|
|
|
Panel rolled out of glass wool covered on a face of a veil polyester. The good cohesion of glass wool ISOVER, associated with the veil, reinforces the mechanical resistance of BY COMFORT. Once positioned between the metal frameworks, it fills space perfectly, in accordance with the DTU 25-41.
|
|
Semi-rigid panel to unroll out of glass wool covered with a veil comfort with transverse marking all the 100 Misters is integrated into the systems Intégra Réno and Vario.
The products of range ISOCONFORT are particularly well adapted for an easy installation and rapid between rafters. They allow the maintenance of a board of air ventilated between insulation and the cover for the perenniality of this one. Thanks to marking, cutting is easy. Elasticity and rigidity guarantee a perfect adjustment with the frame.
|
|
|
Semi-rigid panel rolled out of naked acoustic performance, glass wool high, adapted to the system of partition-wall great height. Be integrated into the system of Technostar partition-walls.
|
|
|
URSA Acoustic Roll is a lightweight, non-combustible, unfaced glass mineral wool product used for sound insulation of lightweight metal stud partitions.
|
|
|
Rigid, fire safe stone wool board with high acoustic insulation perfomance. It is faced with a natural coloured glass tissue.
|
|
Rigid, fire safe stone wool board with high acoustic insulation perfomance.
Application
Impact sound insulation in intermediate floors. The product is used as a floating resilient layer underneath a floating concrete slab.
|
|
|
Semi-rigid, fire safe stone wool slab with high sound absorption insulation performance. It is faced with a natural coloured glass tissue.
|
|
|
Semi-rigid glass wool panel, covered on a face d%u2019un kraft paper vapor barrier.
|
|
VENTILATED, THERMALLY AND ACOUSTICALLY INSULATED PANEL
The panel is produced from biosoluble rock wool with EC marking and complies with EN 13162:2001 standards. It is made from mineral wool obtained from natural rock melting and spinning. It features high compression resistance, excellent thermal insulation and acoustic absorption, as well as a guaranteed resistance to ageing and chemical agents. The panel%u2019s rock wool is biosoluble, according to Note Q of European Directive 97/69/EC, implemented in Italy in 1998, and does not therefore constitute a health hazard.
|
|
|
COMPACT consists of a special waving fibrous structure, a on one side consolidated, hard surface and a singular coating for best plaster bond. A raster marking facilitates a cutting.
|
|
|
The Steinwoll Dämmplatte TOPA ACOUSTICS is on one side with a strainable, bright mat coated and had a special fiber adjustment for the noise protection. The edges of TOPA are chamfered.
|
|
|
|
|
|
The REPI SOUND panels are metallic panels with insulation made of mineral wool fit for the realisation of Roofs Coverings, Walls, Internal Division of industrial and civil building
The REPI SOUND panels are constituted of two trapezoidal or microgrooved metallic supports with interposed insulation of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports.
METAL SUPPORT:
The REPI SOUND panels are made of two trapezoidal, microgrooved or flat metallic supports obtained by cold-process profiling the sheet coils.
The materials which are used are:
- Galvanized Steel
- Prepainted Galvanized Steel
- Stainless Steel
- Natural Aluminium
- Prepainted Aluminium
- Copper
INSULATION:
The insulation is made of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports. The thickness of the insulation may vary from a minimum of 40 mm to a maximum of 300 mm with a density from 75 to 150 kg/cu.m.
PERFORMANCE AND TECHNICAL ASPECTS
The REPI SOUND panels belong to the category of fire-proof products and soundproofing and soundabsorbent products. The REPI SOUND panel obtains the soundabsorbent power thanks to its typical Perforated Sheet exposed to noise. Acoustic tests have attributed to the REPI SOUND panels values of RW equal to 32dB, 33dB, 35dB, which face the problems concerning noise reduction. In order to increase the soundproofing power, it is possible to produce a monolithic panel supplied with triple sheet, that is to say with a thin metallic sheet between two insulating layers.
|
|
|
Mineral Fibre insulation has a special pre-coating, allowing for faster application and also has a proven sound reduction of up to 3 dB.
|
|
Produced description
Rigid panel in rock wool to medium density not covered, for the thermal insulation and acoustic.
