|
|
The BL 229 raising barrier is a universal barrier : its high performance and great reliability enable it to be used in a wide range of applications : traffic management, parking lots, industrial sites... and even toll roads (for the "fast" version).
Its main features are :
Modularity
- Barrier designed for many applications and environments
- Numerous accessories offered, allowing to meet various installation constraints, and various requirements in terms of security
- Barrier equipped with control logic allowing operation perfectly adapted to every situation
- Change of configuration or operation possible, even after initial installation of the product
Performance
- Fast and quiet movements
- Assimilation of major flows of vehicles
|
|
The BLG 76 raising barrier with fence is built on the robust architecture of the BL 52, and is equipped with a boom carrying a mesh fence.
It is an interesting alternative to a sliding gate, because in addition to closing an access hermetically, it makes it possible to control it, vehicle by vehicle, and in a more fluid way.
Its main features are :
- Reinforced security
- Closing access to pedestrians as well, even on a very wide road
- Robustness and dissuasion of the unit
- Strict and effective entry control
Assimilation of a major flow of vehicles
- System faster than a sliding gate
Compactness on the ground
- Small overall dimensions in comparison with a sliding gate
|
|
|
|
|
|
Automatic lifting barriers
FAAC automatic barriers are an excellent solution for control of vehicle accesses in private, industrial and commercial areas. A wide range of products satisfies the broadest requirements in terms of entrance width and transit frequency: from the access of a condo parking area to the access point of a motorway.
The core of FAAC barrier range consists of four models: 615 for medium transit frequency applications, 620 for intense traffic accesses, 640 for intense traffic management in large industrial accesses, and 642 that provides high resistance to any type of aggressive environments through its rugged stainless steel hood.
Other three versions of the 615 and 620 models complete the range: 615 R (Rapid), 620 R and 620SR (Super Rapid), ideal for applications requiring very short opening times (e.g. parking areas, motorways).
All FAAC barriers are based on hydraulic technology that ensures very high performances, reliability, and very long product life. Unlike electro-mechanical barriers, hydraulic barriers have fewer gears, and the wear is considerably reduced by the use of a fluid (oil) as a lubricant.
Since 1993, FAAC’s quality and reliability are recognized by Società Autostrade SpA, administrator of the Italian highway network, which has selected FAAC high performance automatic barriers for all its tollbooths.
|
|
|
|
|
|
Barriers
Betafence barriers are a part of the range of products to provide total access control in combination with our range of professional fencing systems.
Benefits
Complete assortment
Automatic operation for openings up to 10 m, usingthe same motorisation and electronic controls for the different types available. Manual barriers available for penings up to 7 m.
Reliability
Durable design with advanced electronic control and motorisation.
Standard: 230 Volts monophase, optional: 3 phase - 230/400 VAC
Access control
The electronic control can be programmed to suit every project or special requirements of the customer.
A wide range of options is available: induction loop detection, photo-cells, key switch, RF-remote control, timer clock, card reader, key pad, coin receiver, parlophone, videophone.
Quality
Stainless steel housing, with polyester powder coated finish. complete with integral cast aluminium mechanical platform.
Electronic control enclosure IP54.
Polygone form aluminium arm, white plastic coated with red reflexion strips.
Ideal for
Specially for industrial surroundings and situations where access control is required.
|
|
Truly innovative shapes and uncompromising safety: these are the credentials of the new DITEC Qik barrier.
Soft edges, rounded corners, high performance and suitability for any type of installation environment.
Newly designed and technically advanced, Qik is the ideal solution for a totally safe access control of medium to high transit environments such as hotels, banks, shopping malls, as well as blocks of flats, companies and camp sites, which always require access control of car parking areas,
to ensure their use to authorised people only.
The new Qik barriers are available in grey and red or in stainless steel, the ideal solution for harsher environments such as areas near the sea.
The wide range of lengths and DITEC accessories available ensure that all installation requirements are met.
|
|
Truly innovative shapes and uncompromising safety: these are the credentials of the new DITEC Qik barrier.
Soft edges, rounded corners, high performance and suitability for any type of installation environment.
