|
|
RHEINZINK® - Cassettes
The use of cassettes in curtain walls comes from the development of large components for quick and cost-efficient installation. These are large surface, elevated cladding. The four lateral edges are folded. RHEINZINK offers the option of having cassettes produced individually and project-specific. When installed on appropriate substructures, cassettes lend a futuristic, "technical" appearance to buildings. This installation system is very popular for administrative and commercial buildings.
|
|
RHEINZINK® - Tile Systems
RHEINZINK-tiles include flat-lock, square and diamond-shaped tiles. Flat-lock tiles are primarily used for large façade surfaces. This is where their visual impact is the most impressive.
The square and diamond-shaped tiles comprise the group of RHEINZINK-small tiles. Due to the small size of individual components, design solutions can even be found for geometrically complicated buildings. Among other things, traditional cladding of roof dormers, chimney heads or roof edges with small tiles is not a problem.
|
|
|
|
|
|
New Kalzip FC facade system
Innovatively and economically by the singular Vario Systemmontage with penetration-free transfer
The innovative, flexible Vario Systemmontage is the outstanding feature of the new Kalzip FC of facade system. The installation of the aluminum profiles can take place both into both directions, alternatively from downside upward or from above downward, and independently of adjacent panels in the midst of one front surface which can be installed. Thus the assembly becomes enormously economical. As given, building-lateral obligations can be coordinated as stand positions or connection work flexibly and independently of the assembly process.
The wide panels according to standard with head tilting and moved penetration-free without are offered to rivets or screws on raster clicking rails. The matured system considers all detailed solutions and as complete package inclusive sub-construction is offered. System-conformal hitting a corner training make a gentle and harmonious accentuation for building geometry possible and underline thus the esthetic total effect of the front.
Exchange of individual elements possible
The Kalzip FC facade system is in such a way designed that individual panels can be changed when damage simply and problem-free. The complex and expensive exchange of whole front surfaces is void. The behind-ventilated facade system is equally suitable for redevelopment and new building. It is similarly to the Kalzip roof system with different surfaces and a broad Farbpalette (colorcoated surfaces in all RAL and special colors) available.
|
|
|
Continuous louvre system blade (pitch 66mm): the largest of the small format louvres retaining good airflow characteristics whilst providing a substantial degree of weatherability.
|
|
Continuous louvre system blade (pitch 95mm): extra heavy duty profile with extra high air flow, primarily used for industrial applications
|
|
Continuous louvre system blade (pitch 33.3mm): generally used for smaller areas, feature shapes and curves
|
|
Reynobond® XXL, our 2000 mm wide aluminium composite panel, opens up broad new creative horizons for you.
Benefits include fewer joints, fewer cuts and reduced fabrication and erecting costs.
Reynobond® XXL is also perfect for combining with other 2000 mm wide façade products like glass.
|
|
FunderMaxExterior Alucompact 42 F with decors from the FunderMaxExterior collection are extremely resistant to fracture, large-format panels for cladding facades and balconies.
FunderMaxExterior Alucompact 42 F quality panels are duromer high-pressure laminates (HPL) as per EN 438-6, type EDF with extremely effective weather protection. The weather protective coating consists of double hardened acrylic polyurethane resins. They have a 0.42 mm thick aluminium strip underneath the decor layer on both sides. The aluminium strips give the panels extremely high tensile strength and rigidity. This enables the production of perforated balcony elements, or the spacing between the mounting points to be increased.
|
|
|
|
|
|
TECU® Brass is a new material – with a reddish golden surface for impressive new façade solutions using copper.
TECU® Brass is a CuZn15-grade copper and zinc alloy that has been specially designed for use on façades. Weathering changes the original reddish golden colour of the surface in a very lively manner, with each façade developing its own unique characteristics. After the initial matting, the surface takes on a greenish brown tone, which slowly turns greyish brown before evolving into a dark brown-anthracite colour. On sloping surfaces, a uniquely individual patina layer typical of classical copper surfaces develops.
