|
|
OKAFLEX Flexible Light Control
Variable illumination, flexible room utilisation - OKAFLEX helps to precisely steer daylight.
OKAFLEX, the thermal protection glazing with integrated lamella jalousie provides as much sun protection as necessary and as much daylight as possible. Glare and sight protection are also adjustable. All systems have been checked for heat resistance, fogging resistance and permanent load. Additionally, OKAFLEX is distinguished by the following properties:
TSET till 0,8% possible and Ug-value up to 1,1 W/(m²K) | 0,19 Btu/(h ft² °F) is possible.
|
|
|
|
|
|
Willstrong® ACP consists of two sheets of aluminum compositing a polyethylene core in a continuous process, which represents excellent properties of 100% recycled material, superior flatness, light weight, extraordinary flexibility etc. With ranges of product, like standard ACP, high gloss, Willstrong® ACP supplies freedom of creation to designers not only on architecture buildings, signages, but also on industrial, and transportation field.
Dimension:
Panel thickness: 3mm, 4mm, and 5mm
Aluminum thickness: 0.21mm, 0.3mm, 0.4mm, and 0.5mm
Panel width: 1220mm (recommended), 1250mm, 1500mm
Panel length: up to 7000mm
Coating:
PPG Kynar500 PVDF 2-3 rolling, and polyester, in solid, metal, wood and marble imitation colors; high gloss, mirror, brushed and "anole" finishing; both in single side, and double sides coating.
Core layer:
Recycled PE and original PE, as well as non-combusitive PE.
Application:
Facade and roof of building; interial wall, partition, and ceiling; signage, and shop front; furniture and machinary covering; vehicle internal and external covering.
|
|
|
Alutherm® elements are light weight Alu/Alu Sandwich elements with rigid polyurethane foam used in the supporting core construction. Alutherm® elements are subject to DIN 4102 regulations and classified as Group B1- flame resistant building material. Versatile applicable and energy-saving.
|
|
Versawall® Factory Foamed Panel Systems
(outside USA: Foamwall®-I)
Often recommended for industrial applications, the CENTRIA Versawall Factory Foamed Panel System is also often used for low- and mid-rise buildings where style, economy, and good insulation values are important -- such as for shopping centers, schools, and warehouses. The Versawall System is especially well suited for high humidity conditions, highly insulated structures, and buildings where long spans are required. The Versawall Panel System is available as an embossed panel with a subtly striated exterior surface.
|
|
Versawall® Factory Foamed Panel Systems
(outside USA: Foamwall®-I)
Often recommended for industrial applications, the CENTRIA Versawall Factory Foamed Panel System is also often used for low- and mid-rise buildings where style, economy, and good insulation values are important -- such as for shopping centers, schools, and warehouses. The Versawall System is especially well suited for high humidity conditions, highly insulated structures, and buildings where long spans are required. The Versawall Panel System is available as an embossed panel with a subtly striated exterior surface.
|
|
Koolglass is a laminated glass EVASAFE with an insertion of a microphone-blind of the Venetian type.
It can be assembled in all the forms: rectangular, trapezoidal, circular, plane glasses or convex glasses.
KoolGlass stops radiation UV, thus limiting the deterioration of the colors.
It offers a solar protector of high performance by removing the dazzling, allowing a perfect visibility towards outside.
Gone up in glazing insulation, it decreases the temperature behind the glazings exposed until 10°C, Retardateur of effraction, Koolglass attenuates also the produced noises (average and high frequencies).
|
|
|
Akyver® Panel 40 mm provides excellent thermal insulation and is completely watertight when clamped into place. The extra thickness provides extra load capacity. It is the ideal product for cladding.
|
|
The polycarbonate panel system MODULIT 520HC is a new product suitable for many multiwall vertical glazings. It offers the highest performances and enable a cost efficient installation. The main advantage of the product is represented by the 500 mm module, so that the product remains easy to move but allows to reduce material and time needed for the installation. The system is extremely versatile and suitable for a lot of applications such as vertical glazings, sheds, partition walls, ...
