- Building & Construction >
- Insulation and sealing >
- Polyisocyanurate (PIR) foam insulation
Polyisocyanurate (PIR) foam insulation
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Thermal conductivity: 0.021 W/(m.K)
Thermal resistance: 4.25, 5.45, 6.65 m²K/W
Length: 1,190 mm
Thermaclass Cavity Wall 21 is an easy to install, polyisocyanurate (PIR) insulation board for full fill cavity wall applications, with excellent thermal performance (0.021 W/m.K). Featuring ...
Length: 225 cm
Width: 122 cm
Thickness: 12.7 mm
... 12.7 mm thick, high-density, closed-cell polyisocyanurate (PIR) foam core laminated on both sides to a mineral coated fiberglass facer. The ISOGARD HD cover board spreads the load and protects the insulation ...
Holcim Elevate
Thickness: 4 cm - 12 cm
... of kg/m², reinforced in TNT polyester and slate chips’ finish The bonded panels GT 3 - GT 4 - GT 5 are suggested for insulation and as a waterproofing primer of flat and pitched roofs. Standard Dimensions: 1200 ...
Stiferite
Gonon Isolation AG (SA)
Gonon Isolation AG (SA)
Gonon Isolation AG (SA)
Thermal conductivity: 0.022 W/(m.K)
Thermal resistance: 1.35 m²K/W - 9.05 m²K/W
Length: 1,200, 2,400 mm
IKO enertherm ALU is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This ...
IKO
Thermal conductivity: 0.023 W/(m.K)
Thickness: 120, 110 mm
The ProSpan WRS is a high performance, CFC/HCFC - free, rigid, polyisocyanurate insulation of typical density 32 kg/m3. Manufactured to BS EN ISO 9001:2000 The board is faced on both sides with a low ...
Insulation made from PIR-foam, available in a broad variety for above rafter insulation on the roof and and floor insulation.
Thermal resistance: 1.85, 2.3, 3, 3.65, 1.15 m²K/W
Length: 240 cm
Width: 120 cm
... Gyproc ThermaLine PIR 63mm is a simple and cost-effective way to make spaces more comfortable and energy efficient. Our 78mm PIR backed board is a high performing thermal lining that's compact and ...
Thermal conductivity: 0.024, 0.025, 0.026 W/(m.K)
Thermal resistance: 0.96 m²K/W - 6.65 m²K/W
Thickness: 25 mm - 160 mm
CARLISLE® Thermal Insulation-T is a high performance tissue faced insulation board that has been specifically designed for use with award-winning RESITRIX® and HERTALAN® waterproofing membranes, in both ...
CARLISLE Construction Materials GmbH
... sheets integrated with metal panels and insulation in a complete metal roofing system. Metal panels bring unmatched durability. Insulation can build R-value into the system. Fabral technology has gone ...
FABRAL
KEMPERTHERM® is a CFC- and HCFC-free, rigid PIR insulation board used as part of the Stratex warm roof system with a dense, closed cell structure that gives excellent compressive strength and low thermal ...
Thermal conductivity: 0.023 W/(m.K)
Thickness: 3 cm - 12 cm
POLYSOL IP 35 PLUS is an insulating system obtained through the hot bonding of a smooth or mineralcoated plastomeric waterproofing membrane reinforced with glass fibre non-woven polyester fabric to sheets of foam ...
... seamless insulation ... for PUR(E) energy saving Insulating core made of PUR/PIR rigid foam Consistently high insulation values (TCL 023) ...
Thermal conductivity: 0.028, 0.025 W/(m.K)
Thermal resistance: 1.05 m²K/W - 6.4 m²K/W
Thickness: 30 mm - 160 mm
POLIISO® SB is a yellow thermal insulation panel made of rigid, closed-cell PIR foam, expanded between two supports: the top one is made of bituminized glass fiber and ...
Ediltec
Thickness: 25 mm
IKO Enerfoil sheathing wall insulation is a rigid, polyisocyanurate foam insulation with high thermal properties. It is constructed from closed cell polyisocyanurate ...
Thermal conductivity: 0.022 W/(m.K)
Length: 1,200 mm
Width: 600 mm
PIR Plita® – multipurpose energy-efficient insulation boards Rigid foam boards PIR Plita® are the insulation materials with the lowest thermal conductivity. Polyisocyanurate ...
PROFHOLOD
Thermal conductivity: min 0.0 W/(m.K)
λD = 0.023 W/m.K. For extreme insulation values, coated on both sides with an aluminium multi-layer complex. IKO Enertherm ALU is a 100 % CFC-free insulation board with a core of hard polyisocyanurate ...
ATAB
... ozone depletion potential (ODP) Manufactured in accordance with BS/IS EN 13165:2008 Thermal insulation products for buildings. Factory made Rigid Polyurethane Foam (PUR) products. Specification. BS ...
Xtratherm
Thermal conductivity: 0.027, 0.026 W/(m.K)
Thermal resistance: 1.1 m²K/W - 3.85 m²K/W
Thickness: 30 mm - 100 mm
A polyisocyanurate (PIR) isolation plate covered on both sides with a glass veil for application as a support to the weatherproofing on deck metal roofing, both new and for rehabilitation. CE marking ...
Thermal conductivity: 0.027, 0.026 W/(m.K)
Thermal resistance: 1.1 m²K/W - 3.85 m²K/W
Thickness: 30 mm - 100 mm
A polyisocyanurate (PIR) isolation plate with its topside covered with a complex of oxyasphalt and its bottom side with glass veil, for application as a support to the weatherproofing on deck metal roofing, ...
Thermal conductivity: 0.023 W/(m.K)
Thermal resistance: 1.75 m²K/W - 4.4 m²K/W
Thickness: 40 mm - 100 mm
A polyisocyanurate (PIR) isolation plate covered on both sides with 50 micron aluminium sheet for application as a support to the weatherproofing on deck metal roofing, both new and for rehabilitation. ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining