|
|
Coverings
The tiles are made of aluminium plates, 0.65 m thick, submitted to long life stove painting, available in 9 standard colours.
The dimensions of the laid surface is equal to 620x420 mm; in order to cover an area of m2, 4 tiles weighing 2.3 kg/m2 are required.
loft structure
Minimum slope for Prefa tiles:
- Up to 7 m of roof length = 12° (ca. 21%).
- From 7 m to 12 m of roof length = 14° (ca. 23%).
- Above 12 m of roof length = 16° (ca. 27%).
simple formation of the roof
Assembly on planking: the planking must be at least 32 mm thick.
It is advisable to use an asphalt paper without sandblasting as separating element.
Assembly on splines: the spline must be at least 30x50 mm. A distance of 419 mm is recommended between the main splines. The middle spline must not be omitted because it is used for supporting the snow guard.
|
|
Suitable for:
civil and industrial buldings and for old roof renewal
Minimum slope:
13 %
Standard production:
Prepainted aluminium
Prepainted steel
Copper
Available colours:
Terracotta red (mat)
Terracotta red "old tile" weathered finish (mat)
Sand (mat)
Sand "weathered finish" (mat)
Technical features:
high load bearing
length on demand
|
|
GERARD® MILANO is a Romance double roof tile which one meets in all the areas of France. Of share its form, it has a behavior reinforced with the inflection, it settles in mountain, it does not fear nor freezing, snow, hail, the tornadoes or UV.
Features:
Working length: 1.22m
Working width: 0.37m
Many elements with m2: 2.24
Slope minimum: 21%
Weight: approx. 7kg/m2
In nine and restoration, employs in surtoiture on shingle or asbestos cement, asbestos cement, light roofing and to weak slope, building individual or collective, in roofing mountain.
|
|
The ROMANCE GERARD® is a Romance roof tile or typical channel of the French areas. Its reinforced thickness and its contour ensure a remarkable rigidity to him. It settles seaside thanks to its coating aluminum-zinc, it does not fear nor hail, the tornadoes or UV. It is also produced flammée color.
Features:
Working length: 1.10m
Working width: 0.37m
Many elements with m2: 2.45
Slope minimum: 27%
Weight: approx. 8kg/m2
New roofings house, multifamily apartments, tertiary, trade, restoration of the roofings of shingle or plates asbestos cement, surtoiture, technical solutions weak inclined or weight of cover reduced, use in extreme climatic conditions
|
|
The GERARD® HERITAGE is a generic roof tile of form large mould with round nose. She imitates the current terra cotta roof tiles color terracotta, the thick slates in tail of slate-coloured beaver color nour. As all roof tiles GERARD® it manufactures with part of Zincalume steel covered with natural stone. They are installed on liteaux standards and screen under-roofing. They are soundproof, are due to UV, the tornadoes, hail. They are guaranteed 50 years.
Features:
Working length: 1.25m
Working width: 0.37m
Many elements with m2: 2.15
Slope minimum: 27%
Weight: approx. 7kg/m2
New roofings house, multifamily apartments, tertiary, trade, restoration of the roofings of shingle or plates asbestos cement, surtoiture, technical solutions weak inclined or weight of cover reduced, use in extreme climatic conditions.
|
|
The GERARD® CORONA is a roof tile punt which also imitates the roofing stones, sheeting planks. Its well marked veins make it possible to hold with the important loads of snow. It often settles in mountain, it does not fear nor hail, the tornadoes or UV. Of share its stone coating one can do without stops snows.
Features:
Working length: 1.25m
Working width: 0.37m
Many elements with m2: 2.15
Slope minimum: 27%
Weight: approx. 7kg/m2
New roofings house, multifamily apartments, tertiary, trade, restoration of the roofings of shingle or plates asbestos cement, surtoiture, technical solutions weak inclined or weight of cover reduced, use in extreme climatic conditions.
|
|
GERARD® SENATOR is a "roof tile" which imitates slates Eclipse color either the bituminous shingles or shingle in its Bark color.
This roof tile goes very well in surtoiture restoration to recreate an esthetics with identical roofings existances. It is also guaranteed 50 years.
Features:
Working length: 1.25m
Working width: 0.37m
Many elements with m2: 2.15
Slope minimum: 27%
Weight: approx. 7kg/m2
New roofings house, multifamily apartments, tertiary, trade, restoration of the roofings of shingle or plates asbestos cement, surtoiture, technical solutions weak inclined or weight of cover reduced, use in extreme climatic conditions.
|
|
GERARD® CLASSIC is a roof tile large steel moulds that one meets in all the areas of France. Of share its form with intermediate reinforcements, it has a behavior reinforced with the inflection, it settles in surtoiture in restoration and nine. she imitates the roof tiles of traditional aspect.
Features:
Working length: 1.25m
Working width: 0.37m
Many elements with m2: 2.15
Slope minimum: 21%
Weight: approx. 7kg/m2
New roofings house, multifamily apartments, tertiary, trade, restoration of the roofings of shingle or plates asbestos cement, surtoiture, technical solutions weak inclined or weight of cover reduced, use in extreme climatic conditions.
|
|
GERARD® AMBASSADOR is a roof tile punt which also imitates the roofing stones, sheeting planks, ancelles. It available in slated black, brown moderate and patinated out-of-date green. Its well marked veins make it possible to hold with the important loads of snow. It often settles in mountain, it does not fear nor hail, the tornadoes or UV. Of share its stone coating one can do without stops snows.
Features:
Working length: 1.25m
Working width: 0.37m
Many elements with m2: 2.15
Slope minimum: 27%
Weight: approx. 7kg/m2
New roofings house, multifamily apartments, tertiary, trade, restoration of the roofings of shingle or plates asbestos cement, surtoiture, technical solutions weak inclined or weight of cover reduced, use in extreme climatic conditions.
|
|
Metal roof tile Halny
Cover of roofing for the restoration and the new buildings, out of steel or copper. Light modular elements, simple Assembly, Aspect roof tile, Gamme supplements accessories.
The roof tile steel combines the advantages of the vat steel with esthetics and implementation the traditional of the roof tile. Lengths standards in stock in the trader, complete range of accessories of installation: Armat puts the system roof tile steel at the range of the craftsman.
>Esthetics Adapted to the residential one
>Paint with very high strength: Plastisol 200µ: ideal for the corrosive conditions including in seaside. Excellent scratch resistance.
>Lightness: Approximately 5 kg/m ². Ideal to renovate the roofings shingle or asbestos cement.
>Weak slopes: Slopes > 9%. Speed of installation: Pose in only once large elements up to 4,45 m ²
>Induced economies
|
|
Cover of roofing for the restoration and the new buildings, out of steel or copper: Light ultra modular elements, simple Assembly, complete Range of accessories, Poses horizontal.
With Halny Scala, armat reinvents the esthetics of the covers steel. This system based on an original form which evokes the roof tile punt poses perpendicular to the slope. A complete range of folded accessories of completion was developed especially for this product. Halny Scala makes conspicuous your cover and fulfills the architectural requirements of the moment.
|
|
Cover of roofing for the restoration and the new buildings, out of steel: Light modular elements, simple Assembly, Aspect roof tile, Gamme supplements accessories
The roof tile steel combines the advantages of the vat steel with esthetics and implementation the traditional of the roof tile. Lengths standards in stock in the trader, complete range of accessories of installation: armat puts the system roof tile steel at the range of the craftsman.
|
|
Metal roof tile Halny Romana
Esthetic profile for the residential one (for the restoration and the nine). Choice of colors, invisible Fixings, Poses simple and fast, Grande longevity.
The roof tile steel Halny Romana combines the advantages of the vat steel with the esthetics of implementation the traditional of the Mediterranean roof tile. In stock in certain traders, complete range of accessories of installation, puts the system roof tile steel at the range of the craftsman.
|
|
The steel panels-roof tiles with the smooth aspect adapt as well for the new buildings as for the restoration of old roofings.
These panels roof tiles offer a very good corrosion resistance thanks to the use of Aluzinc covered with various protective coatings of which a layer of Plastisol 200 microns, conceived especially for an aggressive environment.
Characteristics:
Great facility of installation
Roof with weak slope: starting from 6.2°
Usable in on cover (asbestos cement for example)
Perfect behavior with the wind (190KM/h)
3 colors: red/brown, black/gray, brown/black
|
|
| ... products without information |
| |
Artecta from International Slate Company srl, company leader in the lapideo field thanks to the famous Artesia brand, is the true roof in natural Slate. Four types of rest, various formats and 9 colors that are adapted to any climatic and landscaped requirement.
