|
|
OUR STRONG POINTS:
- High efficiency generator on liquid or gas flue, with three flue passes, cooled combustion chamber, for the production of hot water for central heating, suitable for operation either connected to a traditional system or connected to a low temperature heating system, with a minimum return temperatur of 35°C.
- G20 cast-iron boiler body made up of elements to be assembled when installing the generator in the heating system.
- Steel casing painted grey by anaphoresis using epoxy powder paint.
- Modern and elegant lines.
ADVANTAGES OF THE GN4 N:
- High efficiency achieved by the combination of high technology and maximum constructional rationality.
- Special layout of the cast-iron body, and additional attachment that allows the boiler to be connected in two different ways, according to the traditional system or alternatively to a low temperature heating system.
- Fitted for two-stage burners.
- Wired for control unit.
|
|
|
|
|
|
The compact classic with biferral composite heating surface
The biferral composite heating surface of the Vitola 200 has become a benchmark for high quality and reliability. The Vitola 200 combines convenience and economy at a reasonable price, and is a milestone in the history of heating technology.
The Vitola 200 is compact in its dimensions. Balanced flue operation is now an option when the boiler is used in conjunction with a Vitoflame 200 (up to 33 kW).
Thinks for you and saves energy
Many boilers tend to be used all year round at a constant temperature. This results in huge losses, especially during the summer months when less energy is required. The Vitola 200 is different: its cast iron and steel biferral composite heating surface enables it to modulate the boiler water temperature to suit the outside temperature. When no heat is required, it shuts down completely, thus greatly reducing your heating bills.
Clean combustion
Emissions fall substantially below the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act when the Vitola 200 is used with the Vitoflame 200 oil burner. Optimum combustion chamber geometry and thorough flame burnout are the reason for these low emissions.
Benefits at a glance:
Ultra-low temperature oil fired boilers, 18 to 63 kW
Standard efficiency: 90 % (Hs) / 96 % (Hi)
Biferral composite heating surface for high operational reliability and a long service life
Clean combustion: Performs substantially better than the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act
|
|
For very high heat outputs of up to 19,200 kW the Buderus SB 825L condensing boiler is a premium quality choice. The boilers are simple to service and maintain with easy to access combustion chambers and heating surfaces ensuring straight-forward operation, life-long durability and overall system efficiency.
|
|
|
|
|
|
Reliable heat storage
We offer you solar storage tanks with capacities ranging from 150 to 750 litres. These are Type S water storage tanks equipped with two heat exchangers, which are used in solar heating systems for supplying domestic hot water.
In order to use the solar heat for space heating as well as providing hot water, so-called combination tanks (type K) are often used in private homes. These have an external buffer storage tank that contains a second, inner storage tank.
Optimum corrosion protection
The storage tanks have a double coating of enamel on the inside for optimum corrosion protection and in addition have a magnesium anode whose performance can be regularly controlled using a push-to-test button.
High solar yields through good layering
The high, slim form facilitates the layering of the heat in the storage tank, leading to higher solar yields. The flow-controlled cold and hot water connections are very effective in preventing turbulent mixing of the layers in the tank.
Low losses through high insulation
To ensure that the heat gained remains in the storage tanks, these are covered with a 100 mm-thick insulation jacket. The covers even have an insulation thickness of 150 to 180 mm (depending on the type of storage). In addition the tanks are equipped with 50 mm-thick floor insulation.
|
|
| ... products without information |
| |
OUR STRONG POINTS:
- High efficiency generator on liquid or gas flue, with three flue passes, cooled combustion chamber, for the production of hot water for central heating, suitable for operation either connected to a traditional system or connected to a low temperature heating system, with a minimum return temperatur of 35°C.
- G20 cast-iron boiler body made up of elements to be assembled when installing the generator in the heating system.
- Steel casing painted grey by anaphoresis using epoxy powder paint.
- Modern and elegant lines.
ADVANTAGES OF THE GN4 N:
- High efficiency achieved by the combination of high technology and maximum constructional rationality.
- Special layout of the cast-iron body, and additional attachment that allows the boiler to be connected in two different ways, according to the traditional system or alternatively to a low temperature heating system.
- Fitted for two-stage burners.
- Wired for control unit.
|
|
|
|
|
|
The compact classic with biferral composite heating surface
The biferral composite heating surface of the Vitola 200 has become a benchmark for high quality and reliability. The Vitola 200 combines convenience and economy at a reasonable price, and is a milestone in the history of heating technology.
The Vitola 200 is compact in its dimensions. Balanced flue operation is now an option when the boiler is used in conjunction with a Vitoflame 200 (up to 33 kW).
Thinks for you and saves energy
Many boilers tend to be used all year round at a constant temperature. This results in huge losses, especially during the summer months when less energy is required. The Vitola 200 is different: its cast iron and steel biferral composite heating surface enables it to modulate the boiler water temperature to suit the outside temperature. When no heat is required, it shuts down completely, thus greatly reducing your heating bills.
Clean combustion
Emissions fall substantially below the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act when the Vitola 200 is used with the Vitoflame 200 oil burner. Optimum combustion chamber geometry and thorough flame burnout are the reason for these low emissions.
Benefits at a glance:
Ultra-low temperature oil fired boilers, 18 to 63 kW
Standard efficiency: 90 % (Hs) / 96 % (Hi)
Biferral composite heating surface for high operational reliability and a long service life
Clean combustion: Performs substantially better than the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act
|
|
For very high heat outputs of up to 19,200 kW the Buderus SB 825L condensing boiler is a premium quality choice. The boilers are simple to service and maintain with easy to access combustion chambers and heating surfaces ensuring straight-forward operation, life-long durability and overall system efficiency.
|
|
| ... products without information |
| |
|
|
