|
|
Stone bench natural reconstituted.
Softened completion. Available in only one color, without dyes.
Protector: mineralisator.
Dimensions: L 250 cm, L 65 cm, HT 78 cm
|
|
USER-FRIENDLINESS and ELEGANCE
Bench doubles with file.
Together out of concrete polished terrazzo.
Line sober and purified to be integrated in an environment of quality.
Possibilté of different and complementary colors between base and the file.
|
|
A minimal, nondirecting, additional form to create a universe of relaxation and freedom of movement.
The elements join and dissociate to become simple base, armchair, duet conversation or bench.
Collection in Ductal ®, created by Charlotte & Jean-Jacques HUBERT, with Nicolas STERLING.
|
|
MODEL ARES
Produced & Material description Used
Park bench in stainless steel AISI 304 (AISI 316 upon request). Covered sitting and back from doghe in wood to rectangular section. Lateral legs, slabs of implantation to the ground and slabs in sagomate stainless steel of thickness 8mm with technology to the Laser. Pipes in stainless steel Ø30 for the incatenamento of carrying slabs.
Surface
Pickled stainless steel, satinatura 240 grain and electrochemical polishing for a perfect protector against the corrosive effects of the external atmosphere. Apt wood massello to for external use only color wengè or choice.
Implantation to the Ground
Slabs in stainless steel of anchorage for the screw implantation.
|
|
4-seat urban bench with armrests. All surfaces have more than one purpose: backrest, armrest, and also seat’s edges are optional surfaces for seating and leaning.
Frame support is made of galvanized steel plate, 8mm thick, laser cut and welded with 80-micron powder coat finishing; sable-noir colour.
Seat is made of three boards of 2150x200x40mm, backrest has two boards of 2350x200x40mm, and armrests two boards of 580/310x200x40mm. They are made either of solid bolondo, iroko wood or coppered pinewood.
Boards are fixed to the frame support by means of metric metallic components screwed on sockets in the boards.
Bench is fixed to the pavement by means of metallic components.
|
|
|
|
|
|
Bench of four places for exteriors, made completely with welded steel profiles.
Surface of seat of 2000x432 mm formed by the combination of steel profiles in the form of "T" and "L" of 80x80x8 mm, soldiers to the side armature, leaving a space of 8 mm between you lick.
Bread carré is available in two versions according to is its installation. It can be provided to be interlocked in the pavement, (200 mm under level 0 of the land) or can be provided to be fixed on the pavement, using specific stainless steel ironworks.
The empotrable version in the pavement can in addition incorporate as complement the endorsement: one Or invested, formed by the union of several profiles like used in the seat, and that with a length of 1680 mm locates the strongpoint to 980 mm of height, being separated of the seat 80 mm.
The bench is put under a process of galvanized by zinc immersion and epoxi is ended covering dust with a thickness of 150 microns.
Optionally, the bench can incorporate a species of rectangular cushion, made in theca wood or bolondo and measures of 550x430x30 mm that presents/displays you reduce that they allow the drainage of the water. This cushion can longitudinally be displaced on the surface of the seat, thanks to 4 elements of sliding, fixed to the wood by the part inferior of the bench, of such form that the cushion can be moved in the route which they allow the cracks of the seat, but in no case of being removed.
|
|
WEIGHT: 62 Kg.
LENGHT: 2 m. Possibility in other measures.
STRUCTURE: Tubular galvanised steel covered with polyamide reinforced with fibreglass predyed.
LEG: Diameter 120 mm.
CHAIR SUPPORT: Diameter 75 mm.
FIXING SYSTEM: By screwing CIRCULAR METALLIC PLATES, with three screws and metallic bolts supplied from factory. PLATES are galvanised and painted in same colour of legs.
NOTE: If you want to place the bench by embedment please indicate in your order.
COLOURS: Black, White, Green and Blue.
ANTI-ADHESIVE COVERING: Prevent the adherence of dust and adhesive labels: Easy to clean graffiti, indelible markers, etc, without chanting any properties.
NO MAINTENANCE required.
|
|
Material: Steel legs. Stainless steel screws.
Finish: It is treated with ferrus which guarantees a high resistance to the rust conforming to the spray salt fog test. RAL 9006 grey colour finished seat and black forge colour finished legs.
Recommended anchorage: M10 fixing bolts for anchoring to the ground, depending on the surface and the project.
Optional: With the city coat of arms or name on it.
|
|
Material: Legs, backrest and seat made of ductile iron.
Finish: It is treated with ferrus treatment, a protector process which guarantees a high resistance to the rust conforming to the spray salt fog test. Grey forge colour painted.
Recommended anchorage: M10 fixing bolts for anchoring to the ground, depending on the surface and the project.
|
|
STRUCTURE:
Welded T-shaped metal strips to form ribs with variable heights. Square tube supporting the strips on the ribs, in ST-52 grade steel. These metal parts are welded together and then hot-galvanised by immersion. Steel strips of the same quality screwed to the structure with stainless steel square headed screws.
FIXATION:
The bench is attached to a lateral support by mechanical or chemical plugs, depending on the type of support.
NUTS AND BOLTS:
In stainless steel.
|
|
Heavy-duty furnishings
Zero upkeep
Plastygo© polyvinyl-covered expanded metal
Vandal-resistant materials
Dries fast after rain
Color of legs: black
|
|
Stacking Bench
Shaped extruded aluminium smats for backrest and seat
Aluminium tubular frame
100% polyester baked anti-UV powder coating
All Fermob colours
|
|
Material: Ductile iron legs and 5 tropical wooden boards of 140x70 mm section. Stainless steel screws.
