|
|
|
Roof is the most exposed element of a facility. It should defy changeable weather conditions, assure water-resistance, and offer protection against cold in wintertime. Simultaneously it shall prevent overheating of the attic rooms in summer time and assure low level of transmission thermal losses in time of winter heating of attic rooms.
|
|
Produced description
Rigid panel in rock wool to double density, resistant to jam, calpestabile, not covered for the thermal insulation and acoustic.
Applications
Isolation to the upper wing surface of slanted and flat roofings (warm roof).
Slanted roofings: particularly indicated in the event of roofs in wood and ventilated where it brings a meaningful increment of the acoustic performances.
Flat roofings: it is recommended for applications in which the impermeabilizzazione it is realized with liners or bituminous girdles.
|
|
Produced description
Rigid panel in rock wool to high density, resistant to jam, calpestabile, not covered for the thermal insulation and acoustic.
Applications
Isolation to the upper wing surface of roofings flat (warm roof) and tilted.
Flat roofings: it is recommended for applications in which the impermeabilizzazione it is realized with liners or bituminous girdles also in case of absence of mechanical implantations (incollaggio).
Slanted roofings: particularly indicated in the event of roofs in wood and ventilated where it brings a meaningful increment of the acoustic performances.
|
|
|
Rigid rockwool panel of strong mechanical resistance. Domisol formwork is intended for the insulation of the first floors of or tertiary sector residential buildings in bottom of formwork. It is compatible with the carparks and the establishments receiving of the public (erp).
|
|
Produced description
Rigid panel in rock wool to medium density not covered, for the thermal insulation and acoustic.
Applications
Isolation in interstice of partition-walls and perimetrali in gessofibra, cartongesso or tile.
Acoustic 225 contributes in meaningful way to the increment of the acoustic performances and antifire protector.
|
|
Produced description
Rigid panel in rock wool to double density, not covered, for thermal insulation and acoustic.
Applications
Product specifically conceived for termoisolanti systems to coat.
The panel comes subordinate to an additional heat treatment that renders it suitable to the strict conditions of uses typical of the isolation from the outside.
The range of the spessori (till 24 cm) renders it ideal for the realization of buildings liabilities.
|
|
|
Rigid rockwool panel, not covered, of high mechanical strength. Rigid rockwool panel, not covered, of class of compressibility B. Solution for inaccessible roofings including the ways of circulation. Heat insulation support of sealing under heavy or mechanically fixed protector.
|
|
|
Semi-rigid panel rolled out of naked acoustic performance, glass wool high, adapted to the system of partition-wall great height. Be integrated into the system of Technostar partition-walls.
|
|
Semi-rigid panel to unroll out of glass wool covered with a veil comfort with transverse marking all the 100 Misters is integrated into the systems Intégra Réno and Vario.
The products of range ISOCONFORT are particularly well adapted for an easy installation and rapid between rafters. They allow the maintenance of a board of air ventilated between insulation and the cover for the perenniality of this one. Thanks to marking, cutting is easy. Elasticity and rigidity guarantee a perfect adjustment with the frame.
|
|
Produced description
Rigid panel in rock wool to medium density, covered on a having side with black mineral veil esthetic function, for the thermal insulation and acoustic.
Applications
Isolation of ventilated facades.
Panelrock F, being fireproof, meaningfully contributes to reduce the risk of propagation of the fire in the ventilation room.
|
|
|
Rigid, fire safe stone wool slab with high thermal insulation performance.
|
|
Rigid, fire safe stone wool slab with high thermal insulation perfomance. It is faced with a natural coloured glass tissue.
|
|
Rigid, fire safe stone wool board. It is faced with a natural coloured glass tissue.
|
|
Semi-rigid, fire safe stone wool slab with high thermal insulation performance.
|
|
|
Rigid, fire safe stone wool slab with high thermal insulation performance and load bearing capacity.
|
|
Very rigid, fire safe stone wool board with high thermal insulation performance and load bearing capacity.
|
|
Rigid, fire safe stone wool slab with high thermal insulation performance and load bearing capacity.
|
|
|
|
|
|
The REPI SOUND panels are metallic panels with insulation made of mineral wool fit for the realisation of Roofs Coverings, Walls, Internal Division of industrial and civil building
The REPI SOUND panels are constituted of two trapezoidal or microgrooved metallic supports with interposed insulation of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports.
METAL SUPPORT:
The REPI SOUND panels are made of two trapezoidal, microgrooved or flat metallic supports obtained by cold-process profiling the sheet coils.
The materials which are used are:
- Galvanized Steel
- Prepainted Galvanized Steel
- Stainless Steel
- Natural Aluminium
- Prepainted Aluminium
- Copper
INSULATION:
The insulation is made of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports. The thickness of the insulation may vary from a minimum of 40 mm to a maximum of 300 mm with a density from 75 to 150 kg/cu.m.
