Other materials

Thickness: 3, 4 mm

ALUCOBOND® PLUS is a composite panel consisting of two aluminium cover sheets and a mineral-filled polymer core. The superb properties of this material boost one’s inspiration and offer architecture a whole new range of solutions – whether ...

Thickness: 3, 4 mm

ALUCOBOND® A2 is our non-combustible aluminium composite panel used in architecture that fulfills the respective standards worldwide. Thanks to its mineral-filled core, ALUCOBOND® A2 meets the strict requirements of the fire regulations ...

Thickness: 6 mm - 25 mm

In contrast to conventional honeycomb composite panels, the system components of ALUCORE® are bonded in a continuous process. The material does not become brittle-hard but shows tough and resilient properties and excellent peel strength ...

Laterlite Expanded Clay is a lightweight aggregate (LWA), with insulating characteristics made by expanding special natural clays at high temperature (1200°C). Laterlite Expanded Clay is manufactured in different types and sizes, in granular ...

Laterlite Plus light insulating aggregates are composed of a special expanded clay, characterised by a very low capillarity which allows it to be hydrophobic, not retain water and therefore remain dry. Laterlite Plus insulating aggregates ...

Laterlite Agri special expanded clay pebbles for plants, hydroponics, drainage, gardening and growing in general are produced in a specific way to be chemically inert and pH neutral, which gives them chemical and physical characteristics ...

Country / Place: AT/Sölden Name of Project: Corso Living, 6450 Sölden Product Category: Room Divider Material: MDF 19mm Perforation: 50102 Colour: ...

High-performance cementitious adhesive with excellent deformation ability, no vertical slip and extended open time for the installation of ceramic and porcelain tiles, porcelain stoneware, large size slabs, mosaics and natural stone on ...

Cementitious adhesive for the installation of ceramic and porcelain tiles on indoor floors and walls, and on outdoor floors. Product with very low volatile organic compound emission rate. advantages and features Product with very ...

Cementitious adhesive for the installation of ceramic and porcelain tiles on indoor floors and walls, and on outdoor floors. Product with very low volatile organic compound emission rate. advantages and features Product with very ...

Thickness: 3 mm

The SWISSMDF Decor is a melamine-coated MDF board with a fully integrated, homogeneous material structure. The decorative panel features high strength and outstanding machining properties.

Thickness: 19, 22, 25 mm

The rough-sanded SWISSPFB composite board is compacted on both sides with thin HDF coating layers. The innovative composite makes it significantly stronger and more rugged than a standard chipboard panel. Thanks to its fine surface, the ...

Thickness: 3 mm - 40 mm

SWISSMDF raw is an MDF board which is the perfect basis for applications in dry areas. Thanks to its homogeneous surface, the raw MDF board is perfectly suited for melamine, laminates, films and varnishes.

SFT Adhesive is a solvent-free monocomponent and water-resistant glue easy to apply. ICOPAL SFT ADHESIVE is an Eco-Activ glue: black, single component, non toxic and solvent free. It has been specially developed for watertight gluing, ...

Thickness: 12, 20, 50, 80, 100 mm

Enlarged width (2500 x 900 mm) Fast installation on large areas Fewer element joints in the shower area Fewer panel joints that need to be reinforced and filled Also in a thicker version (50, 80, 100 mm) e.g. for quick construction ...

Thickness: 30, 50 mm

Hard foam support element with milling for installing underfloor heating pipes under ceramic surfaces Installation and insulating element in one Low installation heights – ideal for renovations Quick and easy installation No screed ...

Thickness: 30, 50, 55 mm

For every cabin model Consisting of multi-part floor element, multi-part substrate element and horizontal floor drain support MODUL-ROOM-L-BO.P floor construction, consisting of multi-part floor element, multi-part substrate element ...

Thickness: 12, 15, 18, 22, 25 mm

The first choice for roof superstructures, exterior and interior walls, ceilings, floors and trade fair construction: esb boards from elka, for healthy building and living. The esb board for load-bearing purposes in damp ...

