|
|
The MRI Luminous SkyCeiling expands the confined atmosphere of the MRI suite into a comfortable healing environment. Combining the proven effect of natural imagery with the therapeutic quality of bright RFfreeLux™ LED lighting, the MRI Luminous SkyCeiling produces a compelling experience of the sky's vast openness and vitality – calming patients during the radiological procedure.
SkyCeilings™ (virtual skylights) are architectural illusions of the sky that deliver an authentic experience of nature. Our SkyCeilings elicit genuine psycho-physiological relaxation responses in the observer and transform enclosed spaces into beautiful, daylight-filled environments of refreshing vitality. Additionally, these design solutions are also known to increase productivity, reduced fatigue and result in higher employee satisfaction in a work environment. Luminous SkyCeilings (back-lit) consist of translucent panels, a choice of our energy efficient LED or fluorescent "daylight-balanced" lighting systems, and our patent-pending 'elevator system' that gives the ceiling grid a three-dimensional appearance.
|
|
The PLUG & PLAY are a product ready with employment (no programmatio necessary) with catch sector 230V.
Tubes color LED - 24V
- Length 1m
- Products of outside - IP 44
- Products available only on order
Advantages
Very low tension (24v)
Power
Low electricity consumption
Lightness and facility of installation
Great reliability
|
|
Description:
60mm diameter beacon for flush-mount adjustment consisting of a stainless-steel square or round trim and a tempered-glass circular diffuser. Lights up with LEDs and it has accessories available for non-mains use (PBL units) or at low safety voltage (TL transformer). Particularly suitable for signalling in damp environments.
Characteristics:
Format: AQUA
Operation: Luminaire
Voltage: 230 V 50Hz, 24 V AC/DC
Mains lamp: Amber, white, red and blue LED
Emergency lamp: -
Degree of protection: IP66 - IK07
Autonomy (h): It depends on the power suppy unit*
Electrical insulation: Type II, Type III
|
|
Description:
20mm diameter flat-fitting unit comprising a round stainless steel embellisher and a circular polycarbonate transparent diffuser that picks up the LED colour. It includes accessories to enable operation only when connected to the mains power supply (TL safety transformer) or with the mains power on or off (PBL equipment).
Characteristics:
Format: LEDA
Operation: Luminaire
Voltage: 24 V AC/DC
Autonomy (h): it depends on the power supply unit *
Mains lamp: Amber, white, red and blue LED
Degree of protection: IP64 IK07
Electrical insulation: Type III
|
|
Description:
6mm diameter flat-fitting unit comprising a cylindrical stainless steel body and a polycarbonate opal or transparent diffuser that picks up the LED colour. It includes accessories to enable operation only when connected to the mains power supply (TL safety transformer) or with the mains power on or off (PBL equipment).
Characteristics:
Format: CLAVO
Operation: Luminaire
Voltage: 24V AC/DC
Autonomy: It depends on the power supply unit*
Mains lamp: Amber, white, red and blue LED
Degree of protection: IP64 IK07
Electrical insulation: Type III
|
|
MINI and NIQ leds projectors to be embedded. They incorporate high intensity LUXEON K2 Leds, so the luminance power is assured.
They are valid projectors for indoor and outdoor uses, but its safety class IP68, makes ideals for outer architectonic illumination and aquatic illumination of sources or spaces. These lights incorporate a high resistance glass that makes suitable for zones where there is circulation of people (walks, gardens, public facades, dancing sources in whom it is walked above, parks of game for children,…)
|
|
1830 Lucerne - outdoor marker lighting for ground embedment or wall fixture, circular Ø 100 mm or with squared-flange 100 x 100 offering a large panel of luminous effect (choice of LED quantity, colour and efficiency) .
Available in red, yellow/ orange, green, blue, cold white or warm white with dynamic RGB colour change on request.
Offering various embedment options based on the required type of connection.
IP67
Chocks resistance 60J
|
|
1750 Bourgogne - Outdoor LED marker lighting for ground embedment or wall fixture, circular Ø 44mm offering a large panel of luminous effect (choice of LED quantity, colour and efficiency) .
Available in red, yellow/ orange, green, blue, cold white or warm white with dynamic RGB colour change on request.
