|
|
Openside
Design:Franco Poli
Modular 1, 2 and 3 seater sofas and benches. Load carrying
steel frame,upholstered and soft leather covered with
or without integrated seat cushion. |
|
Sofa. Wooden frame covered with polyurethane foam
and dacron. Base in “Silk finish” brushed anodised
aluminium. Fabric or leather covers. Cushions in
down.
|
|
TUFTY-TIME
Modular sofas
Design Patricia Urquiola (2005)
Tufty-Time is not only a re-interpretation of the past, but also an excellent, innovative solution for such issues as modularity, comfort and removable covers. Tufty-Time is an informal system, with free and versatile composition possibilities. The modular system is made up of an ottoman, the basic unit, which can be matched with other central, corner and end units with high or low armrests. These elements form traditional sofas, chaise longue sofas, corner sofas and island elements a 360° seating solution. Especially welcoming in the greater-depth version, Tufty-Time becomes a meeting place, or a cosy refuge where to relax. |
|
The concept of modular sofa, developed into several typologies, is newly rendered with Luis, a solution that skilfully combines comfort and elegance.
Well-balanced masses, moderate proportions and an extremely soft look accompany a wide range of composition options that can easily fit spaces of quite different sizes.
Two are the seat depths (cm 62 and cm 78, three the widths (cm 62, 78, 94), and two the height variants for backrests and armrests. The system consists of sixty modular elements, enriched by pouf and chaiselongue, which allow to create a countless number of combinations to form linear, corner and peninsula sofas. From the aesthetic point of view, Luis is marked by a structure based on the floor and particularly large cushions, whose softness spreads also over backrest and armrests. Throw pillows measuring cm 60x60 and cm 48x48 enable to customize the seat depth. The Luis system is completed by accessories |
|
This project allows the use of a single sofa and to transform it in a sofa set with the possibility of a table top between the seats.
Armchairs, stools and sofas with frame in steel tube and elastic bands, back and arms in wood, upholstery in cold processed polyurethane foam and Dacron. The final cover can be completely slipped off. Approaching the modular elements it is possible to hide , under the seat structure the table top thanks to a system of aluminium casting levers, partially or completely.The hiding table top can be in glass, wood or lacquered. |
|
Line of approachable elements with structure in bent plywood and elastic bands, upholstered with polyurethane foam.
Optional pillows in down. The final cover can be completely slipped off. |
|
Tangram is a modular furnishing-system . More than 20 separate modules that can be rearranged, replaced or interchanged easily into various compositions.
Single or 2 seats sofas with frame in polyethylene rotationally moulded, elastic bands. Upholstered with polyurethane foam and dacron. It is possible to fix on the seat elements the armrests in different dimensions, extensions on the seats and pouffs. All the elements of the collection have the feet with an antiskid system.
The final cover in all the fabrics or leathers of our range can be completely slipped off. Some soft quilts, filled with Rollofill, in different dimensions are the option for the seats, for the backs instead some feathers cushions.
The line is completed by the coffee tables in lacquered wood an the benches in oak with the finishing of our range. |
|
A collection composed of single and sectional innovative sofas, charactenzed by a system of independent pouffs, separated from the main structure.
This device let the seaters slide ahead, changing the sofas function which include the chaise longue, dormeuse and bed configuration. Wood and steel frame filled with coupled fleece lined expanded polyurethane.
Seater pillows in polyurethane lined with cotton cloth coupled tecnoform.
Back cushions in down feather with non-deformable foam inserts.
Dyed wood feet available in silver, wenge, cherry-wood and bright walnut.
|
|
| Modular seating elements with wood and metal frame, multi-density polyurethane foam padding, cushions in feather (CU) or polyurethane foam (CUE). The collection includes elements without armrests, elements with right or left armrest, corner element, pouf and chaise longue. Removable cover in fabrics or leathers of the collection. An additional removable cover in Pelle Ovo, Tela Bianca or Tela Forte is also available. |
|
| “La michetta” is the most simple and least expensive bread baked in Milan. No two michettas are ever the same, and even when baked in tins, they always take on different shapes during rising and baking. Meritalia offers “La michetta” as a system of modular components, though mass-produced with industrial processes, it always remains unique due to the different arrangements and different manufacturing methods used for the individual elements – just like michettas. “La michetta” is characterized by the variety of compositions that can be achieved by simply grouping the individual pieces chosen in a free, personal way, with no preset scheme and no limitations. |
|
| The SF03 SHIRAZ sofa was inspired by loosely conjoined communication enhancing traditional Persian seating islands, as well as by classical seating furniture found in western salons and hotel lobbies. The SF03 SHIRAZ series underlies a flexible system of seating options that impressively harmonizes modern and traditional elements. The central element of this design concept is the ability to combine various backrests with different seating elements. Each module of the sofa set contains two elements: the base SF03 SHIRAZ (with or without a backrest, as desired) and the seat CU07 ELAM seat - an oversized down cushion that completes the sofa component. As resting accessories, we recommend the CU08 ARAM armrest and the CU06 NIMA cushion, available separately in variety of sizes. |
|
| Monobloc and sectional sofas with plywood frame and seat in polyurethane foam with steel springs. Upholstered with cold processed polyurethane foam and dacron. The back cushion is filled with down and latex. The final cover can be completely slipped off . The standard feet are cm.4 high and the optional feet, cm.12 high, are in anodised aluminium. The line is completed with a coffee table lacquered in the colours of our range. |
|
haus sofa system
description:
the haus sofa system presents luxury, proportion and comfort. its highly flexible modular pieces allow the creation of a wide variety of configurations, creating the perfect solution for the many unique requirements of a modern interior space. the system includes sofas in two sizes, a corner unit, a single unit and a pouffe.
