Raised access floor structures

13 companies | 25 products
Raised access floors
  • Category
  • Material
  • Technical characteristics
raised access floor structure - MPH

Substructure with heavy stringers

The substructure with closed rectangular stringers...

raised access floor structure - BPC

Substructure with extra-heavy stringers

The ideal solution for maximum performances, which ensures rigidity...

{{productDetail[50197]}}
raised access floor structure - DELTAFLOOR

DELTAFLOOR is a fully removable raised access floor which is easy...

raised access floor structure - A

- Floor heights of 60 to 350mm
- For...

raised access floor structure - E

- Floor height: 350 to 1000mm
-...

high resistance raised access floor structure - ISOFLOOR

The specialised structure for technical rooms and data...

{{productDetail[66779]}}
raised access floor structure - SA

Structure consisting exclusively of adjustable galvanized...

{{productDetail[64682]}}
raised access floor structure - SA

The term "System " for raised floor should be seen as a set of parts combined with each other and which are composed of panels 600 x 600 mm precast and supported on a steel structure that may comprise only steel supports (pedestals ) or even steel perimeter grid (stringers). Each panel is based on the total Structure...

{{productDetail[52737]}}
raised access floor structure - CTR

- Composition of the structure: same as the CTA structure
- Base: same as the CTA structure
-...

raised access floor structure - CTT

- Composition of the structure: same as the CTA structure
- Base: same as the CTA structure
-...

raised access floor structure - POLI-P

Structure for outdoor installations
Fixed or adjustable structure made...

{{productDetail[52785]}}
steel raised access floor structure - STT EXTRA

The all-steel structure meets any installation need, especially since the diagonal stringer can be used to notably increase the access floor's static load resistance.
Moreover,...

{{productDetail[58116]}}
raised access floor structure - T6

The substructure Type 6 is suitable for installation heights of 500 to 800 mm. It consists of individual pedestals like Type 5 as well as additional loosely suspended strings. These increase...

raised access floor structure - T7

The substructure Type 7 is suitable for more demanding static requirements and for installation heights of 300 to 800 mm. It has individual pedestals like Type 5 as well as additional loosely suspended joists....

raised access floor structure - T8

The substructure Type 8 is based on a joist system of longitudinal and transverse profiles in a 600 x 600 mm grid, which have a friction-locked connection to the...

raised access floor structure - T8

In the field of electrical rooms, medium and low voltage rooms, command rooms, etc. the concentration of cables is particularly high. Advantages are brought here with access floors in conjunction with base frames. This means that electrical...

{{productDetail[58117]}}
steel raised access floor structure - UNIFIX

The Unifix access floor is elevated flooring formed by 600 x 600-mm steel panels with cold-drawn corners and cement cores installed by positive positioning and screwed onto height-adjustable, metal pedestals fixed to the sub-floor. It adapts to the needs of each building, facilitates...

raised access floor structure - FREELAY

The Freeway access floor is elevated flooring formed by 600 x 600-mm steel panels with cold-drawn corners and cement cores installed by positive positioning onto height-adjustable, metal pedestals fixed to the sub-floor. Recommended for use in buildings in which easy plenum access is required.
The...

steel raised access floor structure - STRINGERED

The Stringered access floor is elevated flooring formed by 600 x 600-mm steel panels with cement cores installed onto a grid of stringers screwed onto height-adjustable, metal pedestals fixed to the sub-floor. Can be installed to heights of up to 900 mm.
Recommended...

{{productDetail[57945]}}
raised access floor structure - STRINGERS

Stringers can be used to reinforce the static properties of the raised floor. There is a clip type, a bolted type, and clamp type stringers to choose from.
RO,...

{{productDetail[58396]}}
raised access floor structure - FIBRECORE

Designed specially for computer room & clean room

PVC...

raised access floor structure - CR1000

The system is composed of 4 main components:UniPanel (main panel), Base Connector, Central Cap and Flank Cap.
For installing below 10 cm (4"), CamassCrete? are available in 5 standard heights.
CR1000-40:height 4 cm (1.57")
CR1000-50:height...

{{productDetail[66800]}}
steel raised access floor structure -  K 1060 PB

To provide a cavity for laying wiring and communication cables, as well
as for air conditioning to office premises, computer centres, telephone exchanges.

Design
The structure for supporting...

{{productDetail[103842]}}
steel raised access floor structure - LYSAGHT QUIKA-FLOOR®

LYSAGHT QUIKA-FLOOR® is a fully engineered and certified steel sub-floor system. It is the steel alternative to conventional timber bearers and joists and is suitable for both...

{{productDetail[5607]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation