|
|
Introducing MODULO, the newest and most innovative locker system in the world today.
MODULO is an electronic, secure and highly manageable personal storage solution. Based on it's cylindrical design, the revolving barrel is rotated to expose a large storage space that enables the user to store their personal belongings easily and securely.
It is the result of a unique manufacturing process and is patented throughout the world. Rows can be single or double sided. Lockers are assembled on legs, which adjust to the slope of the floor allowing space for easy cleaning.
Our unique rotating cylindrical design eliminates the need for hinged doors. Rotating modules are accessed by the user entering a personal identification number (PIN) into a keypad. Optional biometric fingerprint reader is available.
Once the user’s PIN is accepted, personal belongings can be placed into the locker module. The user then rotates the module 180° into the locked position.
Double-sided rows will take less floor space and allow more storage space within the locker room since the lockers are nested . MODULO lockers have a standard diameter of 410 mm and a combination of different heights per column is available to meet your specific requirements. |
|
Modulo is an innovative locker made of polycarbonate, cylindrical in form and with no door.
Each bank of lockers is driven by a porter. The porter is a control unit with a keypad. The keypad is used by the users to select a locker and by the employees to access special menu.
This locker is opens and closes simply by putting a finger on the sensor, thanks to our new Biometris® system.
You choose a locker and dial its number on the keyboard of the porter. The screen will ask you to place a finger on the sensor.
A tone will confirm that the fingerprint has been correctly saved.
When you return to open the locker, you simple go at the porter. You place the same finger on the sensor and your locker will automatically open.
The are many advantages :
· no more key stolen, lost or broken
· No more code forgotten
· No need to remember a code or even your locker number
NB : Biometris® does not aim at building fingerprints data base. The fingerprint is used as a key and no personal information is linked to it.
The fingerprints are erased as soon as the user leave the locker.
Private life is fully respected.
|
|
Made of 10mm laminate, the lockers are driven by a porter with a keypad.
After the user has put his belongings into the locker, he comes to the porter and dial the number of his locker.
The porter will then ask to enter a personal code, now the locker can be closed.
No key and no padlock, the user is free to enjoy his sport activity.
When he comes back to his locker, the user first go to the porter. He dials the number of his locker and is asked to enter his secret code.
When the code is dialed the locker automatically opens.
The porter can work alone or it can be connected to a computer. Our GALILEE software offers a lot of otion that will ease the life of the manager.
The lockers are sold in modular unit made up of flush-mounted columns forming a single unit. The door hinges are factory assembled and cannot be unhinged, they contribute to the aesthetics of the unit by highlighting the verticality of the columns.
Our lockers comply with the European standards EN 438, DEEE and RoHS.
20 colors available, please check our chart of colors.
|
|
Lockers made of strong 10 mm laminate panels.
Assembly of the body :
- Modular unit made of flush-mounted columns forming a single unit.
- The horizontal assembly sections connect the partitions to each other and hold up the horizontal panels (floor, sehlves and ceiling).
- the bottom panels are fixed to the body by fitting into a groove.
- No assembly of the body can be undone from an open locker.
- The body is riveted to a substructure made up of 2 rails supported by studs.
Door hinges :
- 2 juxtaposed sections, 1 fastened to the door, the other fastened to the partition, allow the door to pivot.
- they are factory assembled and cannot be unhinged
- they contribute to the aesthetics of the unit by highlighting the verticality of the columns
Choice of locks :
- key lock
- padlock
- coin operated lock
|
|
Modulo is an innovative locker made of polycarbonate, cylindrical in form and with no door.
Each bank of lockers is driven by a porter. The porter is a control unit with a keypad. The keypad is used by the users to select a locker and by the employees to access special menu.
This locker is opens and closes simply by passing your card / badge in front of the RF reader.
You choose a locker and dial its number on the keyboard of the porter. The screen will ask you pass your card / badge in front of the reader.
