|
|
|
Syria proposes the same functioning system as Chicca but, thanks to its reduced dimension, it can be placed into medium-size rooms.
|
|
|
The Chicca stove is born from the idea to project a poliburner stove able to burn indiscriminately pellet, hazel nut shell and other dried biomasses. This innovation allows to surpass the monopoly held by the pellet of wood.
|
|
|
Medium polyburner stove, it is placed between Chicca and Syria stoves. Refined design enriched by a modern line, it is perfect for a young background. Coverings available: ceramics or stone. Model available from October 2008.
|
|
- Cleanburn "airwash" system using preheated air for combustion purposes which ensures clean glass and reduced emissions.
- Constructed using 5mm and 10mm plate steel with brick lined firebox.
|
|
- The COVE 2 offers a nominal 8kW output
- one simple air control - the Quattroflow® - push in to burn slower, pull out to burn harder
|
|
- The Island III is the largest model in the Island collection. Ideal for larger rooms and open plan areas this is a stove that can take half metre log lengths. A true wide-screen experience.
- one simple air control - the Quattroflow® push in to burn slower, pull out to burn harder
|
|
The Island range is a collection of clean burning and highly efficient stoves featuring:
- One simple air control - the Quattroflow® - push in to burn slower, pull out to burn harder.
- A cool to touch handle for safe and simple re-loading
- An ingenious converting grate system ensuring optimum fuel efficiency and clean and simple de-ashing.
|
|
- Cleanburn "airwash" system using preheated air for combustion purposes - ensures clean glass and reduced emissions.
- Single door with large ceramic glass panel for a full view of the fire, giving a big view of the fire for a small stove.
|
|
This is a true multi-fuel version of the iconic cast iron Jøtul F 3.
-Available in black paint only
-Comes with a plain door
-Has primary air control on the ash pan door and secondary air via the control at the top of the stove
-User friendliness comes as standard with this model
-It comes complete with an easy to remove bottom grate
-The Jøtul MF 3 redefines the word classic
|
|
Morsø 1126 is a further development of the popular classic 1124, which was designed by architect Fister Bang from Nykøbing Mors, Denmark.
A popular classic, now equipped with a cool handle and a soot-free glass door. Model 1126 has a high heat output and is one of Morsø's largest convection stoves. The stove is supplied with riddling grate, ash tray and ashpan for easy ash removal. The stove can be fired with wood, briquettes, coal or petroleum coke and efficiently heats up to 135 sq. m.
Technical data
%u2022 Convection system
%u2022 Soot-free glass door
%u2022 Primary air supply
%u2022 Secondary air
%u2022 Riddling grate system
%u2022 Ashpan
%u2022 Ash tray
%u2022 Removable handle
Fuel
%u2022 Wood
|
|
Perfectly finished with premium steel plate and the metallic black paint provides a sense of dignity. It'll service you for many years. Heat resistant glass, connecting with glass wash air, will apply you with the perfect view of combustion. Wood and other solid fuel can be used as the burning fuel to provide heat to your room.
Model Hf-907 Precision %u2161:
Overall Efficiency 77.5%
Max. CO Emissions 0.3%
Max Heat Output 42,000BTU(12 KW)
Heating Capacity up to 1100sq.ft./100sqm
Dimensions: 700 mm(H) * 530 mm(W) * 430 mm(D)
Wood Capacity: 4.5KG
Flue size: 150mm(6")
Net Weight: 102KGS
Top flue outlets
|
|
A medium-sized stove with simple, easy-to-use controls and offering durability and efficiency.
Heat output 6kW
Adjustable airwash system for clean glass
77% Efficiency
Preheated, controllable tertiary air control
Cool touch handle
Boiler option available
|
|
... see all the products in the category
Stoves
|
OUR STRONG POINTS:
- High efficiency generator on liquid or gas flue, with three flue passes, cooled combustion chamber, for the production of hot water for central heating, suitable for operation either connected to a traditional system or connected to a low temperature heating system, with a minimum return temperatur of 35°C.
- G20 cast-iron boiler body made up of elements to be assembled when installing the generator in the heating system.
- Steel casing painted grey by anaphoresis using epoxy powder paint.
- Modern and elegant lines.
ADVANTAGES OF THE GN4 N:
- High efficiency achieved by the combination of high technology and maximum constructional rationality.
- Special layout of the cast-iron body, and additional attachment that allows the boiler to be connected in two different ways, according to the traditional system or alternatively to a low temperature heating system.
- Fitted for two-stage burners.
- Wired for control unit.
|
|
|
|
|
|
The compact classic with biferral composite heating surface
The biferral composite heating surface of the Vitola 200 has become a benchmark for high quality and reliability. The Vitola 200 combines convenience and economy at a reasonable price, and is a milestone in the history of heating technology.