Applications
Isolation in interstice of partition-walls and perimetrali in gessofibra, cartongesso or tile.
Acoustic 225 contributes in meaningful way to the increment of the acoustic performances and antifire protector.
|
|
|
|
|
|
The REPI SOUND panels are metallic panels with insulation made of mineral wool fit for the realisation of Roofs Coverings, Walls, Internal Division of industrial and civil building
The REPI SOUND panels are constituted of two trapezoidal or microgrooved metallic supports with interposed insulation of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports.
METAL SUPPORT:
The REPI SOUND panels are made of two trapezoidal, microgrooved or flat metallic supports obtained by cold-process profiling the sheet coils.
The materials which are used are:
- Galvanized Steel
- Prepainted Galvanized Steel
- Stainless Steel
- Natural Aluminium
- Prepainted Aluminium
- Copper
INSULATION:
The insulation is made of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports. The thickness of the insulation may vary from a minimum of 40 mm to a maximum of 300 mm with a density from 75 to 150 kg/cu.m.
PERFORMANCE AND TECHNICAL ASPECTS
The REPI SOUND panels belong to the category of fire-proof products and soundproofing and soundabsorbent products. The REPI SOUND panel obtains the soundabsorbent power thanks to its typical Perforated Sheet exposed to noise. Acoustic tests have attributed to the REPI SOUND panels values of RW equal to 32dB, 33dB, 35dB, which face the problems concerning noise reduction. In order to increase the soundproofing power, it is possible to produce a monolithic panel supplied with triple sheet, that is to say with a thin metallic sheet between two insulating layers.
|
|
| ... products without information |
| |
ISO Blanket and ISO Blanket Pro are limp-mass solutions designed for the treatment of airborne noise. They differ in their STC (Sound Transmission Coefficient) in that ISO Blanket Pro has a bigger coefficient/performance due to its agglomerated fabrics.
The blankets perform as sound barriers when applied to ceilings, walls and floors. Their flexibility, thin design and high resistance make them easy-to-use materials. They are most effective when used in construction projects that involve several layers of different material.
Product Technical Information
ISO Blanket Pro STC: 36,8 Rw (dB)
Dimensions: 1x5m (8mm thickness)
1900-2000 kg/m3
Applications
Worship Houses, Home Theatres, Listening Rooms, Recording and Broadcast Studios, Post Production Studios, Lecture Halls, Distance Learning Rooms, etc.
|
|
|
dBred VIBRO WS is specially designed homogeneous elastomeric support systems for gypsumboard partitions. The semi-cylindrical modulation at their base, increases the deflection and improves the vibration protection. The inclined flaps of dBred VIBRO WS cover the fixing bolts on the base and prevent contact with gypsumboard.
|
|
|
Panel rolled out of glass wool covered on a face of a veil polyester. The good cohesion of glass wool ISOVER, associated with the veil, reinforces the mechanical resistance of BY COMFORT. Once positioned between the metal frameworks, it fills space perfectly, in accordance with the DTU 25-41.
|
|
|
URSA Acoustic Roll is a lightweight, non-combustible, unfaced glass mineral wool product used for sound insulation of lightweight metal stud partitions.
|
|
|
ABRIFLOOR® is an extruded polyethylene foam, ideally suited for use as an underlay for laminated parquet thanks to its heat and noise insulation properties. This underlay in 20 and 25 kg/m³ density and thicknesses of 2 and 3 mm is supplied in convenient rolls of 1 m and 1,20 m and lengths of 10 m, 15 m, 20 m, 25 m or longer strips for professional use.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
