|
|
| Suspension lamp comprising a lightweight geometric frame in anodised metal, with blown satin glass elements. |
|
| Suspension lamp made of intersections of white or coloured metacrylate panels. Support in lacquered metal. |
|
TRACE
Andrea Garuti 2008
DIFFUSER
Ceramic.
• DIFFUSER COLOUR
White.
• CONSTRUCTION
White lacquered metal. |
|
Light is held in a stocking: Fit is an innovative design lamp that I Tre is presenting in 2007.
The eccentric and original nature is given by the hand made metal stylised stocking, which the lamp is suspended from. These industrial materials, that are not normally used in furnishings, have found an unusual interpretation in this lamp and with the unmistakeable style of Marc Sadler become a great design article.
The transparent blown glass diffuser is embellished with a satin finish band around the light source, which screens the light creating some very fascinating lighting effects.
All the different versions offer versatility and creativity in interior design, becoming very distinctive decorative items that will never pass unobserved. The lamp structure can be used suspended or on the wall, with a number of elements joined to a single point to create a sort of bunch, or distributed along a module for a regular and uniform effect.
Not just a simple lamp, but a number of different ones that can be constantly changed with a wide variety of solutions for stylish and unusual surroundings. |
|
Atlantic is the new collection of I Tre lamps. A very sober style and pure lines make these lamps stand out and are emphasised even further by the essential materials and white colour that are used.
The blown satin glass diffuser and white metal mounting give a heavenly, almost moonlike air to this extremely simple design lamp.
Available in the standard, ceiling-wall and table lamp versions, Atlantic is designed for I Tre by Paolo De Lucchi. The light is given off evenly into the room with that diffusion typical of blown and coated glass, which is extremely attractive and yet functional as well.
Once again I Tre has come up with a product that marries styling research and functions with the latest design trends. |
|
| A minimalist lamp characterised by the simple shape of its ring. The body is made from metal and holds three or five compact fluorescent bulbs; the lower diffuser made from plexiglass represents a silk-screening process that optimises the distribution of light, while the upper diffuser creates an upward indirect light. |
|
DIFFUSER
Blown and hand grounded glass.
DIFFUSER COLOUR
Silver, white, red bordeaux, brown, black layered, satinfinish or transparent
or crystal, mirror finish.
CONSTRUCTION
Grey lacquered metal, cable cm 180. The off-centre element is available.
Class 40 it can be installed on the track “Adatto” by using element B, on
the “Track System” by using element TS-303U.
Class 60 it can be installed on the track “Adatto” by using element A. |
|
AYERS S
Designed by Marco Piva
DESCRIPTION
Pendant lamp made of hand blown gloss glass in black, white and red. Pendant versions with brushed nickel and white finishes. |
|
GLÒ
Designed by Danilo De Rossi
DESCRIPTION
Hand blown in the old tradition of Murano glass, GLO' is a piece of art, as well as a lighting element.
GLO' is available in colors;
white smoked glass,
Cobalt Blue,
red,
light blue.
Also provided in matching glass is a hand-poured, free-form glass plate to place below the suspended "Drop" for added effect.
The mounting structure is available as a flush ceiling mount with conical canopy or with a recessed housing. |
|
RONDELLE
Designed by Rockwell Group
Suspended in the air, Rondelle gives the mysterious allure of a space station with its fifteen floating polycarbonate disks. There are four color options; bright orange, smoked grey, violet and deep amber.
The fluorescent light source is centered from top to bottom within a structure of 14 crystal ribbed spacer rings.
The hidden metal support has a polished chrome finish as does the conical canopy and metal tube detail containing the electronic ballast.
Swag option available. |
|
Aluminium and steel plate structure. 330° gyro adjusting system. Available in multi-lamp versions (halogen AR111). The Rolo series consists of fixtures designed and made for lighting commercial environments, shops and shop windows. Their uniqueness is the lamp unit that can be adjusted horizontally and vertically. It is possible to virtually illuminate each point of the surrounding space from a fixed point thanks to the movement which has all the complexity of an astrolabe. The range includes recessed, wall and ceiling fixtures, track lighting, pendant fixtures and floor lamps.
Emissions:Direct
Power supply:
Depending on the models, 12V power supply with using electronic transformers housed in the product. All versions with the integrated transformer can be dimmered directly on the primary circuit using a trailing edge dimmer (IGBT Techology).
Body:
Structure in 5 mm thick aluminium sheet. In the pendant versions, the steel wires with Wire Gripper ends are used to achieve millimetric adjustment.
Colours:Glazed grey. |
|
Version with light transmission louver (T.I.R). Opaline screen protected against ultraviolet rays. Fixtures with 1 hour permanent emergency device. The Aurelia indoor pendant fixtures are the latest generation of a widely used type of application. It is the special light diffuser that is new, made with a PMMA heart (poly methyl methacrylate) and enclosed in an aluminium core where the flow of energy exploits the reflecting properties of the translucent material. With a great luminous effect with a radiation quality that will astound you; the lights spreads throughout the room, discretely involving the observer. Another step forward in researching fixtures designed to model and control the light, moulding it as if it were a real material.
