Metal bollards

... CHAPELET STUDIO Dimensions Height: 1094 mm Diameter: 80 mm Materials: Steel+Cataphoresis / Stainless Steel Exotic Wood

VIC is a special shaped bollard, composed of a single shaped steel plate to create a particular effect of staggered lines. Atop a soft curve it closes the form. A base plate accommodates the dish bent and serves as an ...

The HI BOLLARD serves as both a bollard and a bike rack and is made in steel, 50/10 thickness. On the upper part of the bollard, there are 2 holes with a diameter of 20 and 30 mm. On ...

Pedestrian bollard with square shape made entirely out of steel sheets and provided on a square lower base support. The bollard’s shape and dimensions gives it dual-purpose as a seat. On request the bollard ...

Pedestrian bollard made from tubular steel, available in various sizes and heights. All models have a steel sheet upper plate and are available with base plate or extended for installation into concrete foundations. ...

Pedestrian bollard made of shaped steel sheet, with a square base with vertical and slanted grooves on two sides. POWDER COATED STEEL OR CORTEN STEEL FIXINGS: PRE-DRILLED FOR ANCHORS OR BELOW GROUND INSTALLATION

Height: 436 mm

Cubic-shaped bollard available in three versions: galvanized and powder coated steel, galvanized and powder coated steel and stainless steel, corten steel and stainless steel. LED strip lighting on request. F: BASE PLATED

Height: 1,096 mm

Pedestrian bollard in galvanized and powder coated steel tube with decorative element in powder coated cast aluminum. F: BASE PLATED OR EMBEDDED

Height: 1,148 mm

Pedestrian bollard in galvanized and powder coated steel tube with cylindrical decorative element in powder coated cast aluminum. F: BASE PLATED OR EMBEDDED

Height: 50, 80, 60 cm

Urban or anti vandalism bollards (height 500, 600 or 800mm) The FB C50 fixed bollards (or passive bollards) are devices capable of stopping a 3,5T vehicle at a speed of 32km/h (or 1,5T ...

Height: 60 cm

Removable urban bollard (height 600 mm) The FR bollard is a removable device used to block vehicle access Obstacle diameter - 275 mm Foundation depth - 300 mm Finishing: the bollard ...

Height: 70, 90 cm

High-security antiterrorist bollards (height 700 mm) The FB M30 fixed bollards (or passive bollards) are anti-ram devices capable of stopping a 7,5T vehicle at a speed of 48km/h (or ...

... the powder-coated steel and the mirror finish stainless steel is not only flattering to the eye, it renders the Zénith low bollards discreetly and naturally compatible with roadway legislation for alignment identification. ...

The essential bollard, meeting expectations as fully as possible. At its service, the outdoor material par excellence: galvanized steel. Raw and unalterable, it confers an industrial style and extreme resistance to the ...

Height: 105 cm

... challenge of creating the METIS© roadside bollard. This post goes beyond the traditional limits of the object, revealing an artistic bias and a sculptural and urban hybridization. The METIS© roadside bollard ...

Height: 105 cm

The BUZZ© Barrier is a parking bollard with a classic sleek shape. BUZZ© in 15 mm thick corten steel cut with a laser. All corners are softened, all welds carefully cleaned and sanded to remove all sharp edges. Weight: ...

Height: 900, 500, 700 mm

Painted square steel tube and sheet stainless steel body, 5 mm thick. Fully stainless steel removable system, locked by triangular key. On the retractable version, automatic reset system controlled by triangular key. Steel: Zinc ...

Height: 900, 500, 700 mm

... layers of wood stain. Stainless steel: Circular brushing. Plug for removable system, ø 124 and ø 178 mm. Bollards with height above ground of 1200 mm on request

Height: 900, 700 mm

... controlled by triangular key. Steel: Zinc coating then baked polyester powder coating. Plug for removable system for posts, bollards and barriers.

Description Cast iron bollard To be embedded or with a locking removable system. Height : 26 cm ( above ground ) Diameter : 22 cm Finish : Shot-peening + 1 metal-coating + 1 coat of primer + 2 ...

Description Steel base, diameter 11 cm. Steel head with an aluminium cap, diameter 7 cm. Terracotta version Concrete part (Ductal), Terracotta colour. Other colour on request. Stainless steel version Brushed stainless steel ...

Description Natural lacquered aluminium head. Body : aluminium section 8 x 6 cm Height : 100 ou 120 cm ( above ground ) Finish : 1 chemical etching treatment + 1 trimetallic phosphatation + 1 epoxy polyester powder coating. RAL ...

The R&R range also includes the robust Rough&Ready Bollards: These robust beams in FSC® hardwood or in All Black are combined with a solid galvanized steel or CorTen steel frame. The beams are covered on the top and ...

Open Bollards are open pillars that perfectly match CorTen Bicycle Racks. The Bollards are available in fixed and removable versions. The fixed version can be fitted with LED lighting, which can be installed ...

FRAME: FLAT BAR 15X60MM POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING

Height: 85, 90, 94, 89 cm

VERSIONS: FIXED, COLLAPSIBLE, REMOVABLE CASING: ROUND TUBULAR STEEL Ø76MM OR Ø121MM POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING

Height: 90 cm

FRAME: ROUND TUBE Ø76 COVER: ALUMINIUM ALLOY SAND CASTING RESISTANT AGAINST SEAWATER POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING

Height: 85 cm

Traditional and stable. This is Isac. A delicate, slightly conically shaped bollard, made of cast aluminium, does not deny inspiration from classical architecture. With its traditional design, it fits into historic ...

Height: 100 cm

Form and function. This is Lot. This smart bollard utilizes a simple L-profile in a unique way, finished with a simple top. Two cross-sectional sizes allow you to choose the right proportion for a variety of spaces. ...