The UV protection, co-extruded on the panel external side, gives it a long and fit life. The honeycomb structure ensures a good load resistance and an excellent thermal insulation.
|
|
|
Politec MODULIT 338LP is a polycarbonate modular panel, Uv protected by co-extrusion on external side, mainly used for vertical or sloped glazings. The high thickness of 40 mm and the internal structure with diagonal ribs combine excellent mechanical properties and thermal insulation, allowing important energy and structure saving. Available in a large range of colours (also on client request), it is completed by simple aluminium profile or with thermal cut, EPDM gaskets and aluminium fixing hooks required to fix panels to the bearing structure. The module width (338 mm) together with aluminium fixing hooks allow panels to reach very good values of resistance to wind loads.
|
|
Modular tongue-and-groove Panel in co-extruded multi wall polycarbonate (UV-protected on one side) - GUARANTEED 10 YEARS against ageing.
The simplicity of the joint and the panels' co-planarity make this an ideal product for walling, sheds and wall lighting.
|
|
A new production technology for the almost unbreakable polycarbonate allows for a new trend:
The creation of large, transparent facades.
Automatic warehouses, logistic stations, offices and factory facades can now be created with Rodeca glazing elements in an impressive, fancy and economic way, of which several architectural prizes at home and abroad are giving proof.
|
|
PC panels with their formed coupling system are ideal for isolation and safety glazing in almost every branch.
They are made of the super-tough polycarbonate and with a co-extruded UV-longterm protection and a 10-year-guarantee.
|
|
|
|
|
|
Willstrong® ACP consists of two sheets of aluminum compositing a polyethylene core in a continuous process, which represents excellent properties of 100% recycled material, superior flatness, light weight, extraordinary flexibility etc. With ranges of product, like standard ACP, high gloss, Willstrong® ACP supplies freedom of creation to designers not only on architecture buildings, signages, but also on industrial, and transportation field.
Dimension:
Panel thickness: 3mm, 4mm, and 5mm
Aluminum thickness: 0.21mm, 0.3mm, 0.4mm, and 0.5mm
Panel width: 1220mm (recommended), 1250mm, 1500mm
Panel length: up to 7000mm
Coating:
PPG Kynar500 PVDF 2-3 rolling, and polyester, in solid, metal, wood and marble imitation colors; high gloss, mirror, brushed and "anole" finishing; both in single side, and double sides coating.
Core layer:
Recycled PE and original PE, as well as non-combusitive PE.
Application:
Facade and roof of building; interial wall, partition, and ceiling; signage, and shop front; furniture and machinary covering; vehicle internal and external covering.
|
|
|
Alutherm® elements are light weight Alu/Alu Sandwich elements with rigid polyurethane foam used in the supporting core construction. Alutherm® elements are subject to DIN 4102 regulations and classified as Group B1- flame resistant building material. Versatile applicable and energy-saving.
|
|
|
|
|
|
With our Sandwich Wall, you can turn nearly any design into reality. Panels have many joint details and can incorporate false joints, providing limitless options for designers. The standard panels have roll formed sides and cut ends. Unique for Hunter Douglas is the Bi-modular Sandwich Wall with identical joints all-around creating a cassette appearance with insulating properties. A Hunter Douglas designed fully integrated and flush window and door system completes the insulated ‘total’ façade system. In addition, the concealed mounting system ensures that your design is what shines.
SANDWICH WALL
• Made to measure panels
• Up to 12 meters in length
• Standard widths but any panel module up to 1500 mm wide is available
• Choice of skin materials: aluminium, stainless steel, steel and copper
• Superior flatness
• Texture and formed skin shapes
• Total’ façade system including fully integrated windows and doors
• Dry sealed system
• Bi-modular joints, identical joint design at all four panel sides
• Foam or mineral wool core
• Certified fire performance (LPCB/FM/CWCT)
• Horizontal and vertical installations
• Unique, concealed mounting system
• For new build and over-cladding projects
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Kids Walls
Beginning climbers are getting younger every year. Kids climbing walls have become a very important part of education programs, and are a fantastic way to teach balance, coordination, problem solving, cooperation and improve upper and lower body strength.
|
|
The 1202 Kawneer system offers various depths of uprights and crosspieces to facilitate adaptation to all project constraints, from curtain cladding and semi-curtains, to plane panelled and faceted. The 1202 cladding has the advantage of no height limit.