Finishing: Legs with a primed coat and two more of red forge oxiron. Tropical wood treated with lignus , a preventive fungicide, insecticide and water proofed product. Natural colour finish.
Recommended anchorage: M10 fixing bolts for anchoring to the ground, depending on the surface and the project.
|
|
Material: Ductile iron legs; 3 tropical wooden boards of 190x40mm and one board of 130x40mm. Stainless steel screws.
Finish: The legs are treated with ferrus which guarantees a high resistance to the rust conforming to the spray salt fog test. Grey forge colour finished. Tropical wood treated with a preventive product lignus fungicide and insecticide and water proofed.
Natural colour finished.
Recommended
anchorage: M10 fixing bolts for anchoring to the ground, depending on the surface and the project.
Optional: FSC certified tropical wood can be used if desired.
|
|
Material: Ductile iron legs; 6 tropical wooden boards of 110x35mm. Stainless steel screws.
Finish:The legs are treated with ferrus which guarantees a high resistance to the rust conforming to the spray salt fog test. Grey forge colour finished.
Tropical wood treated with a preventive product lignus fungicide and insecticide and water proofed.Natural colour finished.
Recommended anchorage: M10 fixing bolts for anchoring to the ground, depending on the surface and the project.
Optional:FSC certified tropical wood can be used if desired.
|
|
Koro 70/15
BENCH
Mangado, Francisco J.
Bc 2.60 m double BENCH.
Bc 2.6 m BACKLESS BENCH.
|
|
RS SNCF Agence des Gares – Jean-Marie DuthilleuL .98
Waiting seating system on beam with individual seat. Can be used indoor or outdoor (aluminium seat version).
Seats are made of injection moulded painted aluminium, aluminium and wooden slats, steel sheet metal, Teak, Wenge, black leather, black vinyl or fabric.
All other components (bases, brackets, beam and armrest) are either injection moulded or extruded aluminium, all powder coated.
Available with or without backrest and also as a perch.
Bases are available for fixing to floor, to wall or mobile. Available accessories: armrests, seat spacers, back to back beam.
|
|
|
The GIADA bench is made up of a pair of granite or marble stone supports, in various colours, dressed on the upper surface and sanded or bushhammered on the sides, and of a seat in exotic wood boards treated with water paints, supported by a frame in 70x70mm steel angle bars, hot-galvanized. Its surface is protected by special opaque mat varnishes. Weight 248
|
|
Material: Made of construction steel. 3 tropical wooden boards of 150 x 45mm. Stainless steel screws.
Finish: The legs are treated with ferrus which guarentees a high resistance to the rust conforming to the spray salt fog test. Silvery colour finished.
Tropical wood treated with a preventive product, lignus fungicide and insecticide and water proofed. Natural colour finished.
Recommended anchorage: M10 fixing bolts for anchoring to the ground, depending on the surface and the project.
|
|
Shaped aluminium slat seat
Steel frame
100% polyester baked anti-UV powder coating
Colour frame : black, anodic grey and savanna
Seat : all Fermob colors available
|
|
Cast stone
Roseate
Aci-etched and waterproofed
Free-standing
1.420 Kg.
|
|
|
Bilbao@ Material:reinforced cast stone, Color:granite grey. Finish :acid-etched and waterproofed. Fixing: anchored with crews. Weight: 712 Kg
|
|
Reinforced cast stone
White / black
Soft acid treated and waterproofed
Free standing
1.640 Kg. Bench
510 Kg. Cube
335 Kg. Single backrest
|
|
|
|
|
|
The Sedis seat, designed by Antonio Citterio with Toan Nguyen, gives you the choice of either sitting, or merely leaning, on either side and at two different heights, giving it various different uses, depending on your needs, how long you plan to stay and how intimate you are with other users. The seat and backrest are 40mm thick exotic wood treated with a water varnish, including the torsion version, the latter is made from independent, solid slats, therefore separately replaceable, have different shapes according to their position on the seat or backrest, with radii ranging from 20 to 150 mm. The angles are: lower seat = 3°, backrest = 13°, upper seat = 10°. The cast iron supports are sandblasted and polyester powder coated, where possible they are buried in the ground to give a lightness to the structure, or fixed externally through a 250x130 mm base plate with four holes to fix to the ground with bolts. The Sedis Torsion model, through its special form, allows up to 8 people, of which 4 can sit normally and 4 can lean.
Maximum dimensions of Torsion model / mm : L 2600 H 774, Hseat 455. Weight 88 kgs.
|
|
Bertjan Pot is one of the most inquisitive and surprising Young Dutch designers. He created "Slats"; a one and a two seater, with a well known design base but with an unexpected comfort in a surprising color range.
"All is made out of very basic material and although the materialisation is inevitable it is an often forgotten but integral part of the design process".
'Slats is transparent, looks sober and is unexpectedly comfortable.'
|
|
Wing is the result of a co-operation between Gelderland, Van der Sluis en Gispen International BV led by the inspiring designers Stefan Scholten en Caroline Baijings.
Wing as a piece of Furniture is not easily typified, but is an innovative solution for Group activities in and around coffee corners, break-out rooms, waiting rooms and the likes. The closest and possible best fitting description is "sit-stand-meet-chat-hang-seat". Distinguishing feature is the flowing lines of the design.
|
|
| ... products without information |
| |
|
|