Light Sources:
Light Source Compact Fluorescent (TC-L) with socket 2G11 (24W).
Emissions:Direct-Indirect
Power supply:
There is a choice between electromagnetic and electronic control gears. The fixture is also available with an emergency light that lasts 1 hour.
Body:
Indoor pendant fixture, IP40 protection level, mounting two compact fluorescent lamps. The front screen is available in two versions: either with a very thick PMMA (polymethylmethacrylate) baffle that is able to take full advantage of all the internal reflection principles (it guides the light) where direct emission is achieved by exploiting the passage of light through the windows made in the baffle or with an opaline methacrylate screen. The front bezel is in aluminium, the back of the fixture is made in metal and polycarbonate; small rear windows through which the light escapes creating pleasant effects on the wall. Diffused light in the model with the |
|
Easy to change the lamp unit. Quick maintenance. Central bearing beam with cable passage. Iper is a reflected and partly direct lighting system, studied and implemented to illuminate big areas such as shopping centres, supermarkets and stores in general. Iper comprises a bearing channel designed for the installation of reflected light fixtures with four and two fluorescent lamps and wattages of 18W, 36W and 58W. The fixture consists of a top reflector in white varnished steel plate, stabilised to UV rays and a white mesh plate reflector complete with polycarbonate diffuser. High lighting levels are possible with Iper even at heights of over 5 metres. Environments can be illuminated without creating any irritating glare effects thanks to the reflected and partly direct lighting.
Light Sources:
Light Source Linear Fluorescent (T8) with socket G13 (18W).
Emissions:Diffuse
Power supply:Electronic control gears in all models
Body:
Bar in extruded silicon aluminium, supported by stainless steel wires complete with brackets. A steel parabolic reflector is applied to the bearing structure with sliding bolts. The optics unit consists of a steel structure with self-extinguishing ABS heads that sustain a galvanised square hole mesh housing a 0.3 mm thick opaline polycarbonate diffuser. A soft diffused light.
Colours:White.
Accessories:Joint. |
|
Joiin
Design Susanne Philippson 2007
Produzione 2007
Joiin explores the notion of weaving light. The design includes a series of curved surfaces that couple together to shade its light source. Up to three of these lampshades may be connected allowing their surfaces to interact, folding into itself like a ribbon of light. The textile used to cover the shade comes finely coated with tiny glass beads, appearing white like frost, when viewed from an angle. Therefore the lamp catches attention even when switched off since its surface reflects the light sources from the environment. The Joiin series includes a floor-lamp: h. 177cm, a small suspension shade: w.62, d. 37, h. 36 cm and a larger version: w.77, d. 48, h. 43 cm. Combinations are only possible with the small version. Joiin is available in black, white, silver/grey and orange. The floorlamp version is completely lacquered in the corresponding colour.
|
|
| Pendant luminaire FACTORY, for 1 x halogen metal-vapour lamp 70W with lampholder G12, direct emission, housing in aluminium profile, round, silver-grey, protection class I, protection degree IP20, with HPF High Power Faction control gear, with reflector Lexalite, transparent acrylic glass, without pendant (to be ordered separately), ø = 415mm, PL = 1010mm |
|
| Pendant luminaire GROOVE, for 1 x standard lamp 150W with lampholder E27, 230V, in aluminium, matt anodised, wide flood, with metall guarded special cable Protection class I, IP20 ø = 310 mm H = 435 mm PL = 1925 mm max. PL = 2360 mm |
|
BUZZILIGHT: an acoustical lantern made of upcycled felt with double faced colours and with a flexible shape to be defined by its owner.
This acoustical light object, can be delivered in both pendant and standing version.
The user can choose which colour to put on the outside and how high or how wide he wants to have it and change this at any time.
The Buzzilight is made of recycled PET-waste (grey felt) combined with 100% natural coloured woolfelt, folded around a pure aluminium structure. And so it contributes to keeping our environment clean. |
|
| STONE (Design by Josep Novell + Josep Puig) is a hanging lamp composed by a very light structure (that can be very easely height adjusted), that holds a polyethilene diffusor of meas. 80x55cm with a very organic shape, reminding a rolling stone; this makes it almost the sole hanging lamp with a non symetric shape!! Ideal for installations where one wants to give a fresher and unconventional style, without sacrifying a nice, smooth and minimalistic design. It houses a T5 tube of high performance (55w) that offers a smoth and shadowfree light. |
|
| BARE - Is a collection of 2 measures of table lamps with an opal mouth blown triplex glass and a chrome structure. The shade has a piviting system that allows a circular mouvement. The input cable is textile red colour covered, confering to the luminaidre a very contemporary outfit. There is also a transparent hand dimmer installed in the cable. |
|
| TULIP is a collection of hanging lamps with chrome structure and pressed transparent borosilicate glass. The shade is inspired from the old textile shades and applied this form to a modern material like the pressed transparent glass. The lamp can be height adjusted and allows max. 40W incandescent lamp. We produce a single, 2 lights and 3 lights pendant. Teh collection is completed with a table lamp and a floor reading lamp |
|
| DROP single pendant. With 180cm of cable and a 12V-20W lightsource surrounded by a mouth blown borosilicate transparent diffusor, with the shape in a falling water drop, is ideal for its use in installations where several light points are needed creating a mothern, clear and light atmosphere. The cable can very easely be shortened to the required length. |
|
Vague Stelle lamp -1983-
Antoni Moragas
Structure and bulbholders in polished and varnished brass or chromed brass. Pyrex tubes and stainless steel braided wires.
-Lamp for high ceilings, of Ø150cm (30 bulbs) and Ø100cm (18 bulbs), with Ø15cm rosette. Contain two concentric rings at one level.
Measurement: Ø100 or Ø150 x H. (Min.117-Max.250)cm
-Lamp for low ceilings, of Ø150cm (30 bulbs) and Ø100cm (18 bulbs), with Ø3’2cm rosette. Contain two concentric rings at one level.
Measurement: Ø100 or Ø150 x H. (Min.67-Max.120)cm
-Double lamp Ø150-100cm (48 bulbs), with Ø15cm rosette. Contain two concentric rings in each one of both levels.
Measurement: Ø150/100cm x H. (Min.186-Max.319)cm
-Triple lamp, Ø100-100-100cm (54 bulbs) and Ø150-150-150cm (90 bulbs), with Ø3’2cm rosette. Contain two concentric rings in each one of the three levels. It has an upper ring which support the cables that go to the ceiling.
Measurement: 150/150/150cm or Ø100/100/100cm x H. (Min.210-Max.393)cm
It is recommended that table clearance should be 150cm and floor clearance 190cm.
Tubular transparent bulbs E-14 of max. 25W/each one, 230V/50Hz.
Certified CE UNE-EN 60598-1
|
|
lamp chic miniums
a transparent pipe
an luminous source recessa
an illuminated diffuser
230 V MAX 50 W GU10 |
|
suspended lamp less is less
a thin cable supports a light bulb
material metal white man
230 V MAX 40 E27 |
|
ONA SERIES, HANGING LAMPS
The range of table and floor lamps in the ONA Series has been supplemented with ceiling-mounted and hanging lamps. These hanging lamps–as well as the ceiling-mounted models–come in different sizes; the smaller one is intended more for interior decoration, while the larger one, due to its size, has been designed for projects with large areas to cover.
The basic characteristic of these models is the simplicity of their design, along with the uniform diffusion of light all over the polyethylene shade (manufactured by means of rotary moulding).
They are fitted with E27 bulb holders and compact fluorescent 30 W. bulbs. The height is adjustable up to 1.545 mm. |
|
| Made in silicone, available in blue, orange, white or black color. 2 incandescent (MAX 2x100W) or low-energy consump (MAX 2x20W) E27 bulbs. Size 120x150x30cm. |
|
| Made in Tiffanys glued on metacrylate, available in 12 glass options (white, pale orange, dark blue, deep pink, pistachio green, sand, pale orange, lime green, beige, red, brown or black). 1 compact fluorescent GX53 bulbs (MAX 4x9W). Size 10x10x5, 5cm each shade and height 150cm. Options bulbs white, blue, red or green. |
|
| Coupole, by Tavazzani-Kassem for Alt Lucialternative. Suspension, diffuser in Alicrite (R) String Light avalilable white or brown. Diameter: 90 cm |
|
The new, entertaining and versatile hanging lamp that Archirivolto has designed for Alt Lucialternative is called Flan, an evocative name for its rounded light forms.
Pure volumes created by combining modular elements that form a very entertaining and customisable design. There are endless colour combinations available matching the polycarbonate shapes, which are in fashionable matt mocha and white, or translucent bright green and fuchsia, which give a very different lighting effect in the room. The matt coloured lamp gives a direct light downwards and upwards, to create a warm and welcoming atmosphere. The translucent coloured lamp lets the light through the coloured forms, lighting the surroundings with green or fuchsia, to create a fresh and informal environment.
Flan is chameleon like in its nature, supporting and expressing the taste and personality of whoever chooses it, creating original bright interiors while being very performing at the same time. |
|
| REGENCY, disegned by Alan Mitchell for Alt Lucialternative. Suspension lamp. Cotton thread lampshade avaliable in white, red or mocha. Central body in satin finish acrylic. Diameter: 85 cm. |
|
|
|
