|
|
Wall cladding made from ZINCALUME® steel is available in a range of attractive profiles. It is lightweight, versatile and attractive and has excellent corrosion resistance. Steel wall cladding products can also be used in the FireClad® Exterior Wall System for fire rated walling.
- Durable and strong
- Superior corrosion resistance
- Lightweight for easy handling
- Thermally efficient
- Available from an extensive network of suppliers
|
|
Tiles in perforated
aluminium sheet, 50x50 cm. Other dimensions upon request. Choice of RAL
colours: Ideal for indoors and outdoors.
|
|
Profile of cladding Bromo Armat Acistim
Steel is a material of reference in cladding. Bromo profits from the same quality of manufacture that the profile of Mauka.Bromo cover is in conformity with the professional rules of the claddings
Characteristics of the Bromo solution
The Bromo solution is available in 3 variations according to your localization. These characteristics relate to only the version to measure of the Panel Bromo 0,63 (in conformity with the professional rules of implementation). Technical opinion n° 3/03-390.
The ranges depend on the place and the installation requirements of the products.
The following table, faithful to the professional rules for manufacture and the implementation of the metal claddings, declines the ranges under the most current installation requirements.
|
|
The careful selection of materials and construction systems which will be used in specific buildings are factors that require special attention from designers. The construction, operation and conservation costs for every technical solution should be exhaustively analysed so as to optimise the economic effectiveness of the building.
In the long-term, the use of high quality materials will be seen as financially advantageous. The functionality and durability of the materials, the energy savings achieved by using the best combinations and the comfortable environment thus obtained are just a few of the reasons behind these decisions.
The advantages of the SKINZIP® system are many and very easily identified. The aim of this presentation is to show how SKINZIP® works and demonstrate its potential. Our technical services department will also be happy to provide any
|
|
TREWALL
Cladding and supporting system for ventilated facades
Trewall is an integral supporting system for buildings with ventilated facades; consists of modular steel elements which are anchored and suspended on the sole, they strengthen and rivets the primary structure and are at the same time a carrying system for the elements of the facade composition. This system allows anchoring any wall cladding. This allows the architect to be flexible and free to choose from materials, because he external revetment becomes only an aesthetic issue.
|
|
|
These systems provide high performance in terms of thermal and sound insulation and resistance to fire as well as in terms of shock resistance and in high humidity environments
|
|
|
The diversity and the quality of our multi-layer solutions steel thermo-acoustics allows a multitude of architectural combination while preserving the performances of heat insulation and acoustic with the claddings multi-skin.
|
|
|
|
|
|
Features
- Horizontal (FWDS-H) and vertical (FWDS-V) designs available
- A variety of reveal, thickness and profile configurations are available, providing design flexibility and options for exterior walls
- Concealed clips and fasteners plus dry gaskets and concealed sealants provide a clean, uninterrupted appearance while minimizing exterior dirt streaking and staining
- Factory foamed for dependable thermal performance
- Profiled and flat panels integrate with CENTRIA Formavue® window systems, and most glass wall and window systems
- Rainscreen Principle horizontal joinery provides superior weather resistance
- Pressure equalization achieved through vents along the panel length where required
- Factory-formed sheet metal flashing or extruded aluminum trim available
- Can be easily curved or formed
- Panel mitering permits clean, sharp corners, beam and column wraps
- Trimless ends
- Thermal break between face and liner
- Lightweight - easy to handle and install; less framing required
- Stainless, striated, smooth and embossed surface treatments available
Metal
- Standard - 22/26 gage [0.76mm / 0.48mm], 22/22 gage [0.76mm / 0.76mm]
- Optional gages available, consult CENTRIA
- G-90 (Z275) galvanized steel; optional stainless steel or aluminum available, consult CENTRIA
|
|
Riblok 300
Riblok 300 has been developed to meet the ever increasing demands for forecourt canopies where it is necessary to have clean soffit lines with a durable material providing long life with low maintenance requirements.
