|
|
Product name: MDF (plain/melamine)
Made in china
Size: 1,220 x 2,440mm
Thickness: 2-30mm
Density: +/-750kg/m ³
Face and back: sanded
Grade: MR/WBP glue
Formaldehyde: E2 class
Environment protection
Widely used for package, furniture manufacture, decorative firm, and building
|
|
The medium density fibreboard (MDF) is produced from the finest raw materials mainly high quality de-barked softwood. Can be supplied in various structures, paper faced one or two sides.
Compared to many other wood based materials MDF has a higher bending strength, a higher perpendicular tensile strength and excellent screw holding properties. The mechanical load bearing capacity and resistance of MDF are higher than those of conventional chipboard.
Better values are also obtained on swell behaviour. The medium density fibreboard is characterised by mechanical, technological and physical properties that are comparable with those of solid wood.
Characteristics
Optimum density profile
Excellent physical properties
Even fibre structure
Perfect surface quality
Application
Furniture making and interior fittings
Kitchen and bath furniture
Furniture backs
Folding elements
Drawer bottoms
Door skins
|
|
|
Fantoni MDF is made of "chips" of selected woods, which are washed and then refined by special metal discs which are able to separate the fibres without breaking them up. During these operations, any extraneous material is removed n order to ensure improved workability of the panel and reduced wear of metal tools. The fibres are mixed with resins and deposited in the form of a "mat" on a long moving belt: the entire mat goes through a prepressing operation to eliminate air prior to final pressing. The heat and pressure of this operation activate the resin which "binds" the fibres together to create the MDF panel. The Fantoni group is one of the major European producers of these panels.
|
|
|
Low-density MDF with fine sanded surface, particularly screwable core and excellent fire retardant properties. Suitable for industrial processing for interior decoration and furniture production. Can be refined with paper, melamine, laminate or veneer. The board is heat- and fire-resistant and has low formaldehyde emission (E1 class). The board is used in particular in public buildings such as hospitals, airports, rest homes, theatres, hotels, etc. Firax withstands extreme heat and fire and has several national and international test reports.
|
|
|
High-density HDF with fine sanded surface and excellent fire retardant properties. Suitable for industrial processing for interior decoration products and laminate parquet. Can be refined with paper, melamine, laminate or veneer. The board is heat- and fire-resistant and has low formaldehyde emission (E1 class).
|
|
|
High-density MDF with fine sanded surface, particularly screwable core and excellent fire retardant properties. Suitable for industrial processing for interior decoration products and furniture production. Can be refined with paper, melamine, laminate or veneer. The board is heat- and fire-resistant and has low formaldehyde emission (E1 class). The board is used in particular in public buildings such as hospitals, airports, rest homes, theatres, hotels, etc. Firax withstands extreme heat and fire and has several national and international test reports.
|
|
|
High-density MDF with fine sanded surface, particularly screwable core and excellent fire retardant properties. Suitable for industrial processing, more specifically products for decoration of rooms where fire safety is a premium. Can be refined with paper, melamine, laminate or veneer. The board is heat- and fire-resistant and has low formaldehyde emission (E1 class). The board is used in particular in public buildings such as stairways, reception rooms, hospitals, airports, theatres, hotels, etc.
|
|
|
High-density MDF with hard, fine sanded surface and particularly screwable core characterised by extremely low formaldehyde emission. Suitable for interior decoration where the emphasis is on the use of ecological products. Pure is made of 100% softwood and has no coarse fibres in the surface. Can be refined with paper, melamine, veneer, laminate or lacquer. The board is very easy to mill and has the same technical characteristics as MDF Standard.
|
|
|
Low-density MDF with hard, fine sanded surface and particularly screwable core characterised by extremely low formaldehyde emission. Suitable for interior decoration where the emphasis is on the use of ecological products. Can be refined with paper, melamine, veneer, laminate or lacquer. Pure is made of 100% softwood and has no coarse fibres in the surface. The board is very easy to mill and has the same technical characteristics as Fibrabel.