TECU® Brass offers outstanding mechanical abrasion resistance, extremely high corrosion resistance and durability as well as excellent stability and material rigidity. The material can be easily cold-shaped and soft-soldered. Because of its special material characteristics, TECU® Brass is also well suited for large-area applications.
TECU® Brass is an ideal complement to the TECU® product range and can be perfectly combined with the other copper surfaces. TECU® Brass offers without exception all the familiar economic advantages of the TECU® brand name.
|
|
|
|
|
|
TECU® Oxid is TECU® copper that is specially treated in a patented industrial process in which TECU® strips are oxidised on both sides. With TECU® Oxid, the bright copper phase is bridged so that a uniform, dark brown oxidised layer is achieved even before the cladding is laid. This is not an artificial colouring process or coating, but rather an oxidised layer which is created from the surface of the copper itself. The surface further develops into the natural oxide layer in the course of weathering. The special manufacturing technology used produces lighter and darker shades of brown.
With TECU® Oxid, copper on buildings has a brown oxide layer right from the start. The material also has the same extraordinary properties of all other TECU® surfaces.
On exterior wall cladding, an initial appearance of grey-violet hues is possible. However, these colour variations disappear as the natural oxidation process progresses.
TECU® Oxid is ideal for architects, contractors and building owners who prefer this surface to the normal bright rolled copper. With its aesthetic colouring and in combination with other construction materials, TECU® Oxid always stands out from the rest.
|
|
|
|
|
|
TECU® Gold is a new material – with a precious golden surface for impressive new façade solutions using copper.
TECU® Gold is a copper and aluminium alloy. The original shiny golden colour of the surface goes through characteristic changes when exposed to normal weathering. After the initial matting, a golden and yellowish oxidation layer gradually emerges, and this changes over time into a soft golden colour. The patination processes do not give rise to any further intensive colouring on façade surfaces.
TECU® Gold offers outstanding mechanical abrasion resistance, extremely high corrosion resistance and durability as well as excellent stability and material rigidity. The material can be easily cold-shaped and processed using standard techniques. Because of its special material characteristics, TECU® Gold is also well suited for large-area applications.
TECU® Gold is an ideal complement to the TECU® product range and can be perfectly combined with the other copper surfaces. All the familiar economic advantages of the TECU® brand name apply without exception to TECU® Gold.
|
|
TECU® Panels like TECU® Profiled Sheets, are produced on roll formers or corner presses. The panels are assembled on site using the tongue and groove technique or by overlapping the panels. TECU® Panels are two-sided cladding elements with an end base, depending on the construction, in lengths of approx. 4,000 mm.
The panels can be assembled in various directions - vertically, horizontally or diagonally. There are three basic forms, depending on the constructional principle:
-Tongue and groove panels laid vertically as a level surface facade cladding
- Tongue and groove panels laid horizontally as a level surface facade cladding.
- Special panels with visible or concealed fixings, laid in various directions, with a level surface or overlapped.
|
|
|
|
|
|
Using a specially developed industrial process, TECU® copper sheets are patinated green on one side. This process causes an oxidised layer to form on the surface of the copper – a process similar to the natural patination that occurs over a long period of time when copper is exposed to atmospheric conditions. This is not an artificial colouring or coating process. TECU® Patina gives cladding the green patina colour typical of copper right from the start.
TECU® Patina does away with the waiting time otherwise necessary until the pitched surfaces eventually turn green as a result of the natural effects of weathering. Roofs, façades and rainwater systems have the green patina that is unique to copper right from the outset.
The special manufacturing technology used allows some colour variation in the individual sheets from light green to blue-green. Each sheet is unique. Although these differences can be seen just after installation, they soon become less noticeable on exposure to the elements.
The patina continuously changes and develops when exposed to atmospheric conditions. The resulting variations in colour are proof of just how natural the patina surface is.