Height: 105, 115 cm

... has found its perfect application in this bollard. The slim proportion and finely modelled shape following the popular Miela park benches. Installation in a row enhances the final effect of these unique bollards. ...

These heavy duty and extremely robust fold down bollards are market leading products in terms of access control in the public domain. Steel tube: ø 76 mm, protective stop to lay the bollard on the ...

Height: 120 cm

DDA complaint steel bollards are taller and have contrasting colours to ensure that they aid the visibly impaired to see them Total height: 1380 mm (excluding top cap). Tube: steel ø 60, ø 76, ø 90, ø 102 or ø 114 ...

Height: 120 cm

DDA complaint steel bollards are taller and have contrasting colours to ensure that they aid the visibly impaired to see them Total height: 1380 mm (excluding top cap). Tube: steel ø 60, ø 76, ø 90, ø 102 or ø 114 ...

Height: 100 cm

Metal antiparking pole from the urban product range of road restraints combining functionality and aesthetics. Product made out of metal. The metal structure is coated with ester-epoxy ...

Height: 80 cm

Antiparking pole made out of high-quality metal. The metal structure is coated with ester-epoxy zinc primer and is powder coated. These technological methods protect the metal from corrosion ...

Height: 40 cm

... sphere shaped parking restraint especially suited to limit unwanted parking on sidewalks with heavy pedestrian traffic. The bollard is made out of high-performance concrete and natural aggregate. The marble and granite ...

Height: 800 mm

Tap bollard in a simple and cylindrical shape built in galvanized iron plus oxiron or imitation corten. Top cap in stainless steel. Bollards built with interior and exterior anti-rust galvanized iron ...

Height: 500, 750 mm

High-range hydraulic automatic telescopic bollards (with box caisson) designed for intensive use, impact and vandalism high resistance. Automatic bollards built with a tubular structure (rod), in galvanized ...

Height: 500, 750 mm

Mid-range hydraulic automatic telescopic bollards (with box caisson) designed for intensive use. Automatic bollards built with a tubular structure(rod), in galvanized iron.The chassis and the guides ...

ABES Feeder-Bollard 300-2 is a cylindrical tube with a circumferential set-on ring in the top section as well as a hemispherical upper closure. Access to the internal circuit via a lockable door, including cable slide. – ...

ABES Bollard 024 is a cylindrical bollard made from cast aluminium with a cast recess separating the bollard optically from its top and a distinct cylindrical base. Mounting Removable ...

Specifications ABES Bollard 056 is a fully cylindrical bollard made from galvanised steel/stainless steel, including a circumferential groove and a slightly domed top. Mounting Removable with 3p-Technology, ...

Height: 800 mm

The Quadra II is the middle bollard within the Quadra series. The right angles in combination with its width and length of 190 mm give this bollard a robust appearance. Compared to Quadra I, the Quadra ...

Height: 900 mm

Height: 600 mm

Height: 600 mm

... mechanical retractable bollard. It requires no electrical connection, and is simply lowered manually. Strength : standard - 50 kJ, Vehicle of 1.5 tonnes at 30 km/h Warrantie : 2 years Advantages : - Easy to operate ...

Height: 600 mm

... Easy to maintain : Access to the drive without dismantling the bollard and intervention performed by a single technician. Few wearing parts to change. - French made Area of use : The bollard meets ...

Wide range of metal bollards available both in cast iron and alluminium. They are suitable for furnishing historical centre and much more places, they are zinc plated and polyester powder coated in grey ...

Wide range of metal bollards available both in cast iron and alluminium. They are suitable for furnishing historical centre and much more places, they are zinc plated and polyester powder coated in grey ...

Wide range of metal bollards available both in cast iron and alluminium. They are suitable for furnishing historical centre and much more places, they are zinc plated and polyester powder coated in grey ...

Height: 577 mm

Retractable power tower VM03 flip lid unit The flip lid supply unit VM03 is part of the New VMR retractable power tower for the distribution of energy and other complementary services, such as water, compressed air, data transmission ...

Height: 1,711 mm

The VM01 power tower is part of the retractable power tower family and is the solution for distributing, in total safety, electric energy and other services, such as water, compressed air, data transmission and sound systems. The unit ...

Height: 812 mm

The retractable supply unit VM04 is part of the retractable power tower family and is the solution for distributing, in total safety, electric energy and other services, such as water, compressed air, data transmission and sound systems. The ...

... countersunk head supplied. Reversible bollard (With double grooves or class 2 reflective tape). Fixed to be sealed in solid concrete dosed at 350Kg / m3 according to calculation note. Once sealed in its concrete block, ...

Steel semi-automatic bollard, manual lowering and smooth reassembly assisted by gas cylinder, automatic locking and unlocking by means of a triangle key. Galvanized box. Flat top with triangle print and 316L stainless ...

Bike Bollards are the ideal dual-purpose parking stands. They can be used to limit access to bike-only trails and parking areas while providing riders with secure parking. They can also be used as security and/or traffic ...

Height: 900 mm

Ideal barrier bollard for all situations where the bollard needs to be removed quickly and easily with the triangular key to be ordered separately. No key or similar is required in order to return the ...

Height: 80 cm

The cast iron decorative bollard for chain is used for marking traffic, parking, parks, alleys, sidewalks, monuments and terraces. Cast Iron Decorative Bollard Fixing: The street bollard ...

Height: 111 cm

The cast iron decorative bollard ifor chain is used for marking traffic, parking, parks, alleys, sidewalks, monuments and terraces. Street Bollard Fixing: The street bollard needs ...

Height: 80 cm

The cast iron decorative bollard is used for marking traffic, parking, parks, alleys, sidewalks, monuments and terraces. Cast Iron Decorative Bollard Fixing: The street bollard needs ...