Depending on requirements, the cladding can be equipped with French-style openings, fixed hinge windows, tilt/turn windows and windows with an Italian-style frame invisible from the outside.
|
|
The AA 210 is a quick installation modular curtain wall for vertical cladding.
The construction principle allows for significant reduction in the amount of time for installation on-site, in order to suit the pace of the main construction.
The modular cladding is assembled in the workshop using an industrial production method, which guarantees its waterproofing and acoustic performance once complete.
It can be combined with French doors, fire doors or concealed Italian openings.
|
|
|
The 1204 KAWNEER system allows the creation of curtain claddings, semi curtains, panels, faces and frame-surrounding facets, outlining each glass pane or panel of a hollow joint.
|
|
|
When accentuated sightlines are desired on the exterior of the building with minimal framing visible from the interior, Series 6000 is the product for your building. This system is "reversed" from the conventional curtain walls of today with the structural element of the wall to the exterior of the building with small trim caps to the interior. Gaskets are available with factory molded corners. Continuous horizontal gutters result in superior air and water performance. Glass is set from the interior of the building reducing field installation costs. The Series 6000 is available in a standard 3" wide x 6-3/4" deep offering but can be customized to the specific needs of any project.
|
|
|
|
|
|
1、Unitized Curtain Wall System:
Project: 6 Mort Street, Australia
The unitized curtain wall system is usually applied on the buildings which have a uniform exterior wall design. It can control and ensure the overall quality of the product; ensure the accuracy of installation; shorten the construction period considerably; provides "flexible skin" which enables the curtain wall to withstand building movement and thermal movement; provides an effective water drainage system and a pressure-equalized system.
2、Stick Curtain Wall System:
Project: North Tower Smaralind, Iceland Europe
The stick wall system can be used on any type of structure or exterior wall. These systems tend to work best on highly intricate or articulated wall designs.
3、Hybrid Curtain Wall System:
Project: Highline 23 Tower, New York
The hybrid wall system is best for use on buildings where a compromise between a unitized wall system and a stick wall system is required due to design or construction issues. It tends to use the better qualities of each to allow smaller, more manageable units.
4、Window Wall System:
The window wall system design is typically utilized on buildings where the structure conflicts with the exterior wall zone forcing the windows to run intermittently between floor slabs.
The window wall design achieves a reasonable amount of performance against air and water infiltration and does tend to surpass the curtain wall in acoustic ability (basically between floors).
|
|
The image of curtain walling is most often associated with substantial office buildings. Curtain walling systems enable large facades to be quickly and simply constructed and still allow for considerable expanses of glazing. However curtain walling sections can also be used as the skeleton for a glass enclosure, with little or no impact on the external appearance.
When the glass is structurally bonded to the aluminium section, the impact to the design is minimal, with sight lines typically as small as 52mm. The depth of the curtain walling will depend on both the vertical and horizontal size of the structure, but the sight line will remain constant.
|
|
MC Curtain Walling
Clean and narrow 52mm sight lines both horizontally and vertically
A single fully integrated suite to incorporate a flexibility of designs
Facades can be facetted to create more interesting shapes and sizes
MC trame is an innovative addition to the range, which emphasises the horizontal, or vertical lines by eliminationg the need for cover caps on the other.
These extrusions can be used to support silicone glazed roofs.
|
|
TANAGRA is a curtain wall making it possible to carry out many types of frontages, starting from a SINGLE structure: - Aspects grill, - Aspect weaves horizontal, - VEP (External Glazing Pareclosé), - VEC (Stuck External Glazing).
STRONG POINTS
Single structure:
Whatever the desired aspect of the curtain wall, the basic structure remains the same one.
Optimization of the rate of fall
Neat esthetics:
Many possible esthetics: aspect grill, horizontal screens, VEC, VEP, opening hidden, frontages with facets (+ou- 10°)
Time-saver of manufacture and installation:
The uplink/cross-pieces does not require any machining
Important glazed surfaces:
The depth of rabbet of 25mm makes it possible to assemble glazings whose 1/2 perimeter can reach the 7m
Thermo isolation and acoustics
Possibility of reinforcements steels
A palette exclusive with the touch sanded guaranteed 10 years
|
|
|
|
see the results for the following category : 
