Raised access floor supports

14 companies | 25 products
Raised access floors
  • Category
  • What’s new?
    Submit
  • Materials
    Submit
  • Technical characteristics
    Submit

The special ST1D UNDERSTRUCTURE with anti-seismic...

Structure consisting exclusively of adjustable galvanized...

{{productDetail[64682]}}

DELTAFLOOR is a fully removable raised access floor which is easy...

- Floor heights of 60 to 350mm
- For...

{{productDetail[66779]}}

Substructure with heavy stringers

The substructure with closed rectangular stringers...

Substructure with extra-heavy stringers

The ideal solution for maximum performances, which ensures rigidity...

{{productDetail[50197]}}

Designed specially for computer room & clean room

PVC...

The system is composed of 4 main components:UniPanel (main panel), Base Connector, Central Cap and Flank Cap.
For installing below 10 cm (4"), CamassCrete? are available in 5 standard heights.
CR1000-40:height 4 cm (1.57")
CR1000-50:height...

{{productDetail[66800]}}

The term "System" in raised access flooring shall be considered as a set of pieces combined to each other, not one by one independently. All parts of the system are of great importance for the correct functioning and its excellent technical results.

GAMAFLOR...

{{productDetail[52737]}}

The substructure Type 6 is suitable for installation heights of 500 to 800 mm. It consists of individual pedestals like Type 5 as well as additional loosely suspended strings. These increase...

The substructure Type 7 is suitable for more demanding static requirements and for installation heights of 300 to 800 mm. It has individual pedestals like Type 5 as well as additional loosely suspended joists....

The substructure Type 8 is based on a joist system of longitudinal and transverse profiles in a 600 x 600 mm grid, which have a friction-locked connection to the...

In the field of electrical rooms, medium and low voltage rooms, command rooms, etc. the concentration of cables is particularly high. Advantages are brought here with access floors in conjunction with base frames. This means that electrical...

{{productDetail[58117]}}

The all-steel structure meets any installation need, especially since the diagonal stringer can be used to notably increase the access floor's static load resistance.
Moreover,...

{{productDetail[58116]}}

The Unifix access floor is elevated flooring formed by 600 x 600-mm steel panels with cold-drawn corners and cement cores installed by positive positioning and screwed onto height-adjustable, metal pedestals fixed to the sub-floor. It adapts to the needs of each building, facilitates...

The Freeway access floor is elevated flooring formed by 600 x 600-mm steel panels with cold-drawn corners and cement cores installed by positive positioning onto height-adjustable, metal pedestals fixed to the sub-floor. Recommended for use in buildings in which easy plenum access is required.
The...

The Stringered access floor is elevated flooring formed by 600 x 600-mm steel panels with cement cores installed onto a grid of stringers screwed onto height-adjustable, metal pedestals fixed to the sub-floor. Can be installed to heights of up to 900 mm.
Recommended...

{{productDetail[57945]}}

- Composition of the structure: same as the CTA structure
- Base: same as the CTA structure
-...

- Composition of the structure: same as the CTA structure
- Base: same as the CTA structure
-...

Structure for outdoor installations
Fixed or adjustable structure made...

{{productDetail[52785]}}

Stringers can be used to reinforce the static properties of the raised floor. There is a clip type, a bolted type, and clamp type stringers to choose from.
RO,...

{{productDetail[58396]}}

The access floor constructions of MERO type 2 for switchgear stations were developed in cooperation with electric engineers and power station...

{{productDetail[58120]}}

To provide a cavity for laying wiring and communication cables, as well
as for air conditioning to office premises, computer centres, telephone exchanges.

Design
The structure for supporting...

{{productDetail[103842]}}

LYSAGHT QUIKA-FLOOR® is a fully engineered and certified steel sub-floor system. It is the steel alternative to conventional timber bearers and joists and is suitable for both...

{{productDetail[5607]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation