|
|
The Mini projector is the best choice to decorate corners, small pools, steps and spas. The Mini model uses high light intensity LEDs with a much higher life span than traditional lamp models and a low energy consumption rate. With LED lighting you can create a wide range of different atmospheres thanks to its 12 colours and 9 programmes.
It can be synchronised together with standard projectors and flat LED projectors in the same pool. |
|
Underwater LED K2 - illumination in water
Underwater LED is a compact, innovative spot and recessed solution designed to create amazing effects in wet or water environments, like fountains. Fully IP68 to a depth of 10m, it offers a choice of beams - 12°, 25° and 40° - for precision illumination of, for example, fountains or ponds.
Underwater LED is available in blue, white and RGB versions; other colours are available upon request. |
|
GEMINI PROJECTOR 7 LED
HBLED Projector on Bracket for technical lighting IP67
Aluminium body covered by epoxy grey paint, high transparency glass and high resistance (IK10), silicon sealing gasket for high temperatures, stainless steel tightening screws.
Alternative finishing available on demand (aluminium, 316L Stainless steel, special painting any colour on demand.
RGB VERSION
Supplied with a 6x0.22mm² cable 3mt long and equipped of special connector to interface the other components of RGB piloting system.
MONOCHROME VERSION
Supplied with a 2x0.75mm² cable 3mt long
All the products of this range need an external power supply available in our accessories range. |
|
The Avant lights is characterised by the most comprehensive Lamp range of lamp varieties, sizes, finishes and technical accessories. Minimalist, with stylised proportions it fits perfectly into any architectural atmosphere. There are four very different sizes of models, with two possible finishes, two-tone light/dark grey or matt white. All of these models are available with halogen, metal halide and LED lamps.
This range of lights can be used in places such as shops, museums and galleries since it has technical accessories like refractors, anti-glare grills and colour filters that enable high technical performance levels. |
|
VEGA MICRO
Lighting and signaling small HBLED recessed lighting fixture water proof IP67.
Various configurations for materials and shape: (aluminum, stainless steel 316L, marine quality, with a supplementary passivation treatment, Brass and copper).
Insulation class III.
Product supplied with 2x0.75 mm² cable 1m long.
Need of a separated converter power supply. |
|
NEW PRODUCT 2007/2008
LED Spot light for bed side.
To be inserted into a wood panel.
Delivered with a 3 Watts (equivalent 40 W) LEDlight white warm light (3000° K).
Narrow beam to allow confortable reading .
For bed side use.
Price quoted for 1 spotlight with one miniature (15mmx30mmx45mm) electronic transformer.
50 000 hours.
Available from October 2007 in a black and nickel bright finish with or without switch.
Please note: To be fixed into a wooden panel.
|
|
Recessed downlight in thermoplastic material with 1 LED. |
|
Spot LED - small delight
Featuring an innovative light emitting diode, the Spot LED is a real revolution in accent lighting. With an adjustable projector head of only Ø 31mm, this is an incredibly small luminaire.
It incorporates the LUXEON® K2 high power LED, which delivers more light than ever before and has no UV/IR radiation. Spot LED is available as a complete range - surface mounted, recessed, track mounted and wall mounted. |
|
Led spot for external. Body in anodized aluminium obtained from a billet to
optimize heat dissipation, gasket for protection against dust and water, tight cable gland in metal. The projector is equipped with 6 Led Luxeon K2
700mA (18W tot.) high emission, internal driver at 10/30V DC. This driver
is able to adjust the drop of tension in case of longest cable using 24V DC
feeders. Optic with 6 lenses 10/25/40° beam fixed on eletronic circuit,
protective glass and threaded ring in aluminium. Recessed box in synthetic
material to install the spot in concrete. IP68. |
|
Led spot for exterior. Stainless steel body. Obtained from a round billet to optimize the heat dissipation, gaskets to protect against dust and water infiltration and waterproof metal gland. Led 3W 1W 350mA high emission, optic with triple lens with optic 25/30°, glass protection and screw lock nut. Stainless steel drilling brackets to fix and adjust the spot. IP 68 allowed to protect the spot in case of water dipping. The spot can be fixed using the accessories, wall/ceiling (for an easy maintenance) and peg for the ground.
|
|
Led spot of small dimensions for internal use. Aluminium anodized body,
obtained from a round billet to optimize the heat dissipation. Led 3W 700 m
high emission, I.R.L. optic with lens 60° and threaded ring. Stainless steel
bracket to fix the spot and adjust it. IP40. |
|
LED Assembling Module Type AT951
The LED Assembling Module Type AT951 was customised to meet individual illumination conveniences.
Versatile
LEDworx® assembling spotlights are part of a building kit of different modules that can be fit together user-defined or can be customised as separate LED-spot for individual illumination settings. This makes our LED-modules not merely an illumination device, but also tool for personalised and creative living.
Aesthetic
The LED spots are available in black or white colours and are produced from reusable synthetic material. Cover and lens optics are manufactured from UV-resistant polycarbonates. |
|
| Directional with LED high power 1W/350mA or 2,5W/700mA, monochromic spot, for lighting of stressing. 4 focal distances: of 10° with 120°. Fixing on directional support: UNIVERS. Flange stainless 316L and clearly soaked glass of 5mm thickness for reliable use in public places. Lifespan of LEDs: 50 000 hours. |
|
| ... products without information |
| |
|
|
see the results for the following category