White colour channel available with strobe and dimmer
for testing brightness;
Pre-set programs can be selected both from DMX
control and manual;
Key-press lock for avoiding improper operation
Net Weight:
LED StarBrite(15m signal connection cable included): 20kg
LED StarBrite Controller: 2.3kg
|
|
|
The Cylindrix II LED track luminaire integrates the latest LED technology into a thermally efficient, long lasting, high-output accent and display luminaire. It features the latest high power, warm white LED technology that delivers high performance lighting with color temperatures similar to that of incandescent.
|
|
|
Ground is a recessed floor light IP 67 equips with 3 LED of power of 1W. 6 colors of LED and 3 optics are available (see above). This embeds is suitable for motor vehicles, it resists has shocks of 10J and has a weight of 10OOKg.
|
|
|
Smallest recessed floor light in the world in LED of power IP 66. Floor is a product of beaconing, without optics, its light is diffuseea180°.
|
|
|
(type 5). This innovative and compact light box (patented) is an ideal solution to create decorative lighting effects, for interior or exterior applications and for applications where vol have some problems < dimensions for light box or noise Only on request, you can have different led colours
|
|
Two versions available:
- 270*270*65mm 9 LED for a flow of 900 lumens (comparable has 9*10W G4 of mark). Code 37 01 09AB.
-520*520*110mm 33 LED carrying flow has 4000 lumens (either 30*10W G4 of mark). Code 37 01 33AB.
|
|
|
Modular LED system. Body in metal finishing in mat white or black. Thickness 11 mm. The fixing is carried out throught magnets. Equipped with 6 LED Rebel 1W 350mA. 45° beam. IP40. Patented
|
|
Modular LED system for interior/exterior. Body in aluminium section bar, where a LED strip 24V DC high emission is placed. Diffuser in clear polycarbonate diam. 1,6 cm. Fixing with steel brackets. L= 104, 202, 306 cm. Adjustable optic. IP65. The system include the feeding head-cap and the end-cap. PSU driver not included.
Available also in RGB DMX version.
|
|
Product Features:
-Unique and high efficiency heat sinking design;
-Aluminium groove + mist PC cover
-Round shape with SMD 5050 as the light source;
-25cm,50cm,100cm are available for choice
-Easy to be extended to different length by connecting directly or by connecting wires
-Precise and simple structure for fixing
-DC24V
Application:
Suitable for house decoration, coving lighting, cellaret, shoes shelves, ceiling,wardrobe, hotel decoration, advertising back lighting etc
Cautions:
-Switch off the power before replacing the lamp
-Keep away from direct sunshine and high temperature
-Non - dimmable
-Indoor use only
-If any doubt about the installation or use of this product, consult a
competent electrician
|
|
|
|