PERFORMANCE AND TECHNICAL ASPECTS
The REPI SOUND panels belong to the category of fire-proof products and soundproofing and soundabsorbent products. The REPI SOUND panel obtains the soundabsorbent power thanks to its typical Perforated Sheet exposed to noise. Acoustic tests have attributed to the REPI SOUND panels values of RW equal to 32dB, 33dB, 35dB, which face the problems concerning noise reduction. In order to increase the soundproofing power, it is possible to produce a monolithic panel supplied with triple sheet, that is to say with a thin metallic sheet between two insulating layers.
|
|
|
Mineral Fibre insulation has a special pre-coating, allowing for faster application and also has a proven sound reduction of up to 3 dB.
|
|
|
|
|
|
The REPI SOUND panels are metallic panels with insulation made of mineral wool fit for the realisation of Roofs Coverings, Walls, Internal Division of industrial and civil building
The REPI SOUND panels are constituted of two trapezoidal or microgrooved metallic supports with interposed insulation of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports.
METAL SUPPORT:
The REPI SOUND panels are made of two trapezoidal, microgrooved or flat metallic supports obtained by cold-process profiling the sheet coils.
The materials which are used are:
- Galvanized Steel
- Prepainted Galvanized Steel
- Stainless Steel
- Natural Aluminium
- Prepainted Aluminium
- Copper
INSULATION:
The insulation is made of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports. The thickness of the insulation may vary from a minimum of 40 mm to a maximum of 300 mm with a density from 75 to 150 kg/cu.m.
PERFORMANCE AND TECHNICAL ASPECTS
The REPI SOUND panels belong to the category of fire-proof products and soundproofing and soundabsorbent products. The REPI SOUND panel obtains the soundabsorbent power thanks to its typical Perforated Sheet exposed to noise. Acoustic tests have attributed to the REPI SOUND panels values of RW equal to 32dB, 33dB, 35dB, which face the problems concerning noise reduction. In order to increase the soundproofing power, it is possible to produce a monolithic panel supplied with triple sheet, that is to say with a thin metallic sheet between two insulating layers.
|
|
Technical Insulation consists of specially developed insulation products for use in Heating Ventilation & Air-conditioning (HVAC) applications and industrial processes used in power stations, petrochemical plants, refineries, food and drink production facilities. These applications require a winning combination of thermal, acoustic and fire protection insulation.
Knauf Insulation high-tech glass mineral wool and rock mineral wool fits your requirements with a high degree of flexibility. Our high-performance insulation products offer the opportunity to gain process control as well as energy loss reduction, fire protection and acoustic sound reduction.
At Knauf Insulation, we provide a wide range of HVAC products for the mechanical engineer and contractor.
Main Technical Insulation applications:
Industrial Process Plant (Power & Petrochemical Plants)
Heating, Ventilation and Air-conditioning (HVAC)
Machine Insulation
|
|
Rigid, fire safe stone wool board with high thermal insulation and alkali resistance performance.
|
|
Rigid, fire safe stone wool lamella with high thermal insulation and alkali resistance performance.
|
|
|
Rigid, fire safe stone wool board with high acoustic insulation perfomance. It is faced with a natural coloured glass tissue.
|
|
|
Semi-rigid, fire safe stone wool slab with high sound absorption insulation performance. It is faced with a natural coloured glass tissue.
|
|
Rigid, fire safe stone wool board with high acoustic insulation perfomance.
Application
Impact sound insulation in intermediate floors. The product is used as a floating resilient layer underneath a floating concrete slab.
|
|
|
|
|
|
Knauf Insulation stone wool (also known as rock mineral wool) is branded as Heralan®, KnaufRock®, Nobasil®, Rocksilk®, Tervol® and finds its way into thousands of residential and commercial buildings as well as into industrial and OEM applications.
This material is also having an excellent combination of thermal, acoustic and fire insulation properties. Knauf Insulation stone wool products protect you from heat, noise and fire, providing you with:
Thermal insulation: energy efficiency in buildings is a key point to choose your insulation material. The heat conductivity is measured by the y factor where a lower value means a better thermal insulation. Stone wool is reducing the heat loss, which has a positive impact on energy efficiency and thermal insulation. Therefore it is important to apply materials in a way to avoid the condensation of water vapour in the construction, because it deteriorates the quality of insulation.
Acoustic insulation: sound is the result of the vibration of particles in an elastic environment. To ensure a quiet and relaxing atmosphere, Knauf Insulation stone wool is protecting you from air and impact sounds. The higher the acoustic absorption, the better the acoustic insulation. The acoustic elasticity properties of Knauf Insulation stone wool ensure a top-level acoustic performance. Fire protection insulation: Knauf Insulation stone wool is non combustible, which makes it perfect for fire protection.
|
|
|
|