A tone will confirm that your card / badge has been correctly read.
When you return to open the locker, you simply go at the porter. You pass your card / badge and your locker will automatically open.
The are many advantages :
· no more key stolen, lost or broken
· No more code forgotten
· No need to remember a code or even your locker number
|
|
Saturn
E. Barber & J. Osgerby 2007
Coat stand in solid beech, colour varnished, with metal hooks.
Saturn is such a sculptural, cheerfully dancing object, you’ll hate to hide it under a bunch of coats. But Saturn by all means makes a perfect, if unusual, coat stand. Its generous wooden arches provide the ideal place to hang coats and jackets or perhaps a cap. Saturn is also equipped to handle formal occasions with grace: on every arch are two metal hooks to hang coats the conventional way on hangers. Whichever way you prefer – you have an eye-catching coat stand at your service.
Saturn is also available as stool. |
|
Wardrobe for fire station
- Especially studied for clothing of the sappers firemen.
- Many supports and accessories
- Possibility of a chest for the personal objects
- Width of 400 or 500 mm
- Height 2000 mm
- Depth 500 or 600 mm |
|
Resisto S 5000 - ideal cupboards "anti-vandalism" for the schools
- Very robust Cupboard with some 1,5 mm thickness especially convex doors
- Very large filing spaces makes it possible to arrange a full-face helmet
- Embedded and reinforced Doors
- Easy of access for the children
|
|
Closet series 8070
- System uninterrupted and flexible
- Hook with clotheshangers with system theft protection device
- Door hats and grill to arrange the shoes
- Racks with doors resistant to the shocks and equipped with key locks
- Possibilté from 5 to 15 racks |
|
Radius is a sophisticated, flexible alternative to traditionally designed storage. Refined looks, sculptured fronts and recessed side pulls underline this stylish storage solution.
Regardless of the media being stored, Radius responds with a clean, unified appearance that works aesthetically and dimensionally with every other series element. It also offers added flexibility via workplace towers, lockers, acoustic or custom fronts, interchangeable drawer sizes and unlimited custom colors.
Radius Series Workplace Locker. |
|
Wardrobe of racks ANTI-VANDALISME at special doors
- Special Construction of the doors convex forwards out of steel of 2mm thickness
- Embedded and very robust Hinge
- Possibility of 6 or 9 doors for a wardrobe of 1255mm height
or from 5 to 15 doors for a total height 1950mm
- Lock with key, codes or lock
- Mural Fixing |
|
Series "Style"
- Of Top-of-the-range completion
- Doors with opening to 180° with shock absorber of closing
- Ventilation postpones high and low
- Wardrobe from 1 to 5 superimposed doors
- Dimensions H 2100 X P 610 X L 410mm
|
|
Modular units that can be dismantled. They come in a variety of configurations and sizes.
From 2 to 6 doors high.
Ideal for schools, gyms, camp sites...
The CIMM pluses :
- Prime grade electro-zinc coated steel sheet, 1 to 2.5 mm thick
- Door with 2 folds per side welded on 4 points
- Numerical locks with or without fixed codes, with or without coin return boxes
- Full height continuous hinge
- Return spring which automatically closes the door
- Air vents with round perforations in the back panel
- These units can be dismantled (User-friendly Customer Service which provides spare parts)
- Adjustable legs
- Durable baked-on enamel finish. |
|
Cupboards racks monoblocs made out of sheet steel of first choice. Above, funds and doors: 7/10ème (reinforced by profile Omega 7/10ème welded).
Doors embedded in rabbet on pivot, indégondable. Hearing of partly high and low ventilation on each door.
For the models on feet: welded mountings, height 15 cm, provided with adjustable jacks with ends coated with hard plastic. Classification on each door in option.
Cupboards entirely assembled in factory, delivered ready with employment. Pressed label holder.
