DIN rail modules and controllers

The new Type 13.21.8.230.B000 multifunction relay is for integration into the Finder YESLY Smart home system. It features a volt-free 16A output contact, has the same functions as 13.22 and allows use with pushbuttons connected to ...

Voltage: 230, 400 V
Primary current: 5 A - 80 A

The 7M Series of energy meters are characterized by an innovative design, a backlit LCD display and NFC programmability through the dedicated Finder Toolbox NFC app. The new range of 7M Series energy meters comprises: -Five bi-directional ...

The 10 Series light dependent relays allow the lights to be switched on or off according to the natural lighting level and the set amount of LUX. This makes them ideal for the efficient control of street lighting or in public areas such ...

Completely silent For various lamp-types Made in Germany The 8122 series LED dimmers for external buttons dim in complete silence and also boast other attractive functions. The phase-controlled dimmers with soft-start and memory ...

Input voltage: 230 V
Output voltage: 24 V

BACHMANN MOV:E is an unusual yet clever mobile power supply. It features every standard connection and offers sufficient power for all common electronic devices used in everyday office life. If you don’t want to be restricted by the building ...

FLEXIBLE APPLICATION WITHIN THE SMART HOME The switch circuit board can be used in almost all areas of a smart home. It is suitable for switching conventional domestic appliances, lighting installations or garage door drives. Connected ...

Thanks to the high measuring accuracy even stand-by loads can be precisely measured Compact design offers easy installation in flush-mounting boxes or in surface-mounted junction boxes (e.g. ELS Spelsberg Abox 25) Comfortable control ...

Large switching capacity for high loads of up to 16 A Thanks to the high measuring accuracy, even stand-by loads can be precisely measured Compact design offers easy installation in flush-mounted boxes or in surface-mounted junction ...

AVE home automation controls and actuators of 44 Series guarantee performance and innovation for the management of lighting, shutters and automations. There are also practical AVE home automation kits for the creation of smart solutions.

AVE home automation accessories include AVEbus power supplies, isolators, AVEbus/USB interfaces, configuration cables and cables for AVEbus systems.

AVE innovation features KNX controls and actuators. Within its KNX home automation range, AVE offers various types of switches, touch and toggle controls, in addition to the main system modules, such as actuators and power supplies.

Input voltage: 35 V - 37 V
Output voltage: 36 V
Current: 1 A

Line driver module for DUO video imtercom systems. It allows to use third party regulated power supoply units as power source for DUO bus, providing even the correct line impedance.

Input voltage: 127 V - 230 V
Output voltage: 29 V
Current: 0.5 A

The power supply can power all devices with a proper audio, video and data impedance for the correct operation of the DUO system.

Input voltage: 127 V - 230 V
Output voltage: 21 V
Current: 1 A

Power supply for video 4+1 installations with electronic note call; it allows to supply in timer mode the system (about 100 sec.). Outputs protected against overloading and short circuits, able to supply timed power to 1 camera unit and ...

Input voltage: 12 V
Output voltage: 12 V

Input voltage: 230 V
Output voltage: 12 V
Power: 36 W

Input voltage: 230 V
Output voltage: 12 V
Power: 60 W

Power - 2000W Power supply - 230V Operating levels - From 50% to 100% Temperature min·max - – 20°C +50°C Degree of protection - IP54 Sizes [ mm ] - 145x115x55 Plug - No plug

Power - 3000W Power supply - 220V – 230V Operating levels - From 0% to 100% Temperature min·max - – 20°C +50°C Degree of protection - IP44 Sizes [ mm ] - 118x115x52 Plug - UE – UK – CH – US

KNX electronic digital switch for the management of electrical loads. It allows the time programming (daily, weekly, monthly or yearly) or astronomical. It allows to control 9 different channels on the KNX bus; the programming of channel ...

Interface for the bidirectional data connection between a PC or laptop and a KNX bus installation. It enables addressing, parameter setting, visualization, protocolling and diagnosis of KNX bus devices through ETS (Engineering Tool Software). ...

Voltage: 230, 240 V
Primary current: 0 A - 80 A

80A single phase compact energy counter for the measurement of the energy and the main electrical parameters in industrial and civilian application. Optical port for communication with other systems and the Modbus RS485 (EK-MC1-MD) and ...

Switching current: 370 mA

This module allows you to save on your facilities in three different ways: You save space: it takes up much less than if you use 18 individual relays You save on wiring: You no longer have to power and signal each individual relay. You ...

Simple module that allows the reading of PT1000 temperature probes to be taken wherever the probes are installed. Wide in 8 inputs for PT1000 probes plus any device with support for the Modbus RTU protocol.

With this device, the Adquio Ecosystem integrates all wireless probes, and does so with the latest technology. On the one hand, Adquio LoRa Sensors Gateway connects to any programmable controller that supports the Modbus RTU protocol ...

Recharging and storage platform for up to 12 Lamps. Durable polycarbonate construction provides a stable platform. (Trade pricing is shown) We’re here to help you find a tailored, professional lighting solution for your business. ...

Recharging and storage platform for up to 24 Lamps housed within a 2 tier plated steel trolley fully assembled with one power plug for mains connection. For pricing and purchasing. We’re here to help you find a tailored, professional ...

RECHARGING STATION (36 LAMPS) Recharging and storage platform for up to 36 Lamps housed within a 3 tier plated steel trolley fully assembled with one power plug for mains connection. (Trade pricing is shown) We’re here to help you ...

Easyclick PHC interface The Easyclick PHC interface permits bidirectional connection between the Easyclick radio transmitters and receivers and the PHC system, this includes connecting cable 30 cm, 72 mm wide (4 module widths). The Easyclick ...

4 channel DMX driver/dimmer for 350-1000mA constant current LED products. Drives RGB, RGBW, RGBA or 4 channels of single colour products. 2-12 LEDs per channel, depending on your choice of external power supply. 16 bits dimming curve ...

4 channel RGBW/RGBA DMX driver/dimmer for 12 24 VDC LED products. Maximum 5A per channel with a maximum total current of 10A. 16 bits dimming curve for extremely smooth dimming. DIN rail track mount system. Digital setting of DMX ...

Quick and cost-effective Installation: gain in terms of hardware and minimised installation cost avoiding the installation of a double IP and electrical network Powers IP cameras and sends IP data Allows PoE connection of up to 4 ...

Compatible with the lighting dimmer or dimmer bulbs (LED and halogen) Allows you to create lighting ambiances suited to your lifestyle Existing devices are kept, installation behind the switch with minimum work Energy-efficient modules Gradually ...

Suitable for public buildings, thanks to the various functions Warns users that the light is about to go out in a room, passageway, staircase, etc. Recommended for controlling an air vent in the toilet or bathroom, when lasting presence ...