Offering various embedment options based on the required type of connection.
IP68
Chocks resistance 60J
|
|
5620 Brunei - Slim LED Lightbar for outdoor flush-embedded applications offering a wide range of luminous effects thanks to a large selection of LED density (40, 60, 120 or 165 LEDs/m). Length on request (max. 2m), width 25mm.
Available in red, yellow/ orange, green, blue, cold white or warm white with dynamic RGB colour change via DMX ou DALI on request.
Recessed in a low (32mm) or deep (82mm) profile acting as cable-path for an easy implementation.
IP68
Chocks resistance 60J
|
|
5750 St Rémy - Recessed lightramp for ground installations width 100mm and various lengths on request, equipped with ledmodules (LMS) 1W or 3W offering a great choice of optics.
Choice of colour: cold or warm white, blue, yellow/amber, red, green and quadrichromy.
Dynamic colour control with DMX or DALI.
Stainless steel housing, 15mm thick window with toughened glass, withstands charges up to 5000kg.
IP 67
|
|
LED Linear Light Type AT753-C
With the new linear light AT753-C, our expectations for best usage of energy and absolute light quality are met.
Economical
Its form makes the linear light especially adept to replace common fluorescent lights economically.
Deliberate
Specialities and advantages of linear light AT753-C are extremely robust case, waterproof, heat resistant and maintenance free. Optional: explosive protected.
|
|
|
(type 5). This innovative and compact light box (patented) is an ideal solution to create decorative lighting effects, for interior or exterior applications and for applications where vol have some problems < dimensions for light box or noise Only on request, you can have different led colours
|
|
Block of lighting of environment or anti-panic with LED with
transparent or frosted window conceived to ensure one
uniform lighting in the event of breakdown sector. The part
luminous - 6 LED of power - is placed in a box
out of tack welded aluminum of rectangular section
closed at the two ends. Lighting especially
conceived for an integration in spaces claiming
a certain esthetism.
Completion adapted to interior architecture.
Advantages of the LED: longevity (up to 50.000 hours);
low fuel consumption; resistance to the vibrations.
|
|
Luminous bar with LED conceived to trace lines
luminous continuous in any rigid form of mediums.
The bar is equipped with 240LED/m moulded in one
profile of embedding out of aluminum anodized with one
very low thickness. It is fed in low tension of
security (48V), which returns it adapted particularly to
the installation in the public places. Colors of the LED:
cold white (HW) or white heat (HE).
- Low thickness (18mm). Length on request
(until 2m). Possibility of aligning several bars
in order to create continuous luminous lines.
- Electronics components moulded and thus protected
moisture and shocks.
- Advantages of the LED: remarkable longevity (according to
color up to 100.000 hours); low fuel consumption;
resistance to the vibrations)
|
|
|
Altman%u2019s IQseries just got smarter. The revolutionary IQ30 LED gives a whole new meaning to the phrase %u201Csmart fixture%u201D. This 10-watt RGB color-changing LED luminaire allows for up to 16.7 million different colors. With 75 high-brightness colored LED%u2019s, this aesthetically pleasing architectural PAR fixture has all the advantages of light-emitting diodes along with the %u201Cclassic look%u201D of a conventional architectural light.
|
|
The Avant lights is characterised by the most comprehensive Lamp range of lamp varieties, sizes, finishes and technical accessories. Minimalist, with stylised proportions it fits perfectly into any architectural atmosphere. There are four very different sizes of models, with two possible finishes, two-tone light/dark grey or matt white. All of these models are available with halogen, metal halide and LED lamps.
This range of lights can be used in places such as shops, museums and galleries since it has technical accessories like refractors, anti-glare grills and colour filters that enable high technical performance levels.
|
|
Spot LED - small delight
Featuring an innovative light emitting diode, the Spot LED is a real revolution in accent lighting. With an adjustable projector head of only Ø 31mm, this is an incredibly small luminaire.
It incorporates the LUXEON® K2 high power LED, which delivers more light than ever before and has no UV/IR radiation. Spot LED is available as a complete range - surface mounted, recessed, track mounted and wall mounted.
|
|
| ... products without information |
| |
|
|
see the results for the following category
