|
|
|
The SunGuard High Performance range of coated glass products combines solar control and low emissivity performance in a single product. SunGuard HP coatings have exceptional optical clarity, uniformity of appearance and excellent selectivity. SunGuard High Performance glass is durable and may be toughened, heat strengthened, bent and screen printed providing variety in building design.
|
|
|
Contemporary building technologies demand ever increasing standards of thermal insulation combined with appropriate levels of solar control. SunGuard High Selective products are designed to reflect specific wavelengths of solar radiation, ensuring that whilst most of the heat is reflected out of the building, the maximum amount of natural daylight is transmitted inside the building. The resulting energy savings for the heating, cooling and lighting provide improved design flexibility for the architect.
|
|
|
The SunGuard High Performance range of coated glass products combines solar control and low emissivity performance in a single product. SunGuard HP coatings have exceptional optical clarity, uniformity of appearance and excellent selectivity. SunGuard High Performance glass is durable and may be toughened, heat strengthened, bent and screen printed providing variety in building design.
|
|
|
continuous facades, covers facades in E glass several materials, vetrate to punctual implantation and autoventilate, solar control.
|
|
|
|
|
|
While satin-finish glass became a classic façade covering years ago, “decorated” glass is still less commonly. Of the examples that can be seen, some are extremely interesting and pleasing to look at. It was a natural development for Vitrealspecchi to offer solutions that optimise cost/benefit calculations for this sort of application. This glass is the fruit of the Vitrealspecchi’s collaboration with the architect Ivo Pellegri (decorative patterns) and Sipam (structural design) and it showcases the interaction of décor and technology. Stopsol Supersilver, for example, is a classic pyrolytic glass for solar control applications that’s been given special Vitrealspecchi etching treatment: in double glazing it interacts with a clear or satin-finish back pane to produce dynamic textures and certain striking effects also visible on large surface areas of glass at a distance.
Methods of assembly in double glazing units and the processes supported by the glass depend on the characteristics of the base materials used: Madras® etching does not alter performance characteristics but does extend aesthetic potential. Standard plate size: 2250 x 3210 mm, thickness: up to 12 mm.
|
|
|
In our plant, which is about 2.500 mq, we manufacture by means of completely automated benches following products: traditional insulating glass with a Venetian blind encapsulated within its two glass panes (Sombra do Sol) and isulating glass with structural silicone sealing which can be used to realize structured facades.
|
|
Luhta Headquarters, Lahti, Finland
Insulating glass, outside: Stopsol Supersilver Clear 6 mm, inside: K Glass, Low-E 6 mm
Vesa Huolmann, Arkaari Oy
|
|
|
Modern glass architecture places the highest demands on the materials, in terms of aesthetics as well as technology. With ipasol, architects and planners can realize their buildings using forward-looking energetic concepts without having to abandon transparency and a captivating visual appearance.
|
|
|
|
|
|
As their name suggests, solar control glasses help control the amount of solar energy that enters a building.
Solar control glasses save money by reducing the amount of energy used by heating and air conditioning systems and boost comfort levels inside the building by controlling indoor temperatures and light levels.
Solar control performance, as expressed by the glass' solar factor, will vary according to:
the quantity of heat absorbed by the glass
and the quantity of reflected heat.
Product range:
coloured Planibel body-tinted glasses;
Stopsol and Sunergy pyrolitic hard-coated glasses;
Stopray vacuum coated glasses;
Artlite silkscreen-printed glasses.
Reflective solar-control glazing
Reflecting glasses offer privacy and visual comfort
Multiple combinations of solar control and light transmission levels
Hard-coated glass (metal oxide coatings applied using a pyrolitic process)
Stopsol reflective glazing offers architects limitless creativity: a single glass can be used for all applications
Application: single glass - double glazed units - laminated glass - toughened glass - enamelled glass
Benefits
Reflective glasses providing privacy and visual comfort
Multiple combinations of solar control and light-transmission levels and various colours
Stopsol reflective solar-control glazing offers architects limitless creativity: one range can be used for all applications
The lifespan of the coating is the same as that of float glass
|
|
|
By introducing internationally advanced anti-bacterial coating in the surface of ACP, WILLSTRONG® anti-bacterial ACP is featured with the capability of controlling the activities and propagation of microbes and bacteria and even killing them ultimately. Tests by authorities verifies that 290,000 coliforms and Staphy Lococcus aureus implanted in the surface of ACP in advance, will decrease to at most 5000 pcs under the inside condition of 35 ℃ after 24 hours. Reduction rate reaches 98% according to national anti-bacterial standard for building materials JC/T897-2002. Moreover, the capability of killing bacteria of WILLSTRONG® anti-bacterial ACP will keep in the same level with the surface paint existed. WILLSTRONG® anti-bacterial ACP can make the environment much more clear and fresh,no harm to humankind.
|
|
OKAFLEX Flexible Light Control
Variable illumination, flexible room utilisation - OKAFLEX helps to precisely steer daylight.