Success has led the product application being extended to utilization in fascias, soffit applications and vertical wall designs for industrial and commercial buildings. The finished installation provides a substantially flat façade. Whilst not designed as optically flat, the solution is architecturally pleasing and economically efficient when compared with other products.
|
|
|
S Profile is perhaps the oldest established corrugated profile and it is described and defined in BS 4868. This is a very shallow profile and is therefore not suitable for foot traffic, but is intended for close spaced purlins on relatively steep pitches. Since this is a symmetrical profile it is suitable for forming into smooth curves.
|
|
Features
- Horizontal and vertical designs available
- Concealed clips and fasteners provide a sleek exterior appearance with proven long-term performance
- Optional reveals of varying widths
- Factory foamed for dependable thermal performance
- Rainscreen Principle horizontal joinery provides superior weather resistance
- Pressure equalization achieved through vents along the panel length where required
- Factory-formed sheet metal flashing or extruded aluminum trim available
- Trimless ends
- Thermal break between face and liner
- Lightweight - easy to handle and install; less framing required
- Advanced Fluorofinish PVDF, metallic, and mica color coating systems are available in over 70 standard colors
- Optional Duracast textured finish in eight standard earthtones
Metal
- Standard - 22/26 gage [0.76mm / 0.48mm], 22/22 gage [0.76mm / 0.76mm]
- Optional gages available, consult CENTRIA
- G-90 (Z275) galvanized steel; optional aluminum face available, consult CENTRIA
|
|
Customised and modular systems
Planéa, Isofran, Promplan, coques MD, cassettes BS, ST Evolution 500-600-900 are cladding systems designed to enhance the surfaces of brickwork, concrete, or steel-sheet walls. Their characteristics may be adapted to new-build and refurbishment projects, to walls with openings.
|
|
Arclad offers a wide range of wall profiles in a choice of coatings and finishes to meet different budgetary, aesthetic and performance requirements.
The profiles can be used in a single skin construction or can be included as part of a built-up system including other components such as liners or structural trays. In this way, built-up systems can be designed to meet a range of thermal, fire and acoustic performance requirements whilst still offering a wide choice of aesthetic finishes.
|
|
Arclad offers a wide range of wall profiles in a choice of coatings and finishes to meet different budgetary, aesthetic and performance requirements.
The profiles can be used in a single skin construction or can be included as part of a built-up system including other components such as liners or structural trays. In this way, built-up systems can be designed to meet a range of thermal, fire and acoustic performance requirements whilst still offering a wide choice of aesthetic finishes.
|
|
This ribbed sheet has a corrugation of 20 mm height with a trough of 12 mm; because of this, the ribs are tight against one another without giving the impression of contraction.
The solid trough creates a plane support on which are reflected the light rays and a contact surface on which the shadow of ribs is in movement.
The TN 200 is ideal for decoration applications having a dominant linear appearance in a zone with variable lighting.
|
|
The NuWall® wall panel can be used for either new or retrofit construction. The concealed fastening system creates a clean, uninterrupted wall on the building.
Product Features:
- Coverage Width – 12”
- Panel Attachment – Concealed Fastening System
- Panel Substrate – Galvalume®
- Gauge – Standard: 24 Optional: 22
- Finishes – Standard: Smooth Optional: Embossed
- Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
|
|
Corrugated is a wall panel ideal for use for residential, light commercial, farm and ranch buildings, canopies and storage buildings.
Product Features:
- Coverage Width – 24”
- Panel Attachment – Exposed Fastening System
- Gauge – Standard: 29 Optional: 26
- Finishes – Standard: Smooth
- Coatings – Galvanized, Galvalume Plus®, Signature® 200
|
|
The structural and mechanical requirements, and also the aesthetic demands, for façades are different from those for roofs.
TECU® is ideal for producing visually attractive, durable and cost-effective claddings with a wide range of design possibilities, thanks to the available finishes, TECU®-Classic, TECU®-Patina, TECU®-Oxid and TECU®-Zinn.
|
|
Mesh up to widths of 2000 mm
Long Way: up to 300 mm
Short Way: up to 100 mm
Strand Width: up to 35 mm
Materials:
Carbon steels; pre-lacquered; galvanized; Stainless steel; aluminium; copper; brass, titanium; plastics....
Finishes and coatings:
lacquering (RAL colours; textured; other special products...)
Anodized: metallic / organic
Hot and cold galvanising.
|
|
DESIGNER: Arch. Benedetto Camerana
PRODUCTS: 250 sqm of frames protected by COR-TEN steel blades, glazed floors and balustrade for steel suspended stairs.
|
|
Rigidal Systems offers a wide range of structural liner trays.
In wall applications, trays can be used horizontally, replacing traditional sheeting rails spanning the portal frames of the building.
The shallow profile of the tray pan creates a clean, uncluttered finish to the interior of the wall. Also, the edges of the trays serve to support the insulation material thus preventing insulation 'slump' and consequent cold spots.
|
|
| ... products without information |
| |
|
|
