- Building & Construction >
- Building material >
- Plasticizer admixture
Plasticizer admixtures
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with extended open time (C2E/S2). When ...
MAPEI
Reinforcing synthetic water-based latex, composed of polymers and water, for the aggregation of the virgin beads after the curing. It is specific to stabilize Politerm Wall, by spraying / blowing with the appropriate equipment Politerm® ...
Porogenous additive for the preparation of dehumidifying mortars with high transpiration. Liquid additive for thepreparation of dehumidifying morter. It is suggested to realize dehumidifying mortars ...
Inhibiting of salt blooming Colourless liquid based of solvents and additives for the prevention and elimination of salt blooming. It is suggested for highly porous structures, bricks, tufa and sandstone. It is particurarly ...
Synthetic resin-based latex in aqueous dispersion adhesion aid for cementitious mortars. For interiors and exteriors. advantages and features Solvent-free, odourless product Easy and fast application Reduced consumption Also suitable ...
Elasticising synthetic latex for cementitious adhesives. Suitable for underfloor heating. For interiors and exteriors. Product with low volatile organic compound emission rate. advantages and features Product with very low volatile ...
Liquid additive in aqueous dispersion for cementitious grouts. Suitable for underfloor heating. For interiors and exteriors. Product with low volatile organic compound emission rate. advantages and features Product ...
Eco‑friendly, water‑based latex for mineral mortars and slurry keys, ideal for use in GreenBuilding. Keraplast Eco P6 increases the adhesion of slurry keys and additional casting layers, ensuring the monolithic continuity of mineral ...
Mixture plasticizer by air occlusion in the mix. Composition Product containing treated resins for increased water solubility. Features and applications Construction of brick or block works, etc... (mortars ...
GRUPO PUMA
This stucco additive improves freeze/thaw stability of portland cement-based materials by increasing moisture resistance, adding strength to exterior cement plaster (stucco). Not for use with stucco mixes containing an ...
BASF USA
Description Ronafix is a British Board of Agrément approved admixture. When mixed with a controlled quantity of cement, sand, aggregate and water it produces a high strength polymer mortar for thin section, high strength, ...
Ronacrete Limited
Resiniferous additive for concrete; odourless and solvents free. Confers excellent mechanical features to concrete slabs and floor foundation. Avoids contraction and cracking phenomena. Purpose Particularly suitable ...
Elastic polymer latex in watery dispersion which, mixed with cement grout, improves its characteristics and increases adhesion to supports and flexibility by reducing the elastic module and waterproofing by reducing water absorption.
COLMEF
... coating; plasters with very low water absorption rate; coves at corners to allow subsequent waterproofing treatments As an additive on osmotic concrete to reduce its drying speed and increase its flexibility.
NORD RESINE
Curing admixture for cementitious mortar and concrete to reduce hydraulic shrinkage and the formation of micro-cracks. TECHNICAL DATA: Consistency: liquid. Storage: 12 months. Consumption: – mortar: 0.25% by weight of ...
MAPEI GB
Very useful products to optimize, stabilize the effects of foaming agents. They are essential to achieve the best results in the various technologies.
Day1 is a finishing aid that lubricates the surface for faster, easier finishing. Day1 can also extend workable time by 15 to 30 minutes, even under adverse conditions such as high wind, heat, or low humidity. Day1 eliminates the need ...
Solomon Colors
Additive to Increase Strength and Fluidity Increases fluidity or reduces water. Increases compressive strength. Use only with Rapid Set® cement products. FLOW Control is an additive that increases ...
MAIN DATA Reinforcing primer for cement-based screeds and cement-based mortar. APPEARANCE Transparent liquid STORAGE 12 months in dry place, protected from freezing and high temperatures FIELDS OF USE - Reinforcing treatment ...
... properties to concrete mixture that could not be found in any other bonding agent, admixture or modifier. It is liquid and it can be used as a bonding agent or additive mixture. Properties Bonding ...
Admixture formulated for making flexible cement. Used for the treatment of masonry joints, concrete, floor tiles, bricks, wood, etc. Can be painted. Consumption Mix ratio of 1 to 2 in weight with the cement 1 cm x 1 ...
EVERFAST
Bonding emulsion for the improvement of all properties of mortars and concrete DOMORESIN is an aqueous emulsion of styrene-butadiene copolymer latex (SBR), specially formulated for the use with cement mixtures. It is employed in mortar ...
Specially designed for improving mortar mechanical performance, SEM-LATEX offers many advantages: better adhesion to substrate, waterproofing, elasticity, abrasion resistance. BENEFITS • Always dilute SEM-LATEX as instructed for the ...
Description As an anti-gel universal concrete additive it prevents fresh concrete from freezing by increasing the heat of hydration. Usage Areas It is used for concreting at low temperatures up to -10° C, and when ...
EMULZER
FLUIBETON AR is a shrinkage-compensating admixture for concrete. It does not contain expansive agents but acts on the primary mechanism that causes shrinkage by actually "controlling" the evaporation of water from inside ...
DRACO
Concrete is the most important building material in construction industry. Expectations are high: as concrete have to resist heat, frost and water, and chemical attack from carbon dioxide gases, chloride ions and sulphates from aggressive ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining