|
|
|
locker room benches,Coat rail, pin join timber, with 4 coat steel hooks, 3 seat planks of 10 cm width, frame made of square steel tubing, 20 cm width backrest, dimensions: 2 m x 0,4 m x 1,7 m. All sizes at request
|
|
built up locker
attractive locker featuring AISI 304 stainless steel panel doors
Technical Details
Finishes: Blue Ral 5002
Finishes: Inox
Technical details about the pedestal
Measurements
W. mm: 415
D. mm: 500
H. mm: 1800
Weights and volumes
Gross Weight Kg: 27
Net weight Kg: 26
Volume Cbm: 0,373
Q.ty of packages: 1
Product information
Tipologia: Built up locker
N. vani: 1 compartment
Materiale struttura: first quality steel
Caratteristiche funzionali: includes shelf, 3 hooks on coat rail, towel hanger and umbrella holder, central devider and shoe allodgement on the bottom
Tipologia ante: Design doors: stainless steel doors an ashlar design
Materiale ante: AISI 304 Stainless steel doors
Serratura: provided with cam keylock, two keys availables as standard
Finishes: epoxy powder coated after heated phosphodegreasing processes and fixing in ovens at 200° C
Funzione: ideal for corporateimage or home and office environements
|
|
One-piece locker cupboard for inspection made of top grade steel, body in 1mm sheet steel, doors in 1mm sheet steel reinforced all the way up by 1mm sheet steel omega profile. Centred door in 1mm sheet steel, three-latch safety lock, universal key provided.
Locker doors open 180°, no removable hinges. Lockers ventilated from the bottom of the locker cupboard.
Welded frames, 10cm high, complete with adjustable jacks with ends coated in hard plastic.
Finish: 100% stove-enamelled epoxy.
Locker cupboards fully factory-assembled, delivered assembled and ready to use
Inside dimensions of lockers : Height 41.8cm; Width 43.5cm; Depth 45cm.
Door opening : Height 39.5cm; Width 30.3cm.
Dimensions : Height 195cm (including legs 12.5cm) - Width 90cm; Depth 50cm.
|
|
One-piece locker cupboard made of top grade sheet steel. Tops, bottoms and doors: 0.7mm sheet (reinforced by welded 0.7mm omega profile steel).
Rebated doors on pivots, with no removable hinge. Ventilation slots at top and bottom of each door.
Locker cupboards available as 1, 2, 3 or 4 columns.
Models on legs: welded frames, 15cm high, complete with adjustable feet with ends coated in hard plastic. Optional numbering of individual doors. Locker cupboards fully factory-assembled, delivered ready to use. Pressed steel name card-holder.
Finish: 100% stove-enamelled epoxy powder coated.
Dimensions: Column width: 30cm.
Models on legs: Height 180cm + legs 15cm; Depth 50cm. Ref: 126.11
Models without legs: Height 180cm; Depth 50cm. Ref: 126.12
Each locker cupboard has a shelf and a coat-hanger.
Concertina doors optional on this model.
|
|
Lockers made entirely (body and doors) of 10mm solid grade laminate, guaranteed moisture-resistant.
Quick assembly by bolting horizontal anodized aluminium profiles which hold the laminate panels of the floors, shelves and tops.
Continuous modular assembly (first module + following module) allows construction of free-standing furniture or complete sets.
Full-height self-closing hinges in anodized aluminium.
Stainless steel screw fittings.
The lockers rest on rectangular 50mm x 30mm anodized aluminium rails, supported by rustproof adjustable feet in glassfibre-reinforced nylon or set into a masonry plinth.
Dimensions: Height 185cm + legs 15cm; Depth 50cm Widths 30cm or 40cm per column.
Locker dimensions: Height 60cm; Depth 50cm; Widths: 30 or 40cm (between centres).
On legs or plinth.
|
|
Locker cupboards made entirely (body and doors) of 10mm solid grade laminate, guaranteed moisture-resistant.
Quick assembly by bolting horizontal anodized aluminium profiles which hold the laminate panels of the floors, shelves and tops.
Continuous modular assembly (first module + following module) allows construction of free-standing furniture or complete sets.
Full-height self-closing hinges in anodized aluminium.
Stainless steel screw fittings.
These lockers rest on rectangular 50mm x 30mm anodized aluminium rails, supported by adjustable rustproof feet in glassfibre-reinforced nylon or set into a masonry plinth.
Each locker is fitted with a shelf, a coat rail and a solid grade laminate vertical partition under the shelf.
Standard module dimensions : Height 185cm + legs 15cm; Width 40cm; Depth 50cm.
|
|
The lockers, modular from one to a thousand.
Conveniently modular, wall fitted or for creating new wall spaces, for the neat and tidy storage of the things needed here.
Plush and endlessly-modular spaces. Perfectly aligned, the silent and sliding doors protect your things with discreet transparency. On the sides, large mirrors amplify light and the environment.
Modular panels enhance the rear and become ambience. One, ten, a thousand surfaces that display a pleasant image of wellness.
There are already three lockers here, fitted together to create a great image of her, who through relaxation finds herself even more beautiful.
|
|
Quality in its least details
- Our cabins profit the 30 years of experience of Polyrey to the service of collective spaces. Their mechanical resistance and their durability are guaranteed by our exclusive attaching parts.
- The wardrobes and racks of Polyrey are resistant to the shocks and moisture. They are adapted to the intensive uses in communities.
More Polyrey
Longevity thanks to mechanical solidity:
We selected a powerful hardware (steel and stainless of high-quality) which combined with qualities of compact guarantee an impeccable installation for a long time to you.
An original decorative choice
|
|
|
Thanks to the wide range of elements available, here lies the answerto all locker room needs. The range includes single-component elements and others with dirty/clean separation options. All lockers are fitted with at least one internal shelf, a hanging rail, umbrella holder on the inside of the door, and lock or padlock. The range also includes multi-locker elements with 2-4-6-8-12 compartments.
|
|
We offer 3 different types of bench :
- wall mounted (for concrete wall only)
- wall & ground banc
- bench on feet
3 types of seat are available :
* PVC
* Exotic wood
* laminated timber
See our product data sheet for more information.
|
|
Pedestal Bench
Model LENOXPEDESTAL
* Tough, attractive solid plastic never needs painting, resists dents and scratches
* Impervious to moisture - lockers will not rust or delaminate
* Made from 30% post-industrial recycled HDPE plastic
* Durable, vandal resistant all-welded construction
* Wide range of lengths and colors
* 20 year warranty against rust, delamination or breakage under normal use
|
|
Bench Squares for changing cubicle, available with and without cappelliera.
The structure is in steel with treatment of cataphoresis and paint job to epoxy powders.
The sitting, the back and the cappelliera are in natural or dyed painted wood frassino wengè.
Sitting and back can be covered in ecopelle of varied colors.
The bench is supplied of piedini adjustable in order satisfying the imperfections of pavings.
It has been studied a modular system that allows varied assemblages (with or without cappelliera) of infinite dimensions.
|
|
Bench Squares for changing cubicle, available with and without cappelliera.
The structure is in steel with treatment of cataphoresis and paint job to epoxy powders.
The sitting, is in natural or dyed painted wood frassino wengè and can be covered in ecopelle of varied colors.
The bench is supplied of piedini adjustable in order satisfying the imperfections of pavings.
It has been studied a modular system that allows varied assemblages of infinite dimensions.
|
|
The bench of the series Design model squared with trapezoidal vase is produced with idrorepellente material MDW laminated Exterior more that it guarantees to the product resistance and quality.
The sitting can be entire in laminated or with pillows and coatings in ecopelle available in varied colors.
|
|
The benches of the series Design are produced with idrorepellente material MDW laminated Exterior more that it guarantees to the product resistance and quality.