OKAFLEX, the thermal protection glazing with integrated lamella jalousie provides as much sun protection as necessary and as much daylight as possible. Glare and sight protection are also adjustable. All systems have been checked for heat resistance, fogging resistance and permanent load. Additionally, OKAFLEX is distinguished by the following properties:
TSET till 0,8% possible and Ug-value up to 1,1 W/(m²K) | 0,19 Btu/(h ft² °F) is possible.
|
|
|
Alutherm® elements are light weight Alu/Alu Sandwich elements with rigid polyurethane foam used in the supporting core construction. Alutherm® elements are subject to DIN 4102 regulations and classified as Group B1- flame resistant building material. Versatile applicable and energy-saving.
|
|
Versawall® Factory Foamed Panel Systems
(outside USA: Foamwall®-I)
Often recommended for industrial applications, the CENTRIA Versawall Factory Foamed Panel System is also often used for low- and mid-rise buildings where style, economy, and good insulation values are important -- such as for shopping centers, schools, and warehouses. The Versawall System is especially well suited for high humidity conditions, highly insulated structures, and buildings where long spans are required. The Versawall Panel System is available as an embossed panel with a subtly striated exterior surface.
|
|
Versawall® Factory Foamed Panel Systems
(outside USA: Foamwall®-I)
Often recommended for industrial applications, the CENTRIA Versawall Factory Foamed Panel System is also often used for low- and mid-rise buildings where style, economy, and good insulation values are important -- such as for shopping centers, schools, and warehouses. The Versawall System is especially well suited for high humidity conditions, highly insulated structures, and buildings where long spans are required. The Versawall Panel System is available as an embossed panel with a subtly striated exterior surface.
|
|
Koolglass is a laminated glass EVASAFE with an insertion of a microphone-blind of the Venetian type.
It can be assembled in all the forms: rectangular, trapezoidal, circular, plane glasses or convex glasses.
KoolGlass stops radiation UV, thus limiting the deterioration of the colors.
It offers a solar protector of high performance by removing the dazzling, allowing a perfect visibility towards outside.
Gone up in glazing insulation, it decreases the temperature behind the glazings exposed until 10°C, Retardateur of effraction, Koolglass attenuates also the produced noises (average and high frequencies).
|
|
|
Akyver® Confort Plus incorporates a reflective coating of metal particles in its surface layer to reduce significantly the greenhouse effect. Please download all technical data about Akyver®.
|
|
The polycarbonate panel system MODULIT 520HC is a new product suitable for many multiwall vertical glazings. It offers the highest performances and enable a cost efficient installation. The main advantage of the product is represented by the 500 mm module, so that the product remains easy to move but allows to reduce material and time needed for the installation. The system is extremely versatile and suitable for a lot of applications such as vertical glazings, sheds, partition walls, ...
The UV protection, co-extruded on the panel external side, gives it a long and fit life. The honeycomb structure ensures a good load resistance and an excellent thermal insulation.
|
|
|
Politec MODULIT 338LP is a polycarbonate modular panel, Uv protected by co-extrusion on external side, mainly used for vertical or sloped glazings. The high thickness of 40 mm and the internal structure with diagonal ribs combine excellent mechanical properties and thermal insulation, allowing important energy and structure saving. Available in a large range of colours (also on client request), it is completed by simple aluminium profile or with thermal cut, EPDM gaskets and aluminium fixing hooks required to fix panels to the bearing structure. The module width (338 mm) together with aluminium fixing hooks allow panels to reach very good values of resistance to wind loads.
|
|
A new production technology for the almost unbreakable polycarbonate allows for a new trend:
The creation of large, transparent facades.
Automatic warehouses, logistic stations, offices and factory facades can now be created with Rodeca glazing elements in an impressive, fancy and economic way, of which several architectural prizes at home and abroad are giving proof.
|
|
PC panels with their formed coupling system are ideal for isolation and safety glazing in almost every branch.
They are made of the super-tough polycarbonate and with a co-extruded UV-longterm protection and a 10-year-guarantee.
|
|
| ... products without information |
| |
|
|
see the results for the following category :