|
|
Economic, quiet, environmentally-friendly: Weishaupt oil condensing systems for steel and cast iron boilers take the heat energy contained in the combustion flue gases and feed it to the heating circuit. The effect is that your heating oil requirement drops noticeably. At the same time, emissions are significantly reduced. The flue gas condenses and is drained into the waste water system. The remaining flue gas can escape via inexpensive plastic pipes.
|
|
|
Reliable, efficient, long-lasting: The body of the Weishaupt Thermo Unit G boiler is cast in one piece. House owners value the heating unit, which has been proven 100,000 times, as a long-lasting partner and as an exemplary and reliable energy-saver.
|
|
The attractively priced three-pass boiler
Vitorond 100 is an advanced cast iron three-pass boiler at an attractive price. The optimised thermal insulation of the Vitorond 100, together with the Vitotronic control unit fitted on top, further reduce the installation time.
The sectional cast iron Eutectoplex heating surface represents high operational reliability. By offering even heat distribution, stress fractures are practically a thing of the past. The wide water galleries prevent sediment and boiling noises no longer cause a nuisance. The JetFlow system specifically guides the cool heating return through the whole boiler. This prevents cold zones and condensate being created at the back of the boiler. In critical areas, too, the boiler water temperature remains above the dew point.
Easy installation and maintenance
Resilient gaskets permanently seal the individual sections on the hot gas side. Also, the horizontal layout of the hot gas flues permits thorough and easy cleaning of the boiler.
Benefits at a glance:
Cast iron low temperature oil fired boilers, 18 to 100 kW
Standard efficiency: 89 % (Hs) / 94.5 % (Hi)
Eutectoplex heating surface for high operational reliability and a long service life
Economical and environmentally friendly through lowered boiler water temperature when the outside temperature rises
Cast iron sections with a resilient seal for permanent hot gas soundness
The JetFlow system specifically channels the cool heating return through the whole boiler, thereby preventing condensation and stress fractures
Simple and complete boiler maintenance through horizontal hot gas flue layout and easily removable turbulators
|
|
The compact classic with biferral composite heating surface
The biferral composite heating surface of the Vitola 200 has become a benchmark for high quality and reliability. The Vitola 200 combines convenience and economy at a reasonable price, and is a milestone in the history of heating technology.
The Vitola 200 is compact in its dimensions. Balanced flue operation is now an option when the boiler is used in conjunction with a Vitoflame 200 (up to 33 kW).
Thinks for you and saves energy
Many boilers tend to be used all year round at a constant temperature. This results in huge losses, especially during the summer months when less energy is required. The Vitola 200 is different: its cast iron and steel biferral composite heating surface enables it to modulate the boiler water temperature to suit the outside temperature. When no heat is required, it shuts down completely, thus greatly reducing your heating bills.
Clean combustion
Emissions fall substantially below the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act when the Vitola 200 is used with the Vitoflame 200 oil burner. Optimum combustion chamber geometry and thorough flame burnout are the reason for these low emissions.
Benefits at a glance:
Ultra-low temperature oil fired boilers, 18 to 63 kW
Standard efficiency: 90 % (Hs) / 96 % (Hi)
Biferral composite heating surface for high operational reliability and a long service life
Clean combustion: Performs substantially better than the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act
|
|
Type M233, low-pressure steam generator with a steam output of 2.6 to 4.5 t/h (1890 to 3270 kW).
Vitomax 200 is a low pressure steam boiler for a permissible operating pressure of 1 bar steam output: 2.9 to 5.0 t/h. In this output range, the Vitomax 200-LS covers the requirements of all applications demanding low pressure steam or heat, e.g. airconditioning and heating systems, commercial nurseries or other commercial applications. The Vitomax 200-LS is a three-pass boiler with low combustion chamber loading (< 1.2 MW/m³). This creates the ideal conditions for clean combustion with low nitrogen oxide emissions.
The Vitomax 200-LS benefits at a glance:
Three-pass boiler with low combustion chamber loading (< 1.2 MW/m3) - clean combustion with low nitrogen oxide emissions
Low radiation losses through 100 mm thick composite thermal insulation and fully water-cooled reversing chambers
Economical fuel consumption - boiler efficiency: 92 %
Excellent steam quality through large steam chamber, large evaporator and integral steam drier
High operational reliability through excellent natural circulation and safe heat transfer - supplied as standard with robust shipping and installation protection
Easy to service through large boiler door and easy accessibility during maintenance work
Walk-on cover on top of the steam boiler as part of the standard delivery - simplifies installation and maintenance
|
|
The ROTEX A1 is a fully new type of emission-burning heating boiler based on the most recent realizations/insights and developments of thermic science. The boiler body consists of a patented aluminium-special steel compound. Together with the round structural shape forces, the A1 has achieved capacities unknown up to the present. It allows condensation operation and emission-burning use for oil as well as for gas.
Benefit from the ROTEX advantages/plus points
With the ROTEX A1 the boiler generation of the future has begun.
No more rust or sooty scales on the surface and a new design
for a contemporary, modern heating area.
|
|
| ... products without information |
| |
|
|