Painting: powder epoxy 100% cooked with the furnace. |
|
Racks made completely (body and doors) out of massive laminate d%u2019epaissor 10 mm, guaranteed in humid atmosphere. Fast assembly by screwing of horizontal anodized aluminum sections in which come s%u2019insérer the laminate panels constituting the floors, racks and upper parts. Assembly uninterrupted (column departure and following column) allowing the realization of pieces of furniture or complete batteries.
Hinges any height selfagrafantes out of anodic aluminum.
Screws and bolts stainless. The racks put back on anodic aluminum members of rectangular section 50 X 30 mm, supported by feet adjustable jacks out of nylon armed with glass fiber incorrodables or posed on a base in masonry.
For more information on the colors, the various models available..., do not hesitate to visit our Internet site. |
|
Cupboards monoblocs worth visiting made out of sheet steel first choice, body in 10/10ème, doors in 10/10ème reinforced on all the height by an Omega in 10/10ème. Carry centralized in 10/10ème, closing by safety lock 3 points, passes general.
Carry racks to opening to 180°, indégondable. Ventilation of the racks by the bottom of the cupboard.
Welded mountings, height 10 cm, provided with adjustable jacks with ends coated with hard plastic.
Painting epoxy 100% cooked with the furnace.
Cupboards entirely assembled in factory, delivered assembled ready with employment.
For more information on the colors, the various models available..., do not hesitate to visit our Internet site. |
|
Cupboards made completely (body and doors) out of massive laminate thickness 10 mm, guaranteed in humid atmosphere.
Fast assembly by screwing of horizontal anodized aluminum sections in which come to fit the laminate panels constituting the floors, racks and upper parts. Assembly uninterrupted (column departure and following column) allowing the realization of pieces of furniture or complete batteries.
Hinges any height selfagrafantes out of anodic aluminum.
Screws and bolts stainless. The cupboards put back on anodic aluminum members of rectangular section 50 X 30 mm, supported by feet adjustable jacks out of nylon armed with glass fibers incorrodables or posed on a base in masonry.
Each box is equipped with a rack and a bar with clotheshangers.
Standard dimensions of the columns: Height 185 cm + feet 15 cm - Width 30 cm - Depth 50 cm.
Also exist in version dirtying industry.
For more information on the colors, the various models available..., do not hesitate to visit our Internet site.
|
|
Clothes and luggage are safely stored in these lockers with a separate compartment is provided for valuables of personnel and guests. Spacious and secure.
Design
Steel construction of semicircular profiles and adjustable height bases. Clothes section with variable height coat rail. Valuables safe made of sheet steel, with lock. Sheet metal base, front and side sections of wire mesh.
Surfaces
Plastic powder coated
Tube frame anthracite grey, RAL 7016,
doors and side sections white aluminium
RAL 9076. Bespoke colours available as option.
Dimensions (mm)
External dimensions:
Base unit W 460 x D 540 x H 1820
Inside dimensions:
Safe W 390 x D 490 x H 245
Coat section W 360 x D 490 x H 1360
Mesh width 13 x 123 |
|
Racks consigns dismountable and flexible Meubles
by addition of additional elements.
From 2 to 6 superimposed doors.
Ideal for: Colleges and colleges, Halls sports, Camp-sites...
+ the CIMM:
- Electro-coated with zinc Sheet 1st choice, thickness from 1 to 2,5 mm
- Doors 2 folds per side welded with the 4 angles
- Judgment by numerical, fixed or variable combination door lock, with or without coiner
- Hinge indégondable welded onto all the height of the door.
- Return spring closing the doors after use (except series 1000).
- Ventilations by dorsal perforations.
- Design: dismountable cabinets (SAV simplified by supply of spare parts).
- Feet assembled on adjustable varnishes
- Completion enamels cooked with the oven. |
|
Modular units which can be dismantled. Ideal for residential flats, holiday lets, hotels....
The CIMM pluses :
- Prime grade electro-zinc coated steel sheet, 1 to 2.5 mm thick
- Door with 2 folds per side welded on 4 points
- Numerical locks with or without fixed codes, with or without coin return boxes
- Full height continuous hinge
- Return spring which automatically closes the door
- Air vents with round perforations in the back panel
- These units can be dismantled (User-friendly Customer Service which provides spare parts)
- Adjustable legs
- Durable baked-on enamel finish. |
|
We offer 3 different types of bench :
- wall mounted (for concrete wall only)
- wall & ground banc
- bench on feet
3 types of seat are available :
* PVC
* Exotic wood
* laminated timber
See our product data sheet for more information. |
|
Innovation in the combination door locks for racks and wardrobes of cloakrooms.
DIGILOCK is the only lock of specific rack for the Clubs of Prestigious Sports, the Thermal spas, the HOT-TUBS and the Hotels in the whole world.
The users enter to a personal code to four digits to have access to their business!
Management of the Access with special electronic keys!
Lock of Temporary or Temporary use. They are conceived for the racks used successively by various customers during the day.
Lock of permanent use. Ells are specific for racks used by a single customer.
The direction has an Electronic Master key Personalized which enables him to open the racks in the event of lapse of memory of the code by the customer. |
|
Bipatères GS: round forms, robust construction, invisible screws and bolts, galvanized or color.
3 models with the choice:
- bipatère individual
- smooth of coat racks
- smooth of coat racks on laminated plate
Patères doubles made out of steel stretched diameter 6 mm, forged cold and assembled on stringer steel of high rigidity of section U 15x35x2,5mm coated with resin 100% polyester cooked with the furnace.
Mural fixing by support in invisible S. Visserie.
Cut of a biaptère: 95x45x30mm.
Distance between centres bipatères: 150mm.
Lengths of 60cm with 3m, by sections of 15cm.
Provided screws and ankles. |
|
Bench wall/ground:
Consoles out of steel tube of square 30 X 30 mm and rectangular section 35 X 15 mm, bituminous mix of resin 100% polyester cooked with the furnace.
Sat assembled machines some on platinums, ready to fix on consoles.
1,20 m lengths to 3 m by sections of 15 cm.
Dimensions: Height 44 cm - Depth 36 cm.
For more information on the colors, the types of sitted or the various models available, do not hesitate to visit our Internet site. |
|
Mural bench:
Consoles out of steel tube of square 30 X 30 mm and rectangular section 35 X 15 mm, bituminous mix of resin 100% polyester cooked with the furnace.
Sat assembled machines some on platinums, ready to fix on consoles.
1,20 m lengths to 3 m by sections of 15 cm.
Dimensions: Height 32 cm - Depth 36 cm.
For concrete walls.
For more information on the colors, the types of sitted or the various models available, do not hesitate to visit our Internet site. |
|
Patères of form trapezoid out of aluminum coated with resin 100% polyester cooked with the furnace fixed by the back on stringer in lamellate-stuck. Fixing by blocking on support aluminum.
Patères 60 X 45 mm on stringer lamellate-stuck to 90 X 22 Misters.
Distance between centres of the patères: 20 cm.
Dimensions of 60 cm to 3 m by sections of 20 cm.
Support, screw and ankles provided.
For more information on the colors, the various models available..., do not hesitate to visit our Internet site. |
|
Patères doubles made out of steel stretched diameter 6 mm, forged cold and assembled on steel stringer of high rigidity of section U 15 X 35 X 2,5 mm coated with resin 100% polyester cooked with the furnace.
Mural fixing by support in invisible S. Visserie.
Cut of a bipatère: 95 X 45 X 30 Misters.
Distance between centres bipatères GS: 150 Misters.
60 cm lengths to 3 m, by sections of 15 cm.
Bipatères color, smooth enamelled ivory RAL 9001.
For more information on the colors available, do not hesitate to visit our Internet site. |
|
|
|
