|
|
Prefabricated in factory with complete industrial tools, the components of frame RECTOR are elements of structure of high-quality out of concrete prestressed by adherent wire or reinforced concrete.
They are intended for the realization of frameworks of works by assembly of the elements between them, for other horizontal or vertical ready-made units, or for cast parts in place. They constitute whole or part of the resistant structure thus.
For the vertical elements of structure, they are posts height of stage or multilevel, of props of cladding and prémurs. For the horizontal elements, they are longitudinal beams, beams, breakdowns.
|
|
Beams have different notations according to their function and position.
They are measured in all different forms and dimensions, and manufactured most commonly as pre-stressed elements.
|
|
|
Precast beams are manufactured in a variety of sizes, shapes and lengths. They are used to construct skeletal building frames. The Consolis Group has standardized the cross-sectional dimensions of the products and normally they are prestressed. The prestressing force and the beam length is adapted to each specific project. The elements are provided with details and inserts for connections and other specific purposes, for example for fixings, openings, etc.
|
|
The buildings gantries are carried out out of reinforced concrete and are composed of three elements, except for the spans lower than 15 m which require only two elements. The gantries are run in metal formwork on a metal support. The reinforcement differs according to the span, the height and the load on the gantries.
The feet of the gantries are placed and run in the foundations prefabricated. This unit is filled with mortar resistant to the withdrawal.
The composition of the concrete is given in accordance with the applicable standards and satisfy standard NBN B15-001, class C40/50 strength and S500 steel.
|
|
The Zephir structural system is the latest and most developed output of the company%u2019s production research path; Zephir consists of microshed slabs, plane ground beams and closing reinforced concrete or sandwich gables.
The Zephir system was developed by our Precast Division in cooperation with the Faculty of Engineering in Parma, Italy: the output is a prestressed reinforced concrete element used in the roofing of wide surface areas; it has excellent technical and functional features and a high architectural value.
Its tubular section provides the product with a remarkable traverse camber stiffness, which envisages long-term window frame duration, while the wide surface base guarantees high stability and makes it particularly safe during installation.
Thanks to its high storage capacity and its shape, water, however abundant, flows naturally rapidly and effectively on it.
|
|
The Pegaso structural system%u2019s main feature is a plane prestressed reinforced concrete slab with an open edge and diminishing in cross-section. The Pegaso slab is combined with pillars (including PVC rainwater down-pipes and overhead travelling crane bracket if needed), TH ground beams and closing gables.
The Pegaso slab diminishing in cross-section allows water to flow through the external edges, thus bypassing the construction of inside building sewer and drainage systems; in the event of extraordinary rainfalls the extrados shape and width allow a remarkable storage capacity and a fast draining of waters.
|
|
The Argo structural system consists of a plane prestressed reinforced concrete slab with an open end; the slab is combined with pillars (including PVC rainwater down-pipes and overhead travelling crane bracket if needed), prestressed reinforced concrete %u201CTH%u201D ground beams, closing gables
The Argo diminishing cross-section allows water to flow on the external edges, thus bypassing the construction of inside building sewer and drainage systems; in the event of extraordinary rainfalls the extrados shape and width allow a remarkable storage capacity and a fast draining of waters.
|
|
|
|
|
|
This is the fruit of the constant commitment of Mabo in the research of new solution for prefabricated construction.Euroalares is a revolutionary roofing-tile, as a new interpretation of a well-known shape conjugating the transportability and the possibility of stacking with the lightness primary exigencies. The long study of the shape, investigating the morphologies that are far from the classic pre-assembled civil engineering, gives high level visual and plastic results, reminding the regularity of the arched multiple-spans and the contemporary realizations of the organic architecture.
description
Euroalares is revolutionary as regards its design, and all the aspects of the plant manufacture and manufacturing process.
We can see clearly in the tile a supporting and a supported part.
The main framework is constituted by two lateral arches in reinforced concrete, preassembled to the transversal little beams, to the supports and to the rectilinear and longitudinal chain placed in the centre line.
This main framework is braced suitably, inside the surface created amongst the arch, the chain and the transversal little beams. The surface of the tile is realized in light concrete; the material used combines a high fire resistance and a high insulating power, so this high performance element can assure a great thermal comfort without any following insulating manufacture.
|
|
Concrete roof elements (Double T units) are mainly used in residential construction and long span industrial and commercial buildings, such as sport halls. The Consolis Group produces two main types of elements: namely ribbed lightweight roof units and hollow-core slabs. These components are usually prestressed.