Artecta introduces technical performances of high level: the European norm has been gable second, it is not geliva and not scolorisce to the sunlight or because of the atmospheric pollution. A roof to highest esthetic value.
Certifyd company ISO 9001 and ISO 14001
Building in wood supplied from Pays System P.C.L.
|
|
|
ALTIVO PEDRAS's Black Slate and Grey Slate roof tiles are the best protection for your roof. Besides beauty, they are more durable and impermeable, require less maintenance and are less prone to the accumulation of fungus.
|
|
CUPA 12 is a grey slate with a smooth matt surface. This slate is noted for its exceptional consistency of thickness and surface appearance. Qualities that have made it a popular choice for large commercial projects. Split to an average thickness of 5 and 6mm.
ORIGIN:
La Campa Quarry. Folgoso del Caurel (Lugo), Spain.
In operation since 1972.
PRODUCTION:
15,000 tons/year.
FORMATS:
Rectangular, Square, Half Moon, Schuppen, Fischuppen, Sawed at 90º.
SIZE: (cm)
Between 20x20 & 60x30, according to formats.
UK: 30x20, 40x20, 40x25, 46x22, 50x25 & 60x30
Germany: 20x20 Half Moon, 25x25 & 30x30, 40x20, 40x25, 50x25, 60x30. Schuppen 24x19. Fischuppen 22x15 & 30x19.
|
|
CUPA 5 ist ein fein gewalzter grauer Schiefer mit rauer Struktur der sich bei einer Stärke von 5 mm und bei der Schiefer "Heavy" zwischen 7-8 mm ablösen läBt.
URSPRUNG:
Steinbruch Valdacal, Pusmazán (Orense) Spanien, seit 1996 im Abbau.
PRODUKTION:
10.000 tonen/jährlich.
FORMATE:
Quadratisch, Rechteckig, Halbmond, Raute, Schuppen, Spitzort, Spitzwinkel, Gesägt 90º, Rund.
ABMESSUNGEN (in cm)
Zwischen 20x15 (Schuppen) und 60x30, gemäB Format
Frankreich: 27x18, 30x20, 32x22, 40x30 Raute, 35x25 Raute und4 0x20 Rund
|
|
CUPA 13 is a blue black slate with a smooth surface. Split to an average thickness of 3.5 and 5mm.
ORIGIN:
Sotillo Quarry. Benuza (Leon), Spain.
In operation since 1995.
PRODUCTION:
9,000 tons/year.
FORMATS:
Rectangular & Rounded.
SIZE: (cm)
Between 25x15 & 50x25, according to formats.
|
|
CUPA 4 is a blue black slate with a smooth surface. Split to a thickness of between 3.5-5mm and between 7-8mm for the “Heavy” variant.
ORIGIN:
Armadilla Quarry. Benuza (Leon), Spain. In operation since 1968.
PRODUCTION:
30,000 tons/year.
FORMATS:
Rectangular, Fish Scale, Rounded, Cut Shoulders.
SIZE: (cm)
Between 22x16 and 50x25, according to formats.
UK: 50x25.
France: From 22x16 to 40x25. "CUPA d'Art" in format 30x20 and 32x22 (4.5mm and 8mm thickness).
Benelux: 25x15, 25x18, 27x15, 27x18, 30x20, 32x22, 35x20, 35x22, 35x25, 40x20, 40x22, 40x25.
Spain: From 22x16 to 40x25
|
|
CUPA 3 is a blue black slate with a very rough surface which contains non rusting metallic particles. This slate is split to a thickness of 3.5mm and 7-8mm for the "Heavy" variant.
ORIGIN:
San Pedro Quarry. San Pedro de Trones (Leon) Spain. Operating since 1892.
PRODUCTION:
20,000 tons/year.
FORMATS:
Rectangular.
SIZE: (in cm) Between 25x15 & 50x25.
UK: Heavy 30x20, 35x20, 40x20, 40x25 & 50x25
Ireland: Heavy 50x25
France: 25x15, 27x18, 30x18, 30x20, 32x22 & 33x23
Benelux: 25x15, 27x18, 30x20 & 32x22
Spain: 30x18, 30x20 & 32x22
A unique slate, known as Heavy 3 is produced in the Cupa 3 quarry and is specially produced for the Scottish market as an alternative to Ballachulish slate. Heavy 3 is also ideally suited to Ireland's landscape and Atlantic climate. For more information www.cupaheavy3.com
|
|
| ... products without information |
| |
|
|