TECU® Patina offers unique possibilities for demanding design solutions in modern architecture. The many prize-winning buildings that have been constructed using this extraordinary material are compelling evidence of its unique design potential.
|
|
TECU® Classic is the product name for traditional bright rolled TECU® sheets and TECU® strips. Initially, the material has the aesthetic qualities of the bright copper surface which, on exposure to the atmosphere, slowly changes to dark brown as the oxide layer forms and later develops copper's typical green patina layer on pitched surfaces.
The design and planning possibilities of TECU® Classic allow a continuous stream of new developments and innovative ideas in the world of today’s and tomorrow’s modern architecture.
|
|
|
The Modern Way to the Golden World. Copper is an ideal material for different kind of applications due its longevity, corrosion resistance and workability. It's easy to form, natural and environmentally friendly material for all kind of applications. Nordic Royal™ gives you these same special properties; with the golden colour! Nordic Royal™ is suitable for interior and exterior facades, roofs, decorative furnishings, elevator walls, fireplace hoods, door and window frames, door panels, decorative purposes, lamps and memorials.
|
|
Dark oxidized copper sheets and strips for building purposes
Nordic Brown™ has been developed in order to give a choice to architects. The dark oxidized surface is equivalent to the degree of natural oxidation obtained before the development of a green patina can be observed.
|
|
|
Nordic Cassette systems are designed for facades as well as ceilings and partition constructions in-house.
|
|
|
Flat copper sheets and strip used for building purposes are made of phosphor-dioxidised copper in various tempers, annealed, half hard or hard. The majority of copper roofing is undertaken in the long strip method using half hard temper.
|
|
|
The bright, shiny surface associated with freshly laid copper will not remain for very long when exposed to the environment. It is often thought, for a variety of reasons, to be a disadvantage to have to wait for the natural patina to form. Therefore this patination treatment method, Nordic Green PLUS™ has been developed.
|
|
|
TECU® System Shingles are large format copper cladding elements for roofs and walls that offer advantages in design and price. KME-manufactured shingles allow builders to cover façades, roofs and individual building elements quickly, easily and economically.
|
|
Rigidal manufactures an extensive range of aluminium and steel profiled cladding systems for use in a variety of roof, wall and lining applications. The range of trapezoidal and sinusoidal profiles together with secret fix lining systems provide the specifier and contractor with an unbeatable choice of cost-effective cladding solutions to meet the most challenging of performance specifications.
Creative building design often requires a softness of line and detail of feature that can't always be achieved with traditional profiled sheeting and flashing design. To meet this requirement Rigidal are able to offer both smooth and crimp curved options together with profiled closure pieces, flashings and mitred units.
|
|
Metallic fabrics, you enmesh flexible or rigid with multitude of forms and designs that allow to cover great outer surfaces, to create inner virtual spaces or simply to generate illusions visual combining light and color.
The stainless steel fabrics are very versatile as much in their applications as in their characteristics, with a great variety of models that can make in the measures that the project demands and use the more appropriate systems of anchorage for each application.
Outer closings of great spaces that combine esthetic and functionality in a same material. Applications for interiors, panelado of walls, division of spaces or subtle light filters.
|
|
COLORBOND® steel combines a great look with guaranteed quality to offer its customers an ideal, versatile solution.
Using the latest steel coating technology, COLORBOND® steel is specifically designed to withstand all types of weather conditions.
The COLORBOND® steel brand represents BlueScope Steel's range of pre-painted steel products for premium building markets. For over 30 years it has provided its customers unparalleled value and performance.
|
|
Surfaces: TECU® Zinn
TECU® Zinn (matt grey, tinned) is TECU® Classic that has been specially tinned and surface-treated on both sides to create a matt grey surface. The surface continues to develop further over time on exposure to the atmosphere. The result is a warm, matt grey colour which harmonises excellently with other building materials. TECU® Zinn is protected by patent and is available in TECU® strips and in a number of special formats.
This material gives architects looking to create a light, grey surface many interesting design possibilities. When using TECU® Zinn they also get all the technical advantages of copper, such as durability and workability in cold temperatures.
|
|
|
|