The main features of the elements are:
* Light weight due to slender cross-sections
* Large spans
* Smooth soffit
* Easy and quick to install
|
|
BEAMS TO H
Beams of roofing to constant section, with geometric profile to H, on which the tegoli they support to saddleback. On the credit side upper wing surface introduces a conformation to channel for the collection and digestion of meteoric waters.
|
|
|
|
|
|
The natural evolution of the system building is going over the role played till now, a simple executor of structures that must be covered and visible only after a second project phase of "adjustment". The ambition of the system building is to consider all the level of use of a building, to shape itself according to the natural light, the plant engineering and all the climatic requirements
description
The roofing-tile president has an "omega-shaped" cross section, where the vertical walls rise from the extrados to create a great natural drain of storm water. They have a swelling in the lower parts for an excellent spread of the prestressing reinforcement, a natural good support for any eventual ceiling element and a hidden platform for little cable ducts or fixing for eventual cases to place in the tile intrados. The finishing is semi washable white paint varnish on basis of aqueous anion resin.
Each tile is insulated in the extrados placing an insulating board on the slab; the waterproofing is realized through alluzinc plates fixed through an automatic stapling machine assuring a perfect sealing of the superimpositions.
The breadth of the flat surface offers many possibilities for a good practicability and sitting plants and machinery.
Some insulating ceiling plates are placed between the tiles and are surmounted by some cover slabs. This interspace represents an airing room with effect "cold roof" involving many good effects with regard to the interior thermal comfort.
|
|
| ... products without information |
| |
Industrial Concrete 0.5mm S-ST2568
Sizes: 305mm x 305mm (12" x 12")
Thickness: 2.5mm
Edge: Bevelled
Colour: Grey
Description: A realistic and naturally inspired stone that is perfectly suited to any contemporary interior.
|
|
Beton-Flame introduced the epoxy floor that has the same appearance as polished concrete.
Beton-Flame fits in with many styles. It si straightforward, sober and minimalist.
By using a combination of various natural materials and synthetic resins such as polyurethane and epoxy, we obtained a simple yet colourful poured floor without seams.
The disadvantages associated with classic polished concrete are now a thing of the past!
You can finally forget about layers in excess of 10cm, cracks, uneven surfaces and dust.
-Gives your interior a personal and dynamic touch.
-Has a unique pattern that encourages daring combinations.
-Is the perfect choice for offices, sales areas and home interiors.
|
|
Beton-Flame introduced the epoxy floor that has the same appearance as polished concrete.
Beton-Flame fits in with many styles. It si straightforward, sober and minimalist.
By using a combination of various natural materials and synthetic resins such as polyurethane and epoxy, we obtained a simple yet colourful poured floor without seams.
The disadvantages associated with classic polished concrete are now a thing of the past!
You can finally forget about layers in excess of 10cm, cracks, uneven surfaces and dust.
-Gives your interior a personal and dynamic touch.
-Has a unique pattern that encourages daring combinations.
-Is the perfect choice for offices, sales areas and home interiors.
|
|
Beton-Flame introduced the epoxy floor that has the same appearance as polished concrete.
Beton-Flame fits in with many styles. It si straightforward, sober and minimalist.
By using a combination of various natural materials and synthetic resins such as polyurethane and epoxy, we obtained a simple yet colourful poured floor without seams.
The disadvantages associated with classic polished concrete are now a thing of the past!
You can finally forget about layers in excess of 10cm, cracks, uneven surfaces and dust.
-Gives your interior a personal and dynamic touch.
-Has a unique pattern that encourages daring combinations.
-Is the perfect choice for offices, sales areas and home interiors.
|
|
Industrial Concrete 0.5mm S-ST2568
Sizes: 305mm x 305mm (12" x 12")
Thickness: 2.5mm
Edge: Bevelled
Price Band: Standard
Colour: Grey
Description: A realistic and naturally inspired stone that is perfectly suited to any contemporary interior.
|
|
| ... products without information |
| |
|
Polystyrene rigid foam panel extruded (XPS) of blue color, slotted on the two longitudinal sides and covered of a protector of 10 mm out of mortar modified cement, of strong mechanical resistance.
|
|
|
Polystyrene rigid foam panel extruded (XPS) of blue color, slotted on the two longitudinal sides and covered of a protector of 10 mm out of mortar modified cement, of strong mechanical resistance.
|
|
|
|