item dimensions:
2 seater h 720 d 1000 w 2000 sh 480
3 seater h 720 d 1000 w 3000 sh 480
lhf 2 seater h 720 d 1000 w 2000 sh 480
rhf 2 seater h 720 d 1000 w 2000 sh 480
single unit h 720 d 1000 w 1000 sh 480
stool h 480 d 1000 w 1000
available in customer's own material, imitation leather or hb 5* leather with polished stainless steel leg detail |
|
The modular outdoor Natal Sofa by Tribů designer Wim Segers, lets everyones choose an individual sofa setting.
All backs can be replaced or removed to make a personal and trendy sofa in which everyone can relax...
High comfort combined with the best and durable materials make this sofa one of a kind.
|
|
Composition composed by left dormeuse, two seater central element, right dormeuse. W. 357 D. 156 H. 77,5 seat H. 43
From FAUST collection are available other elements that could be composed: side and central elements, two or three seater and angular element.
|
|
NATURALIST Design Klaus Hokamp
"Surprise instead of there won one always does not find it has expected" Wilhelm Bush 1832-1908
„NATURALIST" is a modern slip cover sofa with a royal charisma. The obtainable income also gives his owner the possibility of using change income. The softige seat comfort gives the owner the feeling of the pure luxury. It is the floor cushion that the cushions recover by themselves the special? |
|
This stylish combination of modules was designed by Rafa Garcia and provides comfort with great looks, thanks to the careful use of varying density foam and materials such as Fiberdream.
The wide variety of modules on offer makes UP! the ideal choice to fit any location. Details such as the optional back support height adjuster or the extra long chaise longue which, when combined with the long arm, offers extra seating room, means that UP! is both adjustable and can be customised to suit your tastes. |
|
With maximum modularity, the Insieme sofa lets you organize and re-organize the conversation area.
Combing basic elements, it is possible to create asymmetrical and contrasting effects. These can be further matched with People elements, which act as storage units and tops. |
|
| Ever since she created her DS-7 and DS-5 models, Antonella Scarpitta's name has stood for design that simply will not countenance the commonplace. In form and content, this new sofa follows on from the ideas behind her DS-5 and bears all the hallmarks of a design masterpiece, incorporating the inspiration of seeking aesthetic appeal in elegant simplicity. Its overwhelming attraction springs from a daring interplay of materials that harmoniously melds the steel geometry of its frame with the superlative smoothness of the leather upholstery. With its backrest slightly higher than in the DS-5, Antonella Scarpitta's new creation is the epitome of genuine excellence. Her inimitable design makes everything visible - an entire grammar of unencumbered form and understated elegance. The DS-4 is a clear affirmation by the designer of her commitment to plumb the depths of a particular style. Her skill lies not in continually producing different shapes and forms or flaunting a vast array of materials, but in her fundamental belief that furniture should be endowed with a clear identity. It is this concept that makes the seating Antonella Scarpitta creates so sublimely unique. |
|
ITALIAN ELEGANCE MEETS FUNCTIONAL MASTERY
This latest creation for de Sede by Italian designer Antonella Scarpitta is based on a lounge concept. She has designed a cubic sofa that is strictly reduced to the essentials. This transforms her new model into a timeless object for practical use as well as for decoration. Elegant lines, unparalleled seating comfort and a modular concept that makes for a wealth of potential applications are further attractive features of this outstanding sofa. In addition to its clean-cut form, this design also appeals thanks to its interesting, concealed function: the low rear-sections that are so typical for lounging can be folded upwards if required to provide comfortable back support - for instance, for reading. This unmistakable programme consists of three different sofas, five stools and four supplementary units which make it possible to create a wealth of different combinations - such as corner groups. |
|
| Structure: wood covered with poliuretane foam. Padding: various densities of ecological polyuretane foam covered with 100% dacron polyester padding. Arms in open foam (syntethic fibrefill). Covering: leather or microfibre. Removability: not available. Feet: shiny metal feet 10 cm high. |
|
FRAME: supporting frame in metal section, aluminium colour.
Multilayer and stopping panels in wood agglomerat.
SEAT SPRINGING: seat spring system with interwoven elastic belts.
Indeformable polyurethane foam in differentiated density without C.F.C., covered with layers of acrylic fibre of 100% polyester.
PADDING: indeformable polyurethane foam in differentiated density without C.F.C. covered with layers of 100% polyester fibre.
FEET: feet on polypropylene, colour black.
PECULIARITY: completely removable covering.
For the modular version the connection between the various units is realised by means of joint-pins that the frame is equipped with. Foostool with pivoting self-locking wheels made for trace prevention.The “Corner unit” and the “End long- chair” have got fix seat.The fix frame of the “End long-chair” does not allow the movement of the seat and the kidneyrest, while the headrest can be easily raised by hand. Sofas with 1 arm can be connected to the corner unit, to the end long- chair and the end footstool only. But they cannot be connected together between themselves. After the cut by means of an electronic system, each part of the cover is “seam matched” to ensure tight stitchings. All the elements have a fixed fitting under-cover beneath the covering. |
|
A design project based on the idea of fusing home technologies and furniture.
The sofas are designed to integrate the speakers (installed at the ends of the back) and the subwoofer, the bass control device (installed in the lower part of the armrest of larger size).
With their generous size, the upholstered elements are welcoming, comfortable and totally "pure": the appliances and connections are installed in easy-access spaces and elegantly concealed. |
|
sunny 2006
COLLECTION SUNNY CATEGORIES SOFA – CHAISELONGUE - OTTOMAN INTRODUCED 2006 FRAME IN METAL WITH PRESSED POLYURETHANE PADDING COVERED WITH A PROTECTIVE FABRIC LINING ARMREST / BACKREST WITH PADDING IN PRESSED POLYURETHANE COVERED WITH A PROTECTIVE FABRIC LINING AND WITH METAL INSERT. SEAT CUSHIONS POLYURETHANE AND DACRON. BACK CUSHIONS DOWN-FILLED. THROW PILLOWS DOWN-FILLED. UPHOLSTERY REMOVABLE FABRIC OR LEATHER COVERS. AVAILABLE ON REQUEST, WITH UPCHARGE, A MECHANISM TO MAKE ARMREST AND/OR BACKREST ADJUSTABLE. THE MECHANISM IS IN METAL COVERED WITH LEATHER IN THE COLOURS: BLACK, RUSSIAN RED, NATURAL, DARK BROWN ”TESTA DI MORO”, DARK BROWN “TESTA DI MORO” GRAINED, COLONY GRAINED. METAL CAPS FOR MECHANISM |
|
Model 2797 Qubit
Qubit – seating that invites you
to relax and unwind. The perfect
combination of aesthetic beauty
and comfort. With only three elements,
it is possible to put together
many different combinations.
Thanks to its compact size, Qubit
also offers a lot of room to stretch
out and relax in a small space,
and in combination with the long
stool, this sofa changes to a daybed
instantly. Two stool sizes, various
back support cushions and
two attachment element sizes
are available.
Design: zed. / Matthias Weber |
|
Wooden frame padded with stress-resistant polyurethane foam, pre-upholstered with laminated fabric.
Suspension by elastics belts.
Seat cushion in 30kg polyurethane foam for the base and 35kg for the up side, covered with Dacron fibre 250gr.
Back seat, joined to the structure of the sofa, in ZMB-25KG polyurethane foam.
Wooden legs in wenge.
Completely removable cover.
|
|
Beechwood and scandinavian hardpine frame, glued, screwed and dowelled. Beechwood feet. Stretch belts seat and back. Fully upholstered. Foam seat cushions. Feather and fibre back cushions.
|
|
The linear and elegant design of this extremely versatile model guarantees great comfort,
Versions in leather could have different stitching compared to those in fabric.
Most Natuzzi models are available as sofa beds, for people who want an elegant, comfortable sofa during the day and a practical bed at night; others have a manual or electric relax function for people who want total comfort.
Most armchairs are equipped with manual or electric relax functions, while some models also offer an extraordinary multi-massage function with three different treatments: stretching, tapping, and kneading. |
|
• Downy-soft cushions worked into ticking chambers with a filling of foam
rods and polyester fibres, reinforced by a supportive core of polyether foam
and a stabilizing wooden panel
• Seat in polyether foam, built up in coordinated layers varying in height and firmness, covered with a downy-soft mat worked into ticking chambers and filled with foam rods and polyester fibres
• Seat with wooden inner frame
• Coil spring support (upholstered bench without coil spring support)
• Coupling for modular sofa elements with suspension fitting
• Frame in matt brushed stainless steel |
|
-Totally removable covers.
- Structure: solid wood covered in 13mm HR 30 Kg Ultracel foam and 100g fibre.
- Seat: fitted with 80mm NEA webbing. Bi-section foam; lower section 130mm HR 40 Kg Ultracel with reinforced corners; upper section 50mm HR 30 Kg Ultracel.
- Back: bi-section foam; upper section HR 40 Kg Ultracel; front section HR 30 Kg Ultracel covered in 13mm HR 30 Kg Ultracel.
- Ref. H222A010, H222V010, P222A010 and P222V010: Ultracel HR 40 Kg foam on upper surface covered in Ultracel 13mm HR 30 Kg foam.
- Ref. H022E010 and P022E010: 200 Kg. agglomerated foam on upper surface covered in 13mm Ultracel HR 30 Kg foam.
- Solid beech feet stained in wengue.
|
|
|
|