Newly designed and technically advanced, Qik is the ideal solution for a totally safe access control of medium to high transit environments such as hotels, banks, shopping malls, as well as blocks of flats, companies and camp sites, which always require access control of car parking areas,
to ensure their use to authorised people only.
The new Qik barriers are available in grey and red or in stainless steel, the ideal solution for harsher environments such as areas near the sea.
The wide range of lengths and DITEC accessories available ensure that all installation requirements are met.
|
|
Swivel skirted barriers are available in both torque motor and hydraulic models
FB Barrier (torque) up to 5500 metres
HB Barrier (hydraulic) up to 7500 metres
|
|
AUTOMATIC BARRIER:
PILOMAT BARRIER
Automatic barrier with survey system hurdle to encoder magnetic with reversal of the movement. In the respect of relative norm EN 60335-2-103 to the automatic barriers, PILOMAT BARRIER inverts its movement also during last the 5 centimeters of race.
Incorporated PARK centers them electronic 24V.
Second time opening 3.
Body in aluminum and steel. Slowing down in opening and closing.
The confection comprises the slab to bury, the telescopic auction from 4 meters and the adhesive ones for the auction.
Simplified installation: without necessity of regulating the motivatings force of balance or the positioning of the finecorsa.
Manual release with personalized key.
Possibility to connect a card of recharges and batteries pad (180 cycles)
|
|
KONE Doors provide a range of reliable and resilient traffic barriers.
The KONE traffic barrier range can be used for both high use multi-storey car parks and smaller sites. The traffic barriers are available with beam lengths of 2 to 7 metres.
For more information and a competitive quote contact us.
|
|
The barrier produced by DEA SYSTEM may be left-hand or right-hand thanks to its system composed by easily invertible levels. The three levers equipped bar block protects the motor against vandalism acts. A built-in limit switch allows sharp bar adjustement the emergency relase on the motor allows the opening of the bar in case of power failure. STOP is available in two versions: 4 meters and 6 meters. The barriers are provided with fixing plate and control board.
- Painted box with lock provided door
- Grease soaked gear motor
- Irreversible
- Key release system.
- Spring damping.
- Built-in limit switch.
- Half heavy duty or heavy duty (24 V DC).
- Built-in control board.
|
|
Electromechanical barriers with encoder. Ideal for intensive use.
|
|
|
Hydraulic operator for swing gates, leaf length up to 3,5 m, weight up to 800 kg, residential and apartment-block use
|
|
For passages of up to 3.75m.
Gard4 is the new, automatic street barrier designed for regular vehicular flows in both residential as well as multi-user settings. It features soft profiles, rounded edges to offset the sail-effect, and innovative shapes all included in a barrier which fits harmoniously in all environments.
|
|
BR-6
Hydraulic entrance
barrier.
Hydraulic barrier with cataphoretic
treatment and painted. Hydraulic
slowing down and control unit.
Max boom length 6,25 m. Left and
right opening version.
|
|
Electromechanical
entrance
barriers.
This barrier has a perfect movent
and can operate also in absence
of power supply thanks to the
possibility of inserting 2 back up
batteries, which could be
placed in the dedicated housing.
A 24 Vdc motor coupled with an
encoder ensures perfect controlled
boom movement. For boom up to
4 / 6 meters.
|
|
Barriers series "EURO" and Special
The lifting barriers of our series EURO are intended for access control on sites where the robustness is the paramount element.
Only or associated, barriers EURO can automate overpasses than 10 meters.
Their peripheral equipments allow them the integration of
Badge readers, remote controls, digicodes, biometric readers...
Cameras
Interphonie
Control with complementary stoppings (gates, rectractable bollards, harrows motorized, plates of stopping,...)
Barrier EURO comprises a control simple and robust, its automation also enables him to be easily controlled to your systems.
Its communicating interface makes it possible to you to reach remote maintenance and the telecontrol in order to still increase the security of the exploitation.
The barrier makes it possible to constitute security booths associated with a management by badge readers, controllers biometric, readers of number plates...
|
|
| ... products without information |
| |
|
|