The Vitola 200 is compact in its dimensions. Balanced flue operation is now an option when the boiler is used in conjunction with a Vitoflame 200 (up to 33 kW).
Thinks for you and saves energy
Many boilers tend to be used all year round at a constant temperature. This results in huge losses, especially during the summer months when less energy is required. The Vitola 200 is different: its cast iron and steel biferral composite heating surface enables it to modulate the boiler water temperature to suit the outside temperature. When no heat is required, it shuts down completely, thus greatly reducing your heating bills.
Clean combustion
Emissions fall substantially below the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act when the Vitola 200 is used with the Vitoflame 200 oil burner. Optimum combustion chamber geometry and thorough flame burnout are the reason for these low emissions.
Benefits at a glance:
Ultra-low temperature oil fired boilers, 18 to 63 kW
Standard efficiency: 90 % (Hs) / 96 % (Hi)
Biferral composite heating surface for high operational reliability and a long service life
Clean combustion: Performs substantially better than the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act
|
|
For very high heat outputs of up to 19,200 kW the Buderus SB 825L condensing boiler is a premium quality choice. The boilers are simple to service and maintain with easy to access combustion chambers and heating surfaces ensuring straight-forward operation, life-long durability and overall system efficiency.
|
|
|
|
|
|
Reliable heat storage
We offer you solar storage tanks with capacities ranging from 150 to 750 litres. These are Type S water storage tanks equipped with two heat exchangers, which are used in solar heating systems for supplying domestic hot water.
In order to use the solar heat for space heating as well as providing hot water, so-called combination tanks (type K) are often used in private homes. These have an external buffer storage tank that contains a second, inner storage tank.
Optimum corrosion protection
The storage tanks have a double coating of enamel on the inside for optimum corrosion protection and in addition have a magnesium anode whose performance can be regularly controlled using a push-to-test button.
High solar yields through good layering
The high, slim form facilitates the layering of the heat in the storage tank, leading to higher solar yields. The flow-controlled cold and hot water connections are very effective in preventing turbulent mixing of the layers in the tank.
Low losses through high insulation
To ensure that the heat gained remains in the storage tanks, these are covered with a 100 mm-thick insulation jacket. The covers even have an insulation thickness of 150 to 180 mm (depending on the type of storage). In addition the tanks are equipped with 50 mm-thick floor insulation.
|
|
| ... products without information |
| |
OUR STRONG POINTS:
- High efficiency generator on liquid or gas flue, with three flue passes, cooled combustion chamber, for the production of hot water for central heating, suitable for operation either connected to a traditional system or connected to a low temperature heating system, with a minimum return temperatur of 35°C.
- G20 cast-iron boiler body made up of elements to be assembled when installing the generator in the heating system.
- Steel casing painted grey by anaphoresis using epoxy powder paint.
- Modern and elegant lines.
ADVANTAGES OF THE GN4 N:
- High efficiency achieved by the combination of high technology and maximum constructional rationality.
- Special layout of the cast-iron body, and additional attachment that allows the boiler to be connected in two different ways, according to the traditional system or alternatively to a low temperature heating system.
- Fitted for two-stage burners.
- Wired for control unit.
|
|
|
|
|
|
The compact classic with biferral composite heating surface
The biferral composite heating surface of the Vitola 200 has become a benchmark for high quality and reliability. The Vitola 200 combines convenience and economy at a reasonable price, and is a milestone in the history of heating technology.
The Vitola 200 is compact in its dimensions. Balanced flue operation is now an option when the boiler is used in conjunction with a Vitoflame 200 (up to 33 kW).
Thinks for you and saves energy
Many boilers tend to be used all year round at a constant temperature. This results in huge losses, especially during the summer months when less energy is required. The Vitola 200 is different: its cast iron and steel biferral composite heating surface enables it to modulate the boiler water temperature to suit the outside temperature. When no heat is required, it shuts down completely, thus greatly reducing your heating bills.
Clean combustion
Emissions fall substantially below the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act when the Vitola 200 is used with the Vitoflame 200 oil burner. Optimum combustion chamber geometry and thorough flame burnout are the reason for these low emissions.
Benefits at a glance:
Ultra-low temperature oil fired boilers, 18 to 63 kW
Standard efficiency: 90 % (Hs) / 96 % (Hi)
Biferral composite heating surface for high operational reliability and a long service life
Clean combustion: Performs substantially better than the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act
|
|
For very high heat outputs of up to 19,200 kW the Buderus SB 825L condensing boiler is a premium quality choice. The boilers are simple to service and maintain with easy to access combustion chambers and heating surfaces ensuring straight-forward operation, life-long durability and overall system efficiency.
|
|
| ... products without information |
| |
|
|