|
|
|
Standard high-density MDF with hard and smooth sanded, fine surface. Suitable for industrial processing for interior decoration and furniture production. The board can be refined with paper, melamine, laminate or lacquer, and is also suitable for use under load conditions. MDF Standard is made of 100% softwood and has no coarse fibres in the surface. The board is also very easy to mill and has low formaldehyde emission (E1 class).
|
|
|
Low-density MDF with hard and smooth sanded, fine surface. Suitable for industrial processing for interior decoration and furniture production. Can be refined with paper, melamine, laminate or lacquer. Fibrabel® is made of 100% softwood and has no coarse fibres in the surface. The board is very easy to mill and has low formaldehyde emission (E1 class).
|
|
|
Low-density MDF with hard, fine sanded surface and particularly screwable core, MUF glued. The board undergoes minimal expansion and swelling under high humidity conditions and is suitable for general, non-load-bearing applications in humid conditions. Umidax® Light can be refined with paper, melamine, veneer, laminate or lacquer. The board is made of 100 % softwood and has no coarse fibres in the surface. The board is very easy to mill and has low formaldehyde emission (A class).
|
|
|
High-density MDF with hard, fine sanded surface and particularly screwable core, MUF glued. The board is subject to minimal expansion and swelling in conditions of high humidity. Suitable for load-bearing applications in humid conditions, Umidax® can be refined with paper, melamine, veneer, laminate or lacquer. Umidax is made of 100 % softwood and has no coarse fibres in the surface. The board is very easy to mill and has low formaldehyde emission (E1 class).
|
|
FunderMax Organic Fibre Standard is our range of products for universal interior applications without special strength requirements.
These panels are type HB according to standard EN 622-2.
Organic Fibre Standard is unsanded and untreated on the top surface.
Raw blanks cut to size, sanding, special formats and special thicknesses on request.
|
|
| ... products without information |
| |
Onda HDF is an engraved high density wood fiber board. Onda HDF is ready to be varnished or lacquered. Onda panels are in size 3000x1220x19 mm and the design has been studied to gurantee the continuity of the wave when 2 panels are joined both on the long and the short side. The design repetition size is 300x244 mm.
Onda HDF can be delivered already surfaced with various materials like ecoleather, acrylic or pvc. In this case the size will be 2400x1220x19 mm again with the design repetition size 300x244 mm.
|
|
|
Marotte' innovative approach is endowing wall panels a sculptural dimension. Carving can be done on panels made up of different materials, which are then ready to receive various finished (lacquers, soft, varnished, etc...) The choice depends on the esthetics and desired effect. Whether for use in large-scale projects or simply as decorative elements, the panels are manufactured to respond to all possible demands of the creative process
|
|
|
Marotte' innovative approach is endowing wall panels a sculptural dimension. Carving can be done on panels made up of different materials, which are then ready to receive various finished (lacquers, soft, varnished, etc...) The choice depends on the esthetics and desired effect. Whether for use in large-scale projects or simply as decorative elements, the panels are manufactured to respond to all possible demands of the creative process
|
|
B-matrixgroup proposes a different concept for interior coating made in MDF
The classic three-dimensional machining of the panels is now enriched by a PVC coating with multiple finishes and textures. Washable, glossy and metallic effects allow you to decorate in a creative and dynamic style and finesse any environment.
The ease of application and the content weight of the panels enable you to adjust to any situations.
Then arises the need to customize the product in size and finish allowing an elegant and original application as an insert of furniture, frames for mirrors and whatever concerns the sector of furniture for interior design.
The entire collection is supplied in a classic lacquered finishes, gloss and matt, in all colors RALL or simply by allowing the application of a primer paint on the spot.
|
|
|
A novel exclusive product to have the walls, inspiring its own personality. It creates practical and decorativas possibilities.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