Thickness: 12, 15, 18, 22, 25 mm

esb Plus - for certified, constructive timber construction and prefabricated house construction For all timber builders, elka offers the premium board esb Plus - the qualitative answer for healthy building and living. ...

Thickness: 22 mm

When it comes to load-bearing capacity, esb Cross-beams are the first choice According to DIN 18183-1 in 22 mm thickness and a standard size of 623 x 300 mm - the low-priced option to maritime pine. Unbeatable ...

Fast-drying composite glue for the isorocket® scaffold anchor. Can be used on masonry and concrete. 12 cartridges in the box. Fast-drying composite glue for the isorocket® scaffold anchor. Can be used on masonry and concrete for additional ...

High grab, ready-to-use, non-slip paste adhesive for ceramic tiles. For use on interior walls. Ideal for tiling on to plaster and plaster board backgroud. Where to use: Bonding of all types of porous bodied ceramic tiles and mosaics ...

Moisture-resistant wood glue for gluing end joints and wooden plugs in Dinesen planks. Never apply glue to the long sides of floor planks. You can find more information on how to use Dinesen Wood Glue in Dinesen’s “Installation” instructions. Contents 750 ...

A fire resistant adhesive is an essential resource for fire protection systems, ensuring that if a fire occurs, materials remain stable and intact to protect the structure. FIREPRO® Glue has been specially developed for fixing ROCKWOOL ...

Thickness: 6 mm - 19 mm

SERALIT EVOLUTION is an opaque or translucent glass, patterned with coloured ceramic enamel. The pattern is applied using a textile screen. The enamels used do not contain any dangerous metals* such as lead, cadmium, mercury or chromium ...

Elastan® (PU): High-quality and ultra versatile adhesive solutions Elastan® is a MDI-based binder/adhesive in the form of one or two component systems for various applications and substrates. BASF offers a complete portfolio of adhesives ...

Sealant for air- and gas-filled insulating glass. Meets requirements of EN 1279 (including part 3), EOTA ETAG 002 and EN 15434 CEKAL and SNJF VI-VEC recognised CE-marked Usage Ideal as a secondary edge seal for air and gas-filled ...

Professional roofing adhesive for flat roofs INSTA-STIK™ roofing adhesive can be used for the attachment of insulation boards and fleece-backed single-ply membranes to a variety of substrates on flat roofs*. INSTA-STIK™ is quick ...

The Royal Building System (RBS) is a modern system of erection of walls and building partitions which can satisfy high and still growing expectation of investors. Objects erected in the RBS technology can be easily assembled, kept clean, ...

Gerbert 2300 is a two-part reactive adhesive with low volatile organic compounds (VOC’s), designed for indoor and outdoor flooring installations. This adhesive aggressively adheres all types of floor coverings to properly prepared metal, ...

A high performance multi-purpose building board all the benefits of solid blockwork with the speed and flexibility of drywall techniques Square Edge Can be fixed to either timber or Din standard steel studwork

Thickness: 8 mm - 44 mm

Preserving the environment is one of our most important goals. SWL blockboards therefore have the most prestigious certificates. This applies to the sustainability of the raw materials we use as well as the particularly low emission ...

Solvent-based contact adhesive specifically designed for bonding RubberGard EPDM membranes to approved insulations, in addition to wood, metal, masonry and other acceptable substrates.

Thickness: 15, 18 mm

Kerto® LVL Kate is a strong and rigid roof decking panel which is an excellent substrate for various roofing materials. It can also be used as a multipurpose construction panel in various applications – for example, as bracing panels ...

Thickness: 13 mm - 60 mm

Absolute top-quality made of wood. High functionality and easy processing. Environmental awareness in purchasing and processing. Individual design scope for kitchens, furniture, ceilings, floors, walls, doors, drawers, windowsills and lots more.