|
|
Suitable for:
Wide surfaces, low pitch roofs, industrial and residential roofing.
Recommended for:
roofing
Minimum slope:
1 %
Standard production:
aluminium
prepainted aluminium
aluzinc
copper
titan zinc
stainless steel
Options:
Anticondensation felt
Antinoise felt
Technical features:
high load bearing characteristics
installation without perforation of the sheet
warrancy of watertight even in case of complete flooding of the roof
any length (production directly on site with mobile unit)
|
|
Snap-On Panels have been designed for use in roofing, mansard and fascia applicatios. Snap-On Panels are designed to be installed over a waterproofed solid substrate and a minimum 3:12 roof pitch. Snap-On Panels are to be factory roll-formed in continuous lengths. Maximum panel length is 45 feet and minimum panel length is 4 feet.
These panels are ideal for specification on applications where roof transitions are required. The simplicity of the pan design combined with corrective leveling provides superior flatness and allows for greater workability on site.
|
|
Redi-Roof is an architectural metal roofing system available exclusively from Petersen Aluminum Corporation. It is intended for application over a solid substrate with a minimum 3:12 roof pitch. Typical underlayments include plywood, nailboard insulation or equal. Panels are to be factory roll-formed in continuous lengths. Maximum panel length is 45 feet and minimum panel length is 4 feet.
Redi-Roof Panels feature an offset profile which adds strength and allows room for a hex head fastener. The clip, with its button punched design, insures an extra-snug fit. The one-piece design of the Redi-Roof Standing Seam allows for ease of installation.
|
|
The flat roof metal covering RIVERCLACK® is the solution, in industrial as well as in civil building, which complies with the latest architectural trends.
Thanks to its essential shape, aesthetic, constructive economies and outstanding technical properties, RIVERCLACK is the perfect balance between technology and appearance.
Riverclack is a concealed fixing standing seam roofing system, worldwide patented by ISCOM, and it’s the result of constant research and testing which have seen it used in pan-European large-scale projects for over twenty years.
Bringing together the structural performance levels of high tensile metals and truly innovative geometry, its unique drainage joint is guarantee of full waterproofing whilst its original fixing system allows an incredible installation speed, free thermal moviments and an electric and thermal break between the roof and the below structure.
The panels 550mm wide are manufatured in customized continuous lengths both in the factory and on site.
|
|
The RIVERGRIP® system is the standing seam metal roof covering for steep roofs.
Thanks to its essential shape, aesthetic, constructive economies and outstanding technical properties, RIVERGRIP® is the perfect balance between technology and appearance.
RIVERGRIP® ensures the full roof water-tightness without any seal or gasket. Its original fixing system allows an incredible installation speed, free thermal moviments and an electric and thermal break between the roof and the below structure.
RIVERGRIP® technical properties put it to the top of range and guarantee a high reliability.
The panels 600mm wide are manufatured in customized continuous lengths both in the factory and on site.
|
|
The Slimline® roof panel system offers a sleek contemporary profile ideal for residential applications. This system offers a concealed fastener attachment. Panels must be specified as: "striated" or "striated with minor ribs".
Product Features:
- Coverage Width – 16” and 12”
- Minimum Slope – 3:12
- Panel Attachment – Concealed Fastening System
- Panel Substrate – Galvalume®
- Gauge – Standard: 29 Optional: 26
- Finishes – Standard: Striated Optional: Striated minor ribs
- Coatings – Galvalume Plus®, Signature® 200
|
|
This profile panel is a water-shedding system and can be used for roofs and mansards only when installed over a water-proofed solid substructure with a minimum slope of 3:12 roof slope. The roof panel makes complicated transitions without the necessity of unsightly flashings by using transition filler. Slope changes from roof to fascia to soffit are made with one continuous pan and batten. A concealed clip securely locks the batten to the panel while allowing for expansion and contraction.
Product Features:
- Coverage Width %u2013 12%u201D and 16 1/2%u201D
- Minimum Slope %u2013 3:12
- Panel Attachment %u2013 Concealed Fastening System
- Panel Substrate %u2013 Galvalume®
- Gauge %u2013 Standard: 24 Optional: 22, 26
- Finishes %u2013 Standard: Smooth Optional: Embossed
- Coatings %u2013 Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
|
|
BattenLok® HS is a mechanically-field seamed, high strength structural standing seam roof system. It can be installed directly over purlins or bar joists. It does not require a solid substructure for support.
Product Features:
- Coverage Width – 16”
- Minimum Slope – 1/2:12
- Panel Attachment – Concealed Fastening System
- Panel Substrate – Galvalume®
- Gauge – Standard: 24 Optional: 22
- Finishes – Standard: Smooth Striated Optional: Embossed Striated and Smooth, or Embossed Striated with Pencil Ribs
- Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
|
|
| ... products without information |
| |
Rectangular (R) or square (Q) galvanised steel panels, thickness mm. 0,6-0,7.
Rectangular panel size: from mm 300x600 to mm. 600x1500, standard size mm. 300x1200 - mm. 600x1200.
Square panel size: from mm 300x300 to mm. 750x750, standard size mm. 600x600.
Powder painting 70-80 microns.
Standard col. Ral 9010.
Minimum air space overall dimensions: mm. 100.
Flexible use thanks to specially sized panels.
Access to the air space by upward pressure of the panels hooked to the J profile.
Sound-proofing:
horizontal, by the insertion of soundproof panels on the whole surface of the false ceiling.
Vertical: by inserting plaster/paper sound-proof baffles at the walls.
Acoustic absorption:
different holes (see table) are available to the purpose, making the false ceiling soundproof together with soundproofing materials: specially suitable is the black Soundtex "paper tissue" film that dramatically reduces reverberation time and noise levels in general (see acoustic certifications).
|
|
0.6-0.7-0.8 thick galvanized steel panels.
Maximum dimensions 600 mm in width and 2,500 mm in length.
Polyester powder paint coating at least 100 micron thick. Standard colours RAL 9010 and RAL 9006.
Corridor system H-100
Swinging display panels with open side gaps.
Corridor system P-100
Swinging display panels with side closing profiles
Sound-proofing:
horizontal, by the insertion of soundproof panels on the whole surface of the false ceiling.
Vertical: by inserting plaster/paper sound-proof baffles at the walls.
Acoustic absorption:
different holes (see table) are available to the purpose, making the false ceiling soundproof together with soundproofing materials: specially suitable is the black Soundtex "paper tissue" film that dramatically reduces reverberation time and noise levels in general (see acoustic certifications).
|
|
Rectangular panel ceiling systems are particularly suitable for large ceiling areas and corridors and will create a pleasant ambience.
The individual ceiling panels can be removed easily at any time, thereby enabling access to the ceiling void.
To find out more about the rectangular panel system series, select a system from the options above. These are classified by their suspension mode:
R-C Clip-in systems
R-H Hook-on systems
|
|
Tartan-grid systems are especially suited to large rooms in which longitudinal or transverse subdivision is desired.
Rectangular or square panels and commercial lighting systems in various designs and shapes offer a host of different options for the visual and functional design of such ceilings. The grid accentuation by crossing boxes and trim strips can be further emphasized by the use of appropriate colours. Extremely decorative highlights can be achieved by the use of pyramid-shaded and oversized panels. Partition walls of various designs can easily be situated, relocated and removed under trim strips. Longitudinal and transverse walls meet one another beneath a crossing box. This makes it possible to create any configuration of square or rectangular office spaces within a selected grid area.
To find out more about the tartan-grid system series, select a system from the options above. These are classified by their suspension mode:
K-H Hook-on systems
K-C Clip-in systems
|
|
R-H 200
Hook-on rectangular panel system with J-bars, square edged with 3 mm joint gasket.
Concealed GemaGrid subconstruction.
|
|
|
The Metl-Span CFI V-Rib wall panel is ideal for interior partition walls, exterior walls and soffit applications where a light vertical accent line is desired. The panel faces are a mirror image with both the interior and exterior sides profiled in the same longitudinal V-Rib pattern. Note: Not intended for exterior walls on cold storage buildings.
|
|
Versawall® Factory Foamed Panel Systems
(outside USA: Foamwall®-I)
Often recommended for industrial applications, the CENTRIA Versawall Factory Foamed Panel System is also often used for low- and mid-rise buildings where style, economy, and good insulation values are important -- such as for shopping centers, schools, and warehouses. The Versawall System is especially well suited for high humidity conditions, highly insulated structures, and buildings where long spans are required. The Versawall Panel System is available as an embossed panel with a subtly striated exterior surface.
|
|
Versawall® Factory Foamed Panel Systems
(outside USA: Foamwall®-I)
Often recommended for industrial applications, the CENTRIA Versawall Factory Foamed Panel System is also often used for low- and mid-rise buildings where style, economy, and good insulation values are important -- such as for shopping centers, schools, and warehouses. The Versawall System is especially well suited for high humidity conditions, highly insulated structures, and buildings where long spans are required. The Versawall Panel System is available as an embossed panel with a subtly striated exterior surface.
|
|
Bubble pannel
Made-to-measure
Polished stainless steel, white or black paint
Traditional system with rings or Japanese screen system
|
|
Organization, system, and quality furnishings make the work area in the private sphere attractive. The division from the living area is one theme as well as the individual adjustment to function and taste. raumplus offers solutions that not only allow you to work well, but also to live well. (Further and more comprehensive applications than those shown here are found in the BUSINESS area.)
System_ S1500
Panel Material_ Maple Aluminium Weave
|
|
Bubble pannel
Made-to-measure
Polished stainless steel, white or black paint
Traditional system with rings or Japanese screen system
|
|
Organization, system, and quality furnishings make the work area in the private sphere attractive. The division from the living area is one theme as well as the individual adjustment to function and taste. raumplus offers solutions that not only allow you to work well, but also to live well. (Further and more comprehensive applications than those shown here are found in the BUSINESS area.)
System_ S1500
Panel Material_ Maple Aluminium Weave
|
|
|
|
|
|
With our Sandwich Wall, you can turn nearly any design into reality. Panels have many joint details and can incorporate false joints, providing limitless options for designers. The standard panels have roll formed sides and cut ends. Unique for Hunter Douglas is the Bi-modular Sandwich Wall with identical joints all-around creating a cassette appearance with insulating properties. A Hunter Douglas designed fully integrated and flush window and door system completes the insulated ‘total’ façade system. In addition, the concealed mounting system ensures that your design is what shines.
SANDWICH WALL
• Made to measure panels
• Up to 12 meters in length
• Standard widths but any panel module up to 1500 mm wide is available
• Choice of skin materials: aluminium, stainless steel, steel and copper
• Superior flatness
• Texture and formed skin shapes
• Total’ façade system including fully integrated windows and doors
• Dry sealed system
• Bi-modular joints, identical joint design at all four panel sides
• Foam or mineral wool core
• Certified fire performance (LPCB/FM/CWCT)
• Horizontal and vertical installations
• Unique, concealed mounting system
• For new build and over-cladding projects
|
|
Panel of Cladding Viso Armat Acistim
The panel Viso sandwich combines the functions of cladding and heat insulation. It is composed outside an enamelled section, of insulating a polyurethane foam heart and of an interior slightly ribbed steel facing.
Characteristics of the Viso solution
These characteristics relate to only Viso to measure is manufactured in factory with the lengths required in accordance with the plan of calepinage. For the lengths higher than 8 m, to consult us. Technical opinion n°2/03-991.
|
|
Boldt Construction
Commissioned by Oscar J. Boldt Construction Company as the focal point of their new Southern Division Headquarters. The word "Boldt" moves in and out of focus as the viewer moves around the sculpture. Corten Steel 4'w x 12'l x 10'h
|
|
|
|
|
|
Petersen Aluminum Corporation has provided the “M” and “R” exposed fastener panels in the past and has now expanded its panel offerings even more. We have introduced the 7.2 Rib, the 7/8” Corrugated Panel, the 1/2” Corrugated Panel and additional coverage widths of the “M” and “R” Panel to the lineup. These profiles provide unmatched flexibility for use in roofing, wall, interior and linear panel applications in a cost-efficient yet architecturally attractive metal panel.
The 7.2 panel provides superior versatility in roofing projects with high wind load requirements and longer spans. This profile has been tested extensively per ASTM 1592 and has excellent negative load capability even for high-wind pressures.
The 7.2 Panel is available in a full range of gauges and materials, and provides a 36” wide coverage. It is ideal for roof slopes as low as 2:12, however, it can meet slopes of less than 2:12 in some applications. Contact the local PAC rep for projects with less than 2:12 slopes for product application assistan
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