The sitting can be entire in laminated or with pillows and coatings in ecopelle available in varied colors.
|
|
Metal Frame
Seat Made of Wooden Laths
Bench Fits Under Cupboard
Optional with Shoe Grill
Optional with Pull Out Seat
Optional Separate Bench
Optional Separate Bench with Back Rest
Single and Double Sided Bench Units
Optional Legs with Floor Fixing Part
Packaging: Flatpack in Carton
|
|
Flexible bench "Quadra Bench"
- Series of benches "Quadra" studied for a maximum of flexibility
- Comfortable Base out of slats of massive KOTO
- Steel Mounting protected by cataphoresis and adjustable feet out of PVC
- Different dimensions:
Small 76 X 44 X 45 cm
Large 76 X 76 X 45 cm
- Metal intermediate Connection
Small 36 X 52 cm
Large 62 X 52 cm
|
|
Bench Base for changing cubicle, available with and without cappelliera.
The structure is in steel with treatment of cataphoresis and paint job to epoxy powders.
The sitting and the back are in doghe of natural or dyed painted wood frassino wengè.
The bench is supplied of piedini adjustable in order satisfying the imperfections of pavings.
|
|
Innovation in the combination door locks for racks and wardrobes of cloakrooms.
DIGILOCK is the only lock of specific rack for the Clubs of Prestigious Sports, the Thermal spas, the HOT-TUBS and the Hotels in the whole world.
The users enter to a personal code to four digits to have access to their business!
Management of the Access with special electronic keys!
Lock of Temporary or Temporary use. They are conceived for the racks used successively by various customers during the day.
Lock of permanent use. Ells are specific for racks used by a single customer.
The direction has an Electronic Master key Personalized which enables him to open the racks in the event of lapse of memory of the code by the customer.
|
|
Oracode 660 M lock is easy to use. To get access, guests simply enter their unique code into the keypad and the lock gives both visible and audible signals that it's open. If they wish, guests can also use the keypad to change the original 6-digit code to a code they find easier to remember.
Stand-alone electronic locking system
Satin chrome finish
Autonome system
Removable core mechanical key override
Visible and audible feedback
1batterie 9V
Low battery indicator alerts staff
6-digit pushbutton code
Personalization of code
1000-event audit trail
Programming options:
- allows for limited card access to staff in restricted areas
- activates the lock in passage mode
|
|
Bipatères GS: round forms, robust construction, invisible screws and bolts, galvanized or color.
3 models with the choice:
- bipatère individual
- smooth of coat racks
- smooth of coat racks on laminated plate
Patères doubles made out of steel stretched diameter 6 mm, forged cold and assembled on stringer steel of high rigidity of section U 15x35x2,5mm coated with resin 100% polyester cooked with the furnace.
Mural fixing by support in invisible S. Visserie.
Cut of a biaptère: 95x45x30mm.
Distance between centres bipatères: 150mm.
Lengths of 60cm with 3m, by sections of 15cm.
Provided screws and ankles.
|
|
Frame in steel tube, square (30mm x 30mm) and rectangular (35mm x 15mm), coated in 100% stove-enamelled polyester resin.
Seat factory-assembled on plates, ready to attach to frames.
Lengths from 1.20m to 3m, in 15cm increments.
Dimensions: Height 32cm; Depth 36cm.
For concrete walls.
|
|
Frame in steel tube, square (30mm x 30mm) and rectangular (35mm x 15mm), coated in 100% stove-enamelled polyester resin.
Seat factory-assembled on plates, ready to attach to frames.
Lengths from 1.20m to 3m, in 15cm increments.
Dimensions: Height 44cm; Depth 36cm.
|
|
Hooks cold-forged from 6mm diameter drawn steel bar and mounted on a rail of high rigidity U-section (15mm x 35mm x 2.5mm) steel coated in 100% stove-enamelled polyester resin.
Steel wall fixings. Concealed screws.
Size of each coat hook: 95 x 45mm x 30mm.
Distance between centres of GS hooks: 150mm.
Lengths from 60cm to 3m, in 15cm increments.
Coat rail in coloured GS
|
|
Trapezoid aluminium coat hooks coated in 100% stove-enamelled polyester resin fixed to the back of a plywood rail.
Block aluminium fixings. 60mm x 45mm hooks on 90mm x 22mm plywood rail.
Distance between centres of hooks: 20cm.
Lengths from 60cm to 3m in 20cm increments.
Fixing, screws and wall plugs supplied.
|
